7409.21.00
In coils
Copper plates, sheets and strip, of a thickness exceeding 0.15 mm: Of copper-zinc base alloys (brass)
Data provenance: Rates from HTS Revision 16 (Aug 15, 2026); trade measures verified against CBP CSMS and Federal Register notices through Aug 15, 2026.
Duty rates
Column 1 (General / MFN)
1.9%
Column 2 (Non-NTR)
9%
Column 1 (Special / FTA)
Free
Eligible
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.90.09
35%
ActiveArticles the product of the Russian Federation, as provided for in U.S. note 30(c) to this subchapter and as provided for in the subheadings enumerated in U.S. note 30(d) to this subchapter
Applies to origin: RU, BY
Effective from April 5, 2025
Rate-change history
What the rate was before, and when it changed. The government schedule replaces each revision in place; we keep the timeline.
-
SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals
Section 232 copper scope expanded: 80 HTS codes added under combined-metals framework
See the change → -
NEW_PROGRAM Proclamation April 2, 2026 - Combined Metals
Combined Section 232 metals framework introduced — 16 new Chapter 99 codes (9903.82.02–17)
See the change → -
NEW_PROGRAM Executive Order Feb 1, 2026 — Reciprocal Tariff (FR 2026-03824)
Section 122 reciprocal surcharge in effect — additional 10% on most imports through July 24, 2026
See the change → -
Base rate HTS 2023
Column 1 general rate set to 1.9%.
Related CBP rulings
The tariff classification of copper alloy hollow bars, solid bars, and rectangular wear plate from Spain
The products to be imported are identified as C95400 Aluminum Bronze (9C) hollow bars, solid bars, andrectangular wear plate for use in oil and gas, automotive, construction, marine, and other industrial equipmentand components. According t
Country of Origin and UKFTA Eligibility of the Posha Autonomous Cooking Appliance
Country of Origin and UKFTA Eligibility of the Posha Autonomous Cooking Appliance
The tariff classification and applicability of 9802.00.60 to cartridge cups, projectile cups, and cartridge strip manufactured from scrap gathered in the United States, processed in India, and returned to the United States for further processing
are modified in any way, or if the goods do not conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and Border Protection (CBP) and submit a request for a new ruling in accordance with 19 C.
The country of origin and status under the United States-Mexico-Canada Trade Agreement (USMCA) of copper alloy strip
Representative samples were included with your submission and will be returned to you as requested. The product under consideration is copper alloy strip that will be used to manufacture automotive electrical connectors. According to your s
The tariff classification of copper discs from Finland
The products to be imported are described as two high purity copper plate discs. Disc 1 has a purity of 99.999 percent with a diameter of 30.5 inches, a thickness of 0.750 inches (19.05 mm), and is machine finished on the face and sides. Di
The tariff classification of copper clad laminates from China.
The products to be imported are cut lengths of copper clad laminate consisting of two layers of 99.8% pure copper foil with a prepreg, glass fabric and plastic resin, bonding sheet sandwiched in between. Available in a variety of widths wit
The tariff classification of copper clad laminates from China.
The products to be imported are cut lengths of copper clad laminate consisting of two layers of 99.8% pure copper foil with a prepreg, glass fabric and plastic resin, bonding sheet sandwiched in between. Available in a variety of widths wit
The tariff classification of electrodeposited refined copper foils from Luxembourg.
The items to be imported consist of refined copper foils that are composed of 99.95% copper. These foils have been electroplated with a copper/zinc layer. The foils will vary in thickness from .009 mm to .400 mm and in width from 305 mm (12
The tariff classification of copper T-bars and flat strips from Germany.
, KG, Germany. The samples are being returned as you have requested. You have described your items as copper T-bars and flat strips, further noting the following: Item F 4467-FZ is a flat strip (grooved strip). Item F 4447-FZ is a flat stri
The tariff classification of metal coils from Germany
, Charlotte, NC. You have described your samples as follows: PW 100 - Monel (nickel and copper alloy-cold rolled), color grey, coil dimensions: 1.3 mm x 75 mm x 100 m, composed of: nickel 66.5%, carbon 0.15%, manganese 1%, iron 1.25%, sulph
The tariff classification of perforated metal sheet and strip from Italy.
Descriptive literature was submitted with your request. The products to be imported are perforated metal products in sheet and coil form. The perforated metal materials are cold-rolled and galvanized nonalloy steel, stainless steel, aluminu
The tariff classification of doctor blade material from Italy.
Descriptive literature was submitted with your ruling request. The products to be imported are described as doctor blades used in a paper machine for the manufacture of paper or paperboard (doctoring). The doctor blades will be made of Type
Other codes in heading 7409
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7409.21.00 from each major US trading partner.
Follow 7409.21.00
Get an email when a new CBP ruling cites this code, a ruling on it is revoked, or its tariff measures change.
One email per day at most. Confirm your address once, unsubscribe anytime.
Need to defend this classification?
Get the full 10-digit classification with GRI reasoning for your product, backed by cited CBP rulings and an audit trail for reasonable care.