8 newer rulings cite the same tariff codes.

Classification can shift over time. Review the more recent rulings below before relying on this one.

E86977 E8 Ruling Active

The tariff classification of steel tubes from the Dominican Republic.

Issued September 30, 1999 by U.S. Customs and Border Protection.

Cite this ruling

Copies to clipboard

E8 E86977 (September 30, 1999)

Tariff classification

HTS codes: 7304.31.6050

Headings: 7304

Product description

The products to be imported are Grade 1018 nonalloy steel seamless cold-rolled tubes measuring approximately 3 ½ inches in length. The tubes have an outside diameter of ¾ inch and a wall thickness of 0.0625 inch. These tubes, which are produced in the United States, are sent to the Dominican Republic in 12-ft. lengths. They are cut to length in the Dominican Republic and then imported into the United States where they will be used as components in safety dummies.

CBP rationale

The applicable subheading for the cold-rolled nonalloy steel seamless tubes will be 7304.31.6050, Harmonized Tariff Schedule of the United States (HTS), which provides for tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel, other, of circular cross section, of iron or nonalloy steel, cold-drawn or cold-rolled (cold-reduced), other, other.

Full text

NY E86977 September 30, 1999 CLA-2-73:RR:NC:1:117 E86977 CATEGORY: Classification TARIFF NO.: 7304.31.6050 Mr. Stephen P. Deem Control Devices, Inc. 228 Northeast Road Standish, Maine 04084-6149 RE: The tariff classification of steel tubes from the Dominican Republic. Dear Mr. Deem: In your letter dated August 25, 1999, you requested a tariff classification ruling. A representative sample of the product to be imported was submitted with your request. The products to be imported are Grade 1018 nonalloy steel seamless cold-rolled tubes measuring approximately 3 ½ inches in length. The tubes have an outside diameter of ¾ inch and a wall thickness of 0.0625 inch. These tubes, which are produced in the United States, are sent to the Dominican Republic in 12-ft. lengths. They are cut to length in the Dominican Republic and then imported into the United States where they will be used as components in safety dummies. The applicable subheading for the cold-rolled nonalloy steel seamless tubes will be 7304.31.6050, Harmonized Tariff Schedule of the United States (HTS), which provides for tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel, other, of circular cross section, of iron or nonalloy steel, cold-drawn or cold-rolled (cold-reduced), other, other. The rate of duty will be 4 percent ad valorem. Articles classifiable under subheading 7304.31.6050, HTS, which are products of the Dominican Republic, are entitled to duty free treatment under the Caribbean Basin Economic Recovery Act (CBERA) upon compliance with all applicable regulations. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Paula Ilardi at 212-637-7016. Sincerely, Robert B. Swierupski Director, National Commodity Specialist Division

View original on CBP CROSS →

More rulings on the same tariff codes

Follow E86977

Get an email if this ruling is revoked or modified, or a newer ruling supersedes it.

One email per day at most. Confirm your address once, unsubscribe anytime.

Searching CBP rulings the smart way

Rulings are precedent. See which ones apply to your product: TariffLens semantically searches all 200,000+ CBP rulings and builds defensible classifications backed by ruling citations.