The tariff classification of prefinished solid oak flooring from China
Issued November 25, 2005 by U.S. Customs and Border Protection.
Tariff classification
HTS codes: 4418.90.4590
Headings: 4418
Product description
The samples consist of solid wood boards of oak species (Quercus alba) measuring 3-1/4” wide x 11/16” thick. The boards are tongued and grooved on the edges and will be tongued and grooved on the ends in their imported condition. The boards also have two grooves running lengthwise down the bottom surface. The top surface is stained (with four different stains according to the four different styles) and coated with various materials resulting in a hard finish. The coatings are identified as a UV-PU Insulation Coat, a UV-Filler Transparent Pumpable, a UV-Duro Sealer, a UV-Sealer Sandable and an HPC Anti Scratch Topcoat.
CBP rationale
The applicable subheading for the four styles of solid oak flooring described above will be 4418.90.4590, Harmonized Tariff Schedule of the United States Annotated (HTSUSA), which provides for builders’ joinery and carpentry of wood, other.
Full text
NY L88584 November 25, 2005 CLA-2-44:RR:NC:2:230 L88584 CATEGORY: Classification TARIFF NO.: 4418.90.4590 Mr. Hung Tran FloorEx International LLC 1725 S. Broad St. Philadelphia, PA 19148 RE: The tariff classification of prefinished solid oak flooring from China Dear Mr. Tran: In your letter dated October 27, 2005 you requested a tariff classification ruling. The ruling was requested on four styles of solid oak flooring identified as “Oak Natural Prefinished Solid”, “Oak Butterscotch Prefinished Solid”, “Oak Gunstock Prefinished Solid” and “Oak Wheat Prefinished Solid.” Representative five inch long sample pieces were submitted. The samples consist of solid wood boards of oak species (Quercus alba) measuring 3-1/4” wide x 11/16” thick. The boards are tongued and grooved on the edges and will be tongued and grooved on the ends in their imported condition. The boards also have two grooves running lengthwise down the bottom surface. The top surface is stained (with four different stains according to the four different styles) and coated with various materials resulting in a hard finish. The coatings are identified as a UV-PU Insulation Coat, a UV-Filler Transparent Pumpable, a UV-Duro Sealer, a UV-Sealer Sandable and an HPC Anti Scratch Topcoat. The applicable subheading for the four styles of solid oak flooring described above will be 4418.90.4590, Harmonized Tariff Schedule of the United States Annotated (HTSUSA), which provides for builders’ joinery and carpentry of wood, other. The rate of duty will be 3.2 percent ad valorem. The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request. This position is clearly set forth in 19 CFR 177.9(b)(1). This section states that a ruling letter is issued on the assumption that all of the information furnished in the ruling letter, either directly, by reference, or by implication, is accurate and complete in every material respect. This ruling is being issued under the assumption that the subject goods, in their condition as imported into the United States, conform to the facts and the description as set forth both in the ruling request and in this ruling. In the event that the facts or merchandise are modified in any way, you should bring this to the attention of U.S. Customs and Border Protection (CBP) and you should resubmit for a new ruling in accordance with 19 CFR 177.2. You should also be aware that the material facts described in the foregoing ruling may be subject to periodic verification by the CBP. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Paul Garretto at 646-733-3035. Sincerely, Robert B. Swierupski Director, National Commodity Specialist Division
More rulings on the same tariff codes
The tariff classification of wooden posts for staircases from Canada
The tariff classification of spindles and handrails from Canada
The tariff classification of edge-covered plywood door jamb sides and headers from China
The tariff classification of pre-finished solid wood flooring from China
The tariff classification of edge-glued exterior door jambs and flat jambs from China
The tariff classification of a wooden window sash and frame assembly and the separate components from Canada
The tariff classification of veneered wood moldings from China.
The tariff classification of solid hardwood flooring from China
The tariff classification of wood siding from Canada.
The tariff classification of wood posts, corners and corbels, all made of glued-up lumber, from Canada.
Searching CBP rulings the smart way
TariffLens semantically searches all 200,000+ CBP rulings, surfaces the ones that actually match your product, and builds defensible classifications backed by ruling citations.
Book a demo →