4 newer rulings cite the same tariff codes.

Classification can shift over time. Review the more recent rulings below before relying on this one.

N269120 N2 Ruling Active

The tariff classification of the Outside Handle & Switch Assembly-Tail Lid from Korea

Issued October 7, 2015 by U.S. Customs and Border Protection.

Cite this ruling

Copies to clipboard

N2 N269120 (October 7, 2015)

Tariff classification

HTS codes: 8536.50.9031

Headings: 8536

Product description

Sample is being returned. The merchandise under consideration is referred to as the “Outside Handle & Switch Assembly-Tail Lid.” This switch assembly consists of the push-button micro switch, the actuator with corresponding hardware, the assembly body, and the rubber cover. The switch assembly is intended to be mounted on the trunk of a motor vehicle for the purpose of releasing the lid latch. In use, a person would depress the rubber cover causing the actuator to momentarily depress the electrical contacts, which send an electrical signal to open the door latch.

CBP rationale

The applicable subheading for the Outside Handle & Switch Assembly-Tail Lid will be 8536.50.9031, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits…, for a voltage not exceeding 1000 V; …: Other switches: Other: Other: Push-button: Rated at not over 5 A: Momentary contact.

Full text

N269120 October 7, 2015 CLA-2-85:OT:RR:NC:N1:120 CATEGORY: Classification TARIFF NO.: 8536.50.9031 Young Bin Oh Hyundai Motor Company 231, Yangjae 2-dong Seocho-gu, Seoul Korea RE: The tariff classification of the Outside Handle & Switch Assembly-Tail Lid from Korea Dear Mr. Oh: In your letter dated September 16, 2015, you requested a tariff classification ruling. Sample is being returned. The merchandise under consideration is referred to as the “Outside Handle & Switch Assembly-Tail Lid.” This switch assembly consists of the push-button micro switch, the actuator with corresponding hardware, the assembly body, and the rubber cover. The switch assembly is intended to be mounted on the trunk of a motor vehicle for the purpose of releasing the lid latch. In use, a person would depress the rubber cover causing the actuator to momentarily depress the electrical contacts, which send an electrical signal to open the door latch. The applicable subheading for the Outside Handle & Switch Assembly-Tail Lid will be 8536.50.9031, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits…, for a voltage not exceeding 1000 V; …: Other switches: Other: Other: Push-button: Rated at not over 5 A: Momentary contact.” The rate of duty will be 2.7 percent ad valorem. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided on World Wide Web at http://www.usitc.gov/tata/hts/. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Karl Moosbrugger at [email protected]. Sincerely, Gwenn Klein Kirschner Director National Commodity Specialist Division

View original on CBP CROSS →

More rulings on the same tariff codes

Follow N269120

Get an email if this ruling is revoked or modified, or a newer ruling supersedes it.

One email per day at most. Confirm your address once, unsubscribe anytime.

Searching CBP rulings the smart way

Rulings are precedent. See which ones apply to your product: TariffLens semantically searches all 200,000+ CBP rulings and builds defensible classifications backed by ruling citations.