The tariff classification of the MagBag camera support from China
Issued May 7, 2008 by U.S. Customs and Border Protection.
Tariff classification
HTS codes: 9006.91.0000
Headings: 9006
Product description
The camera support is identified as a MagBag. The MagBag is designed to support any digital, film or video camera with a standard ¼ inch – 20 tripod socket. The top and the side of the MagBag is made of 1000 denier cordura nylon with PU coating, the lining is made of 200 denier nylon with PU coating, and the straps are made of nylon webbing. The MagBag is designed to be filled with material such as plastic pellets, stone or rock for placement on uneven surfaces where a typical tripod would become unstable. A magnetic adapter is built in the bag and a magnetic adapter is placed in the tripod socket of the camera. When the MagBag and the camera adapter are connected, the camera is ready to be placed on an uneven surface to capture an image.
CBP rationale
The applicable subheading for the camera support will be 9006.91.0000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for parts and accessories for photographic (other than cinematographic) cameras.
Full text
N027037 May 7, 2008 CLA-2-90:OT:RR:NC:1:114 CATEGORY: Classification TARIFF NO.: 9006.91.0000 Mr. Sam Shinoda ToCAD America, Inc. 53 Green Pond Road Suite 5 Rockaway, NJ 07866 RE: The tariff classification of the MagBag camera support from China Dear Mr. Shinoda: In your letter dated April 25, 2008, you requested a tariff classification ruling. A sample of the MagBag camera support was submitted with the ruling request. The camera support is identified as a MagBag. The MagBag is designed to support any digital, film or video camera with a standard ¼ inch – 20 tripod socket. The top and the side of the MagBag is made of 1000 denier cordura nylon with PU coating, the lining is made of 200 denier nylon with PU coating, and the straps are made of nylon webbing. The MagBag is designed to be filled with material such as plastic pellets, stone or rock for placement on uneven surfaces where a typical tripod would become unstable. A magnetic adapter is built in the bag and a magnetic adapter is placed in the tripod socket of the camera. When the MagBag and the camera adapter are connected, the camera is ready to be placed on an uneven surface to capture an image. The applicable subheading for the camera support will be 9006.91.0000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for parts and accessories for photographic (other than cinematographic) cameras. The rate of duty will be 5.8 percent ad valorem. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided on World Wide Web at http://www.usitc.gov/tata/hts/. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Barbara Kiefer at 646-733-3019. Sincerely, Robert B. Swierupski Director, National Commodity Specialist Division
More rulings on the same tariff codes
The tariff classification of Digital Flexi Pod from China.
The tariff classification of a Two-Wheeled Trolley, a Camera Rain Cover, Shoulder Straps, and “Modi-vers” - polyethylene foam boards from China
The tariff classification of flash charger assemblies from Malaysia, China and Indonesia
The tariff classification of 110 film for color prints, sunglasses, camera, hand-held shutter release consisting of tubing attached to a squeeze bulb, and viewfinder from China
The tariff classification of printed circuit board assemblies from Mexico
The tariff classification of Chronograph Parts and Accessories from Hong Kong
The tariff classification of a golf shoe bag, camera strap and a travel pouch from China and/or Philippines.
The tariff classification of Camera Straps from China
The tariff classification of a binocular/camera neck strap from Taiwan.
The tariff classification of a camera strap-belt from China or Taiwan
Searching CBP rulings the smart way
TariffLens semantically searches all 200,000+ CBP rulings, surfaces the ones that actually match your product, and builds defensible classifications backed by ruling citations.
Book a demo →