The tariff classification of steel tubing from Germany
Issued May 8, 2015 by U.S. Customs and Border Protection.
Tariff classification
HTS codes: 7304.31.6050
Headings: 7304
Product description
A representative sample was included with your submission and will be returned to you. The product under consideration is described as hollow steel tubing used to manufacture a drag link, a steering component used in off-highway construction equipment. This nonalloy seamless tubing measures 767 mm (approximately 30 inches) in length and has a diameter of 40 mm and a wall thickness of 5.7 mm. You indicate that the tubing is manufactured from bar that has been bored through its center. The tubing is then cold-drawn, heat treated, straightened, cut and bundled prior to importation. You suggest classification of the steel tubing in subheading 7304.29.5015, Harmonized Tariff Schedule of the United States (HTSUS), which provides for tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel, casing, tubing and drill pipe, of a kind used in drilling for oil or gas, other, tubing, of iron or nonalloy steel having an outside diameter not exceeding 114.3 mm, having a wall thickness not exceeding 9.5 mm. However, the subject tubing is not of a kind used in drilling for oil or gas and is more specifically provided for in subheading 7304.31, HTSUS.
CBP rationale
The applicable subheading for the steel tubing will be 7304.31.6050, HTSUS, which provides for tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel, other, of circular cross section, of iron or nonalloy steel, cold-drawn or cold-rolled (cold-reduced), other, other.
Full text
N264043 May 8, 2015 CLA-2-73:OT:RR:NC:N1:117 CATEGORY: Classification TARIFF NO.: 7304.31.6050 Mr. Zach Parsons ZF North America, Inc. 15811 Centennial Drive Northville, MI 48168 RE: The tariff classification of steel tubing from Germany Dear Mr. Parsons: In your letter dated March 24, 2015 you requested a tariff classification ruling. A representative sample was included with your submission and will be returned to you. The product under consideration is described as hollow steel tubing used to manufacture a drag link, a steering component used in off-highway construction equipment. This nonalloy seamless tubing measures 767 mm (approximately 30 inches) in length and has a diameter of 40 mm and a wall thickness of 5.7 mm. You indicate that the tubing is manufactured from bar that has been bored through its center. The tubing is then cold-drawn, heat treated, straightened, cut and bundled prior to importation. You suggest classification of the steel tubing in subheading 7304.29.5015, Harmonized Tariff Schedule of the United States (HTSUS), which provides for tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel, casing, tubing and drill pipe, of a kind used in drilling for oil or gas, other, tubing, of iron or nonalloy steel having an outside diameter not exceeding 114.3 mm, having a wall thickness not exceeding 9.5 mm. However, the subject tubing is not of a kind used in drilling for oil or gas and is more specifically provided for in subheading 7304.31, HTSUS. The applicable subheading for the steel tubing will be 7304.31.6050, HTSUS, which provides for tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel, other, of circular cross section, of iron or nonalloy steel, cold-drawn or cold-rolled (cold-reduced), other, other. The rate of duty will be free. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided on World Wide Web at http://www.usitc.gov/tata/hts/. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Mary Ellen Laker at [email protected]. Sincerely, Gwenn Klein Kirschner Director National Commodity Specialist Division
More rulings on the same tariff codes
The tariff classification of steel mechanical tubing from Japan
The tariff classification and country of origin marking of steel torsion shafts from China.
The tariff classification of steel tubes from China.
The tariff classification of seamless steel tubes from China
The tariff classification of mechanical tubing from China
The tariff classification of galvanized steel pipe from Japan.
The tariff classification of steel and rubber pipes, fittings, hoses and gaskets from Italy.
The tariff classification of steel tubes from the Dominican Republic.
The tariff classification of steel tubes from the Dominican Republic.
The tariff classification of steel tubes from the Dominican Republic.
Searching CBP rulings the smart way
TariffLens semantically searches all 200,000+ CBP rulings, surfaces the ones that actually match your product, and builds defensible classifications backed by ruling citations.
Book a demo →