7409.31.90.00
Of a width of less than 500 mm
Copper plates, sheets and strip, of a thickness exceeding 0.15 mm: Of copper-tin base alloys (bronze): In coils: Of a thickness of less than 5 mm
Duty rates
Column 1 (General / MFN)
3%
Column 2 (Non-NTR)
49%
Column 1 (Special / FTA)
Free
Eligible
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.82.01
No change
Articles provided for in subdivision (c) of U.S. note 16 to this subchapter that do not contain any aluminum, steel, or copper
Effective from April 6, 2026
9903.82.02
The duty provided in the applicable subheading + 50%
Except as provided for in headings 9903.82.14, 9903.85.67 and 9903.85.68, articles of aluminum, of steel or of copper and derivative aluminum or steel articles, as provided for in subdivisions (c)(i)–(v) of U.S. note 16 to this subchapter
Effective from April 6, 2026
9903.82.14
The duty provided in the applicable subheading + 50%
Articles of steel or of copper and derivative steel the product of the Russian Federation, as provided for in subdivisions (c)(iii)–(v) of U.S. note 16 to this subchapter
Applies to origin: RU
Effective from April 6, 2026
9903.88.03
LIST_1
The duty provided in the applicable subheading + 25%
Except as provided in headings 9903.88.13, 9903.88.18, 9903.88.33, 9903.88.34, 9903.88.35, 9903.88.36, 9903.88.37, 9903.88.38, 9903.88.40, 9903.88.41, 9903.88.43, 9903.88.45, 9903.88.46, 9903.88.48, 9903.88.56, 9903.88.64, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(e) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(f)
Applies to origin: CN
Effective from August 23, 2018
Related CBP rulings
Country of Origin and UKFTA Eligibility of the Posha Autonomous Cooking Appliance
Country of Origin and UKFTA Eligibility of the Posha Autonomous Cooking Appliance
The tariff classification and applicability of 9802.00.60 to cartridge cups, projectile cups, and cartridge strip manufactured from scrap gathered in the United States, processed in India, and returned to the United States for further processing
are modified in any way, or if the goods do not conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and Border Protection (CBP) and submit a request for a new ruling in accordance with 19 C.
The country of origin and status under the United States-Mexico-Canada Trade Agreement (USMCA) of copper alloy strip
Representative samples were included with your submission and will be returned to you as requested. The product under consideration is copper alloy strip that will be used to manufacture automotive electrical connectors. According to your s
The tariff classification of copper discs from Finland
The products to be imported are described as two high purity copper plate discs. Disc 1 has a purity of 99.999 percent with a diameter of 30.5 inches, a thickness of 0.750 inches (19.05 mm), and is machine finished on the face and sides. Di
The tariff classification of copper clad laminates from China.
The products to be imported are cut lengths of copper clad laminate consisting of two layers of 99.8% pure copper foil with a prepreg, glass fabric and plastic resin, bonding sheet sandwiched in between. Available in a variety of widths wit
The tariff classification of copper clad laminates from China.
The products to be imported are cut lengths of copper clad laminate consisting of two layers of 99.8% pure copper foil with a prepreg, glass fabric and plastic resin, bonding sheet sandwiched in between. Available in a variety of widths wit
The tariff classification of electrodeposited refined copper foils from Luxembourg.
The items to be imported consist of refined copper foils that are composed of 99.95% copper. These foils have been electroplated with a copper/zinc layer. The foils will vary in thickness from .009 mm to .400 mm and in width from 305 mm (12
The tariff classification of copper T-bars and flat strips from Germany.
, KG, Germany. The samples are being returned as you have requested. You have described your items as copper T-bars and flat strips, further noting the following: Item F 4467-FZ is a flat strip (grooved strip). Item F 4447-FZ is a flat stri
The tariff classification of metal coils from Germany
, Charlotte, NC. You have described your samples as follows: PW 100 - Monel (nickel and copper alloy-cold rolled), color grey, coil dimensions: 1.3 mm x 75 mm x 100 m, composed of: nickel 66.5%, carbon 0.15%, manganese 1%, iron 1.25%, sulph
The tariff classification of perforated metal sheet and strip from Italy.
Descriptive literature was submitted with your request. The products to be imported are perforated metal products in sheet and coil form. The perforated metal materials are cold-rolled and galvanized nonalloy steel, stainless steel, aluminu
The tariff classification of doctor blade material from Italy.
Descriptive literature was submitted with your ruling request. The products to be imported are described as doctor blades used in a paper machine for the manufacture of paper or paperboard (doctoring). The doctor blades will be made of Type
The tariff classification of extruded copper sheets from Russia.
The tariff classification of extruded copper sheets from Russia.
Other codes in heading 7409
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7409.31.90.00 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →