10 newer rulings cite the same tariff codes.
Classification can shift over time. Review the more recent rulings below before relying on this one.
The tariff classification of a Printed Circuit Board/wire Harness Module from India
Issued November 4, 2013 by U.S. Customs and Border Protection.
Cite this ruling
Copies to clipboardN2 N246701 (November 4, 2013)
Tariff classification
HTS codes: 8537.10.9070
Headings: 8537
Product description
The Printed Circuit Board (PCB)/wire Harness Module is comprised of a printed circuit board enclosed in a zinc housing with a connector and a wire harness attached. The housing measures approximately 3 inches tall by 2 3/4 inches wide by1 inch deep. The wire harness measures approximately 36 inches long. The PCB contains several circuit blocks, which consist of various components such as, Mos-Fets (electronic switches), resistors, capacitors and voltage regulators and other active components. It is stated that the PCB/wire harness module will be used as a power source for an automobile Soot Sensor that will be manufactured in the Ohio facility.
CBP rationale
The applicable subheading for the Printed Circuit Board/wire Harness Module will be 8537.10.9070, Harmonized Tariff Schedule of the United States (HTSUS), which provides for "Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of 8535 or 8536, for electric control or the distribution of electricity…: For a voltage not exceeding 1,000 V: Other: Other: Other.
Full text
N246701 November 4, 2013 CLA-2-85:OT:RR:NC:N1:110 CATEGORY: Classification TARIFF NO.: 8537.10.9070 Ms. Paula M. Connelly, Esq. 67 South Bedford St. Suite 400 West Burlington, MA 01803 RE: The tariff classification of a Printed Circuit Board/wire Harness Module from India Dear Ms. Connelly: In your letter dated September 24, 2013, on behalf of your client Control Devices a division of Stoneridge, Inc., you requested a tariff classification ruling. A sample was submitted with your letter and will be returned to you. The Printed Circuit Board (PCB)/wire Harness Module is comprised of a printed circuit board enclosed in a zinc housing with a connector and a wire harness attached. The housing measures approximately 3 inches tall by 2 3/4 inches wide by1 inch deep. The wire harness measures approximately 36 inches long. The PCB contains several circuit blocks, which consist of various components such as, Mos-Fets (electronic switches), resistors, capacitors and voltage regulators and other active components. It is stated that the PCB/wire harness module will be used as a power source for an automobile Soot Sensor that will be manufactured in the Ohio facility. The applicable subheading for the Printed Circuit Board/wire Harness Module will be 8537.10.9070, Harmonized Tariff Schedule of the United States (HTSUS), which provides for "Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of 8535 or 8536, for electric control or the distribution of electricity…: For a voltage not exceeding 1,000 V: Other: Other: Other." The general rate of duty will be 2.7 percent ad valorem. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided on World Wide Web at http://www.usitc.gov/tata/hts/. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Hope Abada at (646) 733-3016. Sincerely, Gwenn Klein Kirschner Acting Director National Commodity Specialist Division
More rulings on the same tariff codes
The tariff classification of LED retrofit lamp and PCBA from Canada
The tariff classification of the SmartPower Outlet from Mexico
The tariff classification of conveyor protection switches from China and Italy.
The tariff classification of a surge protector from China
The tariff classification of an electrical controller
The tariff classification of an electrical protection device from South Korea.
The tariff classification of the Drive Box Injector from Korea.
The tariff classification of an electrical cabinet from Spain
The tariff classification of water irrigation components from an unspecified country of origin
The tariff classification of motor starters from New Zealand and Denmark
Follow N246701
Get an email if this ruling is revoked or modified, or a newer ruling supersedes it.
One email per day at most. Confirm your address once, unsubscribe anytime.
Searching CBP rulings the smart way
Rulings are precedent. See which ones apply to your product: TariffLens semantically searches all 200,000+ CBP rulings and builds defensible classifications backed by ruling citations.