HEADING 7219
Flat-rolled products of stainless steel, of a width of 600 mm or more:
Part of Chapter 72 — Iron and Steel, Section XV.
Subheadings and tariff lines
7219D01Not further worked than hot-rolled, in coils:
7219.11.00Of a thickness exceeding 10 mm
7219.11.00.30Of a width not exceeding 1575 mm
7219.11.00.60Of a width exceeding 1575 mm
7219.12.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.12.00.02Not annealed or not pickled
7219.12.00D02Other:
7219.12.00.06Of high-nickel alloy steel
7219.12.00.02D03Other:
7219.12.00.06D04Of a width of 1370 mm or more:
7219.12.00.06D05Of a thickness exceeding 6.8 mm:
7219.12.00.21Of a width not exceeding 1575 mm
7219.12.00.26Of a width exceeding 1575 mm
7219.12.00.06D06Other:
7219.12.00.51Of a width not exceeding 1575 mm
7219.12.00.56Of a width exceeding 1575 mm
7219.12.00.06D07Other:
7219.12.00.06D08Containing more than 0.5 percent by weight of nickel:
7219.12.00.66Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7219.12.00.71Other
7219.12.00.81Other
7219.13.00Of a thickness of 3 mm or more but less than 4.75 mm
7219.13.00.02Not annealed or not pickled
7219.13.00D09Other:
7219.13.00.31Of a width of 1370 mm or more
7219.13.00.02D10Other:
7219.13.00.31D11Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7219.13.00.51Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7219.13.00.71Other
7219.13.00.81Other
7219.14.00Of a thickness of less than 3 mm
7219.14.00.30Of a width of 1370 mm or more
7219.14.00D12Other:
7219.14.00.65Of high-nickel alloy steel
7219.14.00.90Other
7219D13Not further worked than hot-rolled, not in coils:
7219.21.00Of a thickness exceeding 10 mm
7219.21.00.05Of high-nickel alloy steel
7219.21.00D14Other:
7219.21.00.20Of a width not exceeding 1575 mm
7219.21.00.40Of a width exceeding 1575 mm but not exceeding 1880 mm
7219.21.00.60Of a width exceeding 1880 mm
7219.22.00Of a thickness of 4.75 mm or more but not exceeding 10 mm
7219.22.00.05Of high-nickel alloy steel
7219.22.00D15Other:
7219.22.00.05D16Containing more than 0.5 percent by weight of nickel:
7219.22.00.05D17Containing more than 1.5 percent but less than 5 percent by weight of molybdenum:
7219.22.00.15Of a width not exceeding 1575 mm
7219.22.00.20Of a width exceeding 1575 mm but not exceeding 1880 mm
7219.22.00.25Of a width exceeding 1880 mm
7219.22.00.05D18Other:
7219.22.00.35Of a width not exceeding 1575 mm
7219.22.00.40Of a width exceeding 1575 mm but not exceeding 1880 mm
7219.22.00.45Of a width exceeding 1880 mm
7219.22.00.05D19Other:
7219.22.00.70Of a width not exceeding 1575 mm
7219.22.00.75Of a width exceeding 1575 mm but not exceeding 1880 mm
7219.22.00.80Of a width exceeding 1880 mm
7219.23.00Of a thickness of 3 mm or more but less than 4.75 mm
7219.23.00.30Of a width of 1370 mm or more
7219.23.00.60Other
7219.24.00Of a thickness of less than 3 mm
7219.24.00.30Of a width of 1370 mm or more
7219.24.00.60Other
7219D20Not further worked than cold-rolled (cold-reduced):
7219.31.00Of a thickness of 4.75 mm or more
7219.31.00.10In coils
7219.31.00.50Not in coils
7219.32.00Of a thickness of 3 mm or more but less than 4.75 mm
7219.32.00D21In coils:
7219.32.00D22Of a width of 1370 mm or more:
7219.32.00.05Of high-nickel alloy steel
7219.32.00D23Other:
7219.32.00.20Containing more than 0.5 percent by weight of nickel
7219.32.00.25Other
7219.32.00D24Other:
7219.32.00.35Of high-nickel alloy steel
7219.32.00D25Other:
7219.32.00.35D26Containing more than 0.5 percent by weight of nickel:
7219.32.00.36Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7219.32.00.38Other
7219.32.00.35D27Other:
7219.32.00.42Containing less than 15 percent by weight of chromium
7219.32.00.44Other
7219.32.00D28Not in coils:
7219.32.00.45Of a width of 1370 mm or more
7219.32.00.60Other
7219.33.00Of a thickness exceeding 1 mm but less than 3 mm
7219.33.00D29In coils:
7219.33.00D30Of a width of 1370 mm or more:
7219.33.00.05Of high-nickel alloy steel
7219.33.00D31Other:
7219.33.00.20Containing more than 0.5 percent by weight of nickel
7219.33.00.25Other
7219.33.00D32Other:
7219.33.00.35Of high-nickel alloy steel
7219.33.00D33Other:
7219.33.00.35D34Containing more than 0.5 percent by weight of nickel:
7219.33.00.36Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7219.33.00.38Other
7219.33.00.35D35Other:
7219.33.00.42Containing less than 15 percent by weight of chromium
7219.33.00.44Other
7219.33.00D36Not in coils:
7219.33.00.45Of a width of 1370 mm or more
7219.33.00D37Other:
7219.33.00.70Containing more than 0.5 percent but less than 24 percent by weight of nickel
7219.33.00.80Other
7219.34.00Of a thickness of 0.5 mm or more but not exceeding 1 mm
7219.34.00D38In coils:
7219.34.00.05Of high-nickel alloy steel
7219.34.00D39Other:
7219.34.00.05D40Containing more than 0.5 percent by weight of nickel:
7219.34.00.20Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7219.34.00.25Other
7219.34.00.05D41Other:
7219.34.00.30Containing less than 15 percent by weight of chromium
7219.34.00.35Other
7219.34.00.50Not in coils
7219.35.00Of a thickness of less than 0.5 mm
7219.35.00D42In coils:
7219.35.00D43Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7219.35.00.05Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7219.35.00.15Other
7219.35.00D44Other:
7219.35.00.30Containing less than 15 percent by weight of chromium
7219.35.00.35Other
7219.35.00.50Not in coils
7219.90.00Other
7219.90.00.10Of high-nickel alloy steel
7219.90.00D45Other:
7219.90.00.10D46Containing more than 0.5 percent by weight of nickel:
7219.90.00.20Containing more than 1.5 percent but less than 5 percent by weight of molybdenum
7219.90.00.25Other
7219.90.00.10D47Other:
7219.90.00.60Containing less than 15 percent by weight of chromium
7219.90.00.80Other
Recent CBP rulings on heading 7219
N355186
November 5, 2025
The tariff classification of stainless steel unfinished die segments from Austria
H346628
August 15, 2025
Country of Origin and USMCA Eligibility of the ecoCUBE Air Purification Device
N350709
July 8, 2025
The country of origin of cold-rolled stainless steel sheet
H327731
June 9, 2025
Protest No. 4601-22-131915; Classification of lamination press plates
N338337
February 29, 2024
The tariff classification of stainless steel strip from Germany
N334299
August 22, 2023
The country of origin of stainless steel sheet
N334104
August 11, 2023
The country of origin marking, status under the United States-Mexico-Canada Trade Agreement (USMCA), and applicability of Section 301 trade remedy for the Vortex Stainless Flex Liner Kit.
N333889
July 20, 2023
The country of origin of stainless steel sheet
N332636
May 10, 2023
The tariff classification of stainless steel plate from South Africa
N315943
November 18, 2020
The tariff classification of stainless steel flat-rolled products from China, Ukraine or Slovenia
H303128
June 12, 2020
Modification of NY N301037; Classification of steel doctor blades in coils from Italy
N305985
September 23, 2019
The tariff classification of nickel alloy plate from Japan
Classifying products under 7219?
TariffLens picks the right 10-digit code with GRI reasoning and cited rulings.
Book a demo →