The tariff classification of Engine Flange Sealants from Germany
Issued January 14, 2026 by U.S. Customs and Border Protection.
Tariff classification
HTS codes: 3214.10.0020
Headings: 3214
Product description
In your submission, the subject sealants are described as aftermarket industrial sealing products manufactured by Henkel under the Loctite brand, specifically Loctite 5900 and Loctite 5910 Engine Flange Sealants. The products are silicone-based, non-corrosive sealing compounds designed for use in engine flange sealing and industrial machinery applications. They are used to form flexible, oil-resistant gaskets between metal surfaces in engines and industrial equipment. These products are not designed for use as consumer adhesives and are not intended for household or retail consumer applications. Their principal use is in industrial maintenance, repair, and overhaul (MRO) operations, including automotive engines, agricultural machinery, and industrial equipment.
CBP rationale
The applicable subheading for the Engine Flange Sealants will be 3214.10.0020, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Glaziers’ putty, grafting putty, resin cements, caulking compounds and other mastics: Mastics: Other.
Full text
N357206
January 14, 2026
CLA-2-32:OT:RR:NC:N3:136
CATEGORY: Classification
TARIFF NO.: 3214.10.0020
Altug Altindal Gaia Global Pazarlama Hizmetleri Altug Altindal Oruc Reis Mah. Tekstilkent Blok D:246 Esenler Istanbul 34235 Turkey RE: The tariff classification of Engine Flange Sealants from Germany Dear Mr. Altindal: In your letter dated December 19, 2025, you requested a tariff classification ruling on Engine Flange Sealants . In your submission, the subject sealants are described as aftermarket industrial sealing products manufactured by Henkel under the Loctite brand, specifically Loctite 5900 and Loctite 5910 Engine Flange Sealants. The products are silicone-based, non-corrosive sealing compounds designed for use in engine flange sealing and industrial machinery applications. They are used to form flexible, oil-resistant gaskets between metal surfaces in engines and industrial equipment. These products are not designed for use as consumer adhesives and are not intended for household or retail consumer applications. Their principal use is in industrial maintenance, repair, and overhaul (MRO) operations, including automotive engines, agricultural machinery, and industrial equipment. The applicable subheading for the Engine Flange Sealants will be 3214.10.0020, Harmonized Tariff Schedule of the United States (HTSUS), which provides for Glaziers’ putty, grafting putty, resin cements, caulking compounds and other mastics: Mastics: Other. The general rate of duty will be 3.7% ad valorem. The duties cited above are current as of this ruling’s issuance. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided at https://hts.usitc.gov/. This ruling does not address the applicability of any additional duties, taxes, fees, exactions and/or other charges, which may apply to the goods discussed herein. This includes, but is not limited to, tariffs and other duties as provided for in Subchapter III to Chapter 99, HTSUS. Thus, for example, in addition to the classification stated above, the merchandise covered by this ruling may also need to be reported with either
the Chapter 99 provision under which an additional tariff applies or one of the Chapter 99 provisions covering exceptions to such tariffs. For further information to assist with the importation process, please refer to the frequently updated Cargo Systems Messaging Service (CSMS) messages at https://www.cbp.gov/trade/automated/cargo-systems-messaging-service and Frequently Asked Questions on the Trade Remedy/IEEPA page at https://www.cbp.gov/trade/programs-administration/trade-remedies/IEEPA-FAQ. The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations (CFR), Section 177.9(b)(1). This section states that a ruling letter is issued on the assumption that all of the information furnished in the ruling letter, whether directly, by reference, or by implication, is accurate and complete in every material respect. In the event that the facts are modified in any way, or if the goods do not conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and Border Protection (CBP) and submit a request for a new ruling in accordance with 19 CFR 177.2. Additionally, we note that the material facts described in the foregoing ruling may be subject to periodic verification by CBP. This ruling is being issued under the provisions of Part 177 of the Customs and Border Protection Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, please contact National Import Specialist Nuccio Fera at [email protected].
Sincerely,
(for) Evan Conceicao Designated Official Performing the Duties of the Division Director National Commodity Specialist Division
More rulings on the same tariff codes
The tariff classification of SILCOR® 900HA Part A & Part B from Belgium
The tariff classification of Teroson PU8599 Adhesive Sealant from Germany
The tariff classification and country of origin of Silicone Sealants from China
Eligibility for duty-free treatment under subheading 9817.00.96, Harmonized Tariff Schedule of the United States (HTSUS), of a “Ostomy Appliance Belt” and “Stomahesive Paste”
The tariff classification of “SEALANT COMPOUND ELECTRICAL SCOTCHKOTE 15 OZ” from India
The tariff classification of “ROOF REPAIR” from Canada
The tariff classification of “Regular Plastic Cement” from Canada
The tariff classification of “Asphalt Restorer 2 and 5 Years” from Canada
The tariff classification of “Sopraseal LM 200 S” from Canada
The tariff classification of “Silcor Primer EPF Part A & Part B” from Belgium
Searching CBP rulings the smart way
TariffLens semantically searches all 200,000+ CBP rulings, surfaces the ones that actually match your product, and builds defensible classifications backed by ruling citations.
Book a demo →