4 newer rulings cite the same tariff codes.
Classification can shift over time. Review the more recent rulings below before relying on this one.
The tariff classification of a bladder injection needle from France.
Issued April 3, 2009 by U.S. Customs and Border Protection.
Cite this ruling
Copies to clipboardN0 N054164 (April 3, 2009)
Tariff classification
HTS codes: 9018.31.0090
Headings: 9018
Product description
You state: “The Bladder Injection Needle is a needle for intravesical injections, consisting of a length of thermoplastic tubing, a stainless-steel needle, a Luer connector, and a Tuohy Borst adapter. The Bladder Injection Needle comes in two forms; the Rigid Bladder Injection Needle is 35mm and the Flexible Bladder Injection Needle is 70mm. The needle is supplied capped with a blue needle protector sheath. Intended use for the Bladder Injection Needle is for injection of solutions into the human bladder wall.” Per the Instructions for Use page which you provided: “Connect the syringe used for the injection of the solution to the Luer connector at the proximal end of the device.” You propose classification in HTSUS 9018.31.0080. However, as we understand your information, the syringe is not part of the importation.
CBP rationale
The applicable subheading for the Bladder Injection Needle will be 9018.31.0090, Harmonized Tariff Schedule of the United States (HTSUS), which provides for parts and accessories of syringes.
Full text
N054164 April 3, 2009 CLA-2-90:OT:RR:E:NC:1:105 CATEGORY: Classification TARIFF NO.: 9018.31.0090 Ms. Freya Steinmeyer Wilkes Allergan Inc. 2525 Dupont Drive Irvine, CA 92612 RE: The tariff classification of a bladder injection needle from France. Dear Ms. Wilkes: In your letter dated March 10, 2009, you requested a tariff classification ruling. No sample was provided. You state: “The Bladder Injection Needle is a needle for intravesical injections, consisting of a length of thermoplastic tubing, a stainless-steel needle, a Luer connector, and a Tuohy Borst adapter. The Bladder Injection Needle comes in two forms; the Rigid Bladder Injection Needle is 35mm and the Flexible Bladder Injection Needle is 70mm. The needle is supplied capped with a blue needle protector sheath. Intended use for the Bladder Injection Needle is for injection of solutions into the human bladder wall.” Per the Instructions for Use page which you provided: “Connect the syringe used for the injection of the solution to the Luer connector at the proximal end of the device.” You propose classification in HTSUS 9018.31.0080. However, as we understand your information, the syringe is not part of the importation. The applicable subheading for the Bladder Injection Needle will be 9018.31.0090, Harmonized Tariff Schedule of the United States (HTSUS), which provides for parts and accessories of syringes. The rate of duty will be Free. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided on World Wide Web at http://www.usitc.gov/tata/hts/. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist J. Sheridan at 646-733-3012. Sincerely, Robert B. Swierupski Director National Commodity Specialist Division
More rulings on the same tariff codes
The tariff classification of “DoseMate DL,” “Feeding Tube Hub Cleaning Tool,” and “Fill Cap Coupler” from China
The tariff classification of five syringe accessories from China
The tariff classification of sub-assemblies of an auto-injector from United Kingdom
The tariff classification of glass syringe barrels from Portugal.
The tariff classification of a Peg Intron Redipen Lower Body Assembly from China or Singapore
The tariff classification of Biodome Injection Caps from
The tariff classification and country of origin marking of LUPRON DEPOT 7.5 mg (leuprolide acetate for depot suspension) prefilled dual-chamber syringe; and the tariff classification of plastic plungers for syringes from Japan
The tariff classification of artificial insemination equipment from Germany
Follow N054164
Get an email if this ruling is revoked or modified, or a newer ruling supersedes it.
One email per day at most. Confirm your address once, unsubscribe anytime.
Searching CBP rulings the smart way
Rulings are precedent. See which ones apply to your product: TariffLens semantically searches all 200,000+ CBP rulings and builds defensible classifications backed by ruling citations.