The tariff classification of a modular washer from Canada.
Issued December 16, 1999 by U.S. Customs and Border Protection.
Tariff classification
HTS codes: 8424.89.7090
Headings: 8424
Product description
You submitted literature with your request. The article in question is a modular system washer identified as the Cata-Dyne Washer. This washer is a pretreatment system that removes contaminants, reduces chemical consumption and minimizes waste products. It operates as a power washer, used to clean and prepare parts for powder coating or wet coating. Located at the beginning of a conveyorized line of a basic finishing system, this power washer utilizes a spraying system with a lower holding tank for solutions comprised of water or a mixture of chemicals and water. These tanks are heated utilizing an air/fuel burner system heating up a burner tube assembly inside the tank. An upper structure houses the actual spray system with a drain area between spray zones. The power washer utilizes a vertically mounted pump which moves the solution held in the tank through double stainless steel screens. The solution flows to the manifolds and on to the connected risers. It then passes through the nozzles connected to the risers and sprays the parts passing through the washer. Gravity forces the solution back to the lower tank and the process begins again.
CBP rationale
tank for solutions comprised of water or a mixture of chemicals and water. These tanks are heated utilizing an air/fuel burner system heating up a burner tube assembly inside the tank. An upper structure houses the actual spray system with a drain area between spray zones. The power washer utilizes a vertically mounted pump which moves the solution held in the tank through double stainless steel screens. The solution flows to the manifolds and on to the connected risers. It then passes through the nozzles connected to the risers and sprays the parts passing through the washer. Gravity forces the solution back to the lower tank and the process begins again. The applicable subheading for the modular washer will be 8424.89.7090, Harmonized Tariff Schedule of the United States (HTS), which provides for other mechanical appliances for projecting, dispersing or spraying liquids or powders. The general rate of duty will be 1.8 percent ad valorem.
Full text
NY F80604 December 16, 1999 CLA-2-84:RR:NC:MM:106 F80604 CATEGORY: Classification TARIFF NO.: 8424.89.7090 Ms. Judy Campbell W.Y. Moberly, Inc. Box 164 Sweetgrass, Montana 59484 RE: The tariff classification of a modular washer from Canada. Dear Ms. Campbell: In your letter dated November 25, 1999, on behalf of Ciscan Industries Ltd, you requested a tariff classification ruling. You submitted literature with your request. The article in question is a modular system washer identified as the Cata-Dyne Washer. This washer is a pretreatment system that removes contaminants, reduces chemical consumption and minimizes waste products. It operates as a power washer, used to clean and prepare parts for powder coating or wet coating. Located at the beginning of a conveyorized line of a basic finishing system, this power washer utilizes a spraying system with a lower holding tank for solutions comprised of water or a mixture of chemicals and water. These tanks are heated utilizing an air/fuel burner system heating up a burner tube assembly inside the tank. An upper structure houses the actual spray system with a drain area between spray zones. The power washer utilizes a vertically mounted pump which moves the solution held in the tank through double stainless steel screens. The solution flows to the manifolds and on to the connected risers. It then passes through the nozzles connected to the risers and sprays the parts passing through the washer. Gravity forces the solution back to the lower tank and the process begins again. The applicable subheading for the modular washer will be 8424.89.7090, Harmonized Tariff Schedule of the United States (HTS), which provides for other mechanical appliances for projecting, dispersing or spraying liquids or powders. The general rate of duty will be 1.8 percent ad valorem. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Patrick J. Wholey at 212-637-7036. Sincerely, Robert B. Swierupski Director, National Commodity Specialist Division
More rulings on the same tariff codes
The tariff classification of a trigger sprayer and a liquid soap dispenser from China
The tariff classification of a 3-piece personal hygiene dispenser set from China
The tariff classification carrying case and accessories
The tariff classification of a lotion dispenser from China.
The tariff classification of fluid delivery systems
The tariff classification of a lotion dispenser from China.
The tariff classification of a shower curtain and bathroom accessories from China.
The tariff classification of a manicure kit and a pedicure kit from China
The tariff classification of a porcelain toothbrush holder and a porcelain lotion dispenser with an alloy pump from ChinaDear Ms. Davidson:
The tariff classification of an automotive windshield washer reservoir assembly.
Searching CBP rulings the smart way
TariffLens semantically searches all 200,000+ CBP rulings, surfaces the ones that actually match your product, and builds defensible classifications backed by ruling citations.
Book a demo →