7219.32.00.35
Of high-nickel alloy steel
Flat-rolled products of stainless steel, of a width of 600 mm or more: Not further worked than cold-rolled (cold-reduced): Of a thickness of 3 mm or more but less than 4.75 mm: In coils: Other
Data provenance: Rates from HTS Revision 16 (Aug 15, 2026); trade measures verified against CBP CSMS and Federal Register notices through Aug 15, 2026.
Duty rates
No active duty rates published for this code.
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
No active Chapter 99 measures are linked to this code.
Rate-change history
What the rate was before, and when it changed. The government schedule replaces each revision in place; we keep the timeline.
-
SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals
Section 232 steel scope expanded: 523 HTS codes added under combined-metals framework
See the change → -
NEW_PROGRAM Proclamation April 2, 2026 - Combined Metals
Combined Section 232 metals framework introduced — 16 new Chapter 99 codes (9903.82.02–17)
See the change → -
NEW_PROGRAM Executive Order Feb 1, 2026 — Reciprocal Tariff (FR 2026-03824)
Section 122 reciprocal surcharge in effect — additional 10% on most imports through July 24, 2026
See the change →
Related CBP rulings
The tariff classification of stainless steel unfinished die segments from Austria
The products under consideration are M390 stainless steel, unfinished die segments. Made from flat-rolled steel sheets, the circular segments measure 160 mm in thickness, 195-215 mm in width, and 470-540 mm in length. The die segments will
Country of Origin and USMCA Eligibility of the ecoCUBE Air Purification Device
The good at issue is the ecoCUBE air purification device for large combustion engines. Like a catalytic converter in a vehicle, the ecoCUBE is designed to meet emissions standards for large internal combustion engines in industrial applicat
The country of origin of cold-rolled stainless steel sheet
The product to be imported is a polished and coated Grade 430 stainless steel sheet. This cold-rolled, cut-to-length sheet measures 0.9 mm in thickness, 1219 mm in width, and 3048 mm in length. A polyvinyl chloride (PVC) coating is applied
Protest No. 4601-22-131915; Classification of lamination press plates
The subject merchandise is described as a lamination press plate used in the manufacture of polyvinyl chloride (PVC) smart cards, credit cards, and similar items. In their condition as imported, the finished plates are ready for installatio
The tariff classification of stainless steel strip from Germany
The product under consideration is stainless steel strip in coil form. You indicate that this cold-rolled strip is made to ASTM A666, the Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and
The country of origin of stainless steel sheet
The product to be imported is polished and coated Grade 304 or 430 stainless steel sheet. This cold-rolled, cut-to-length sheet ranges in thickness from 0.018” (0.45 mm) to 0.135” (3.42 mm) and has a width up to 60” (1524 mm). The nickel co
The country of origin marking, status under the United States-Mexico-Canada Trade Agreement (USMCA), and applicability of Section 301 trade remedy for the Vortex Stainless Flex Liner Kit.
The product under consideration is identified as the Vortex Stainless Flex Liner Kit (VOLKI-635). According to your submission, the flex liner kit is “intended for use with heating appliances burning solid fuels (pellet, wood) vented throug
The country of origin of stainless steel sheet
The product to be imported is polished and coated Grade 304 or 430 stainless steel sheet. This cold-rolled, cut-to-length sheet ranges in thickness from 0.018” (0.45 mm) to 0.135” (3.42 mm) and has a width up to 60” (1524 mm). The nickel co
The tariff classification of stainless steel plate from South Africa
The product under consideration is Grade 309S stainless steel plate, which is hot-rolled, annealed, and pickled. The plate is made to ASTM A240/A240M-20a and measures 0.187 inch (4.7498 mm) in thickness x 60 inches (1524 mm) in width x 120
The tariff classification of stainless steel flat-rolled products from China, Ukraine or Slovenia
The products under consideration are 4 varieties of stainless steel flat-rolled goods which differ in size and chemistry. You indicate this merchandise is hot-rolled from ingots, and subsequently annealed, but will not undergo any further p
Modification of NY N301037; Classification of steel doctor blades in coils from Italy
The steel doctor blades in coils at issue were described as follows in NY N301037: The products under consideration are described as steel doctor blades intended to be used as parts for printing presses. The steel is imported in various che
The tariff classification of nickel alloy plate from Japan
The merchandise in question is described as SuperAlloy UNSN08120.
Other codes in heading 7219
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7219.32.00.35 from each major US trading partner.
Follow 7219.32.00.35
Get an email when a new CBP ruling cites this code, a ruling on it is revoked, or its tariff measures change.
One email per day at most. Confirm your address once, unsubscribe anytime.
Need to defend this classification?
Get the full 10-digit classification with GRI reasoning for your product, backed by cited CBP rulings and an audit trail for reasonable care.