THE COUNTRY OF ORIGIN MARKING OF BALL POINT PENS

NY J83767 April 25, 2003 MAR-2 RR:NC:2:224 J83767 CATEGORY: MARKING Mr. Paul Becker The Becker Company 200 Lansdowne Westport, CT 06880 RE: THE COUNTRY OF ORIGIN MARKING OF BALL POINT PENS Dear Mr. Becker: This is in response to your letter dated April 22, 2003 requesting a ruling on whether the proposed marking is an acceptable country of origin marking for the imported ball point pens. A marked sample was submitted with your letter for review. The proposed marking shown on the paper label glued onto the inside of the case would only be acceptable if the imported ball point pens are packaged and sold in the cases that are fitted to hold the pens. Otherwise, the country of origin should be die sunk, molded in, or etched on the metal portion of the ball point pen. The marking statute, section 304, Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that, unless excepted, every article of foreign origin (or its container) imported into the U.S. shall be marked in a conspicuous place as legibly, indelibly and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the U.S. the English name of the country of origin of the article. As provided in section 134.41(b), Customs Regulations (19 CFR 134.41(b)), the country of origin marking is considered conspicuous if the ultimate purchaser in the U.S. is able to find the marking easily and read it without strain. With regard to the permanency of a marking, section 134.41(a), Customs Regulations (19 CFR 134.41(a)), provides that as a general rule marking requirements are best met by marking worked into the article at the time of manufacture. For example, it is suggested that the country of origin on metal articles be die sunk, molded in, or etched. However, section 134.44, Customs Regulations (19 CFR 134.44), generally provides that any marking that is sufficiently permanent so that it will remain on the article until it reaches the ultimate purchaser unless deliberately removed is acceptable. The proposed marking of the imported ball point pens, as described above, is conspicuously, legibly and permanently marked in satisfaction of the marking requirements of 19 U.S.C. 1304 and 19 CFR Part 134 and is an acceptable country of origin marking for the imported merchandise. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 CFR Part 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Tom McKenna at 646-733-3025. Sincerely, Robert B. Swierupski Director, National Commodity Specialist Division