The tariff classification of veneered base moldings from Germany
Issued July 14, 2004 by U.S. Customs and Border Protection.
Tariff classification
HTS codes: 4418.90.4590
Headings: 4418
Product description
The products are base moldings that fit between a floor and a wall. The samples consist of continuously shaped pieces of wood having a uniform profile throughout their length. The profile is wider on the bottom and has a shaped face. The back of the profile incorporates two grooves and a quarter round hollow on the bottom edge for the concealment of wires and cables. Style # SL 8 measures approximately 1-3/4” diagonally from the top to the bottom. Style # SL 9 measures approximately 2-1/2”. The moldings are composed of a solid spruce - pine core and a real wood veneered face. The samples have a maple veneer; however, the brochure lists a variety of different veneers that may be imported.
CBP rationale
The applicable subheading for the veneered skirtings # SL 9 and # SL 8 will be 4418.90.4590, Harmonized Tariff Schedule of the United States Annotated (HTSUSA), which provides for builders’ joinery and carpentry of wood, other.
Full text
NY K87517 July 14, 2004 CLA-2-44:RR:NC:2:230 K87517 CATEGORY: Classification TARIFF NO.: 4418.90.4590 Ms. Debra Flock Kuehne & Nagel, Inc. 668 Marina Drive, Suite B7 Charleston, SC 29492 RE: The tariff classification of veneered base moldings from Germany Dear Ms. Flock: In your letter dated June 18, 2004, on behalf of the importer, Parador USA Inc., you requested a tariff classification ruling. The ruling was requested on wood products identified as skirtings # SL 9 and # SL 8. Representative samples and a brochure were submitted. The products are base moldings that fit between a floor and a wall. The samples consist of continuously shaped pieces of wood having a uniform profile throughout their length. The profile is wider on the bottom and has a shaped face. The back of the profile incorporates two grooves and a quarter round hollow on the bottom edge for the concealment of wires and cables. Style # SL 8 measures approximately 1-3/4” diagonally from the top to the bottom. Style # SL 9 measures approximately 2-1/2”. The moldings are composed of a solid spruce - pine core and a real wood veneered face. The samples have a maple veneer; however, the brochure lists a variety of different veneers that may be imported. The applicable subheading for the veneered skirtings # SL 9 and # SL 8 will be 4418.90.4590, Harmonized Tariff Schedule of the United States Annotated (HTSUSA), which provides for builders’ joinery and carpentry of wood, other. The rate of duty will be 3.2 percent ad valorem. The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request. This position is clearly set forth in 19 CFR 177.9(b)(1). This section states that a ruling letter is issued on the assumption that all of the information furnished in the ruling letter, either directly, by reference, or by implication, is accurate and complete in every material respect. This ruling is being issued under the assumption that the subject goods, in their condition as imported into the United States, conform to the facts and the description as set forth both in the ruling request and in this ruling. In the event that the facts or merchandise are modified in any way, you should bring this to the attention of U.S. Customs and Border Protection (CBP) and you should resubmit for a new ruling in accordance with 19 CFR 177.2. You should also be aware that the material facts described in the foregoing ruling may be subject to periodic verification by the CBP. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Paul Garretto at 646-733-3035. Sincerely, Robert B. Swierupski Director, National Commodity Specialist Division
More rulings on the same tariff codes
The tariff classification of wooden posts for staircases from Canada
The tariff classification of spindles and handrails from Canada
The tariff classification of edge-covered plywood door jamb sides and headers from China
The tariff classification of pre-finished solid wood flooring from China
The tariff classification of edge-glued exterior door jambs and flat jambs from China
The tariff classification of a wooden window sash and frame assembly and the separate components from Canada
The tariff classification of veneered wood moldings from China.
The tariff classification of prefinished solid oak flooring from China
The tariff classification of solid hardwood flooring from China
The tariff classification of wood siding from Canada.
Searching CBP rulings the smart way
TariffLens semantically searches all 200,000+ CBP rulings, surfaces the ones that actually match your product, and builds defensible classifications backed by ruling citations.
Book a demo →