7219.21.00.20
Of a width not exceeding 1575 mm
Flat-rolled products of stainless steel, of a width of 600 mm or more: Not further worked than hot-rolled, not in coils: Of a thickness exceeding 10 mm: Other
Duty rates
No active duty rates published for this code.
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.82.01
No change
Articles provided for in subdivision (c) of U.S. note 16 to this subchapter that do not contain any aluminum, steel, or copper
Effective from April 6, 2026
9903.82.02
The duty provided in the applicable subheading + 50%
Except as provided for in headings 9903.82.14, 9903.85.67 and 9903.85.68, articles of aluminum, of steel or of copper and derivative aluminum or steel articles, as provided for in subdivisions (c)(i)–(v) of U.S. note 16 to this subchapter
Effective from April 6, 2026
9903.82.04
The duty provided in the applicable subheading + 25%
Articles of aluminum or of steel and derivative aluminum or steel articles the product of the United Kingdom, as provided for in subdivisions (c)(i)–(iv) and (d) of U.S. note 16 to this subchapter
Applies to origin: GB
Effective from April 6, 2026
9903.82.14
The duty provided in the applicable subheading + 50%
Articles of steel or of copper and derivative steel the product of the Russian Federation, as provided for in subdivisions (c)(iii)–(v) of U.S. note 16 to this subchapter
Applies to origin: RU
Effective from April 6, 2026
9903.91.01
The duty provided in the applicable subheading + 25%
Effective with respect to entries on or after September 27, 2024, articles the product of China, as provided for in subdivision (b) of U.S. note 31 to this subchapter
Applies to origin: CN
Effective from September 27, 2024
Related CBP rulings
The tariff classification of stainless steel unfinished die segments from Austria
The products under consideration are M390 stainless steel, unfinished die segments. Made from flat-rolled steel sheets, the circular segments measure 160 mm in thickness, 195-215 mm in width, and 470-540 mm in length. The die segments will
Country of Origin and USMCA Eligibility of the ecoCUBE Air Purification Device
The good at issue is the ecoCUBE air purification device for large combustion engines. Like a catalytic converter in a vehicle, the ecoCUBE is designed to meet emissions standards for large internal combustion engines in industrial applicat
The country of origin of cold-rolled stainless steel sheet
The product to be imported is a polished and coated Grade 430 stainless steel sheet. This cold-rolled, cut-to-length sheet measures 0.9 mm in thickness, 1219 mm in width, and 3048 mm in length. A polyvinyl chloride (PVC) coating is applied
Protest No. 4601-22-131915; Classification of lamination press plates
The subject merchandise is described as a lamination press plate used in the manufacture of polyvinyl chloride (PVC) smart cards, credit cards, and similar items. In their condition as imported, the finished plates are ready for installatio
The tariff classification of stainless steel strip from Germany
The product under consideration is stainless steel strip in coil form. You indicate that this cold-rolled strip is made to ASTM A666, the Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and
The country of origin of stainless steel sheet
The product to be imported is polished and coated Grade 304 or 430 stainless steel sheet. This cold-rolled, cut-to-length sheet ranges in thickness from 0.018” (0.45 mm) to 0.135” (3.42 mm) and has a width up to 60” (1524 mm). The nickel co
The country of origin marking, status under the United States-Mexico-Canada Trade Agreement (USMCA), and applicability of Section 301 trade remedy for the Vortex Stainless Flex Liner Kit.
The product under consideration is identified as the Vortex Stainless Flex Liner Kit (VOLKI-635). According to your submission, the flex liner kit is “intended for use with heating appliances burning solid fuels (pellet, wood) vented throug
The country of origin of stainless steel sheet
The product to be imported is polished and coated Grade 304 or 430 stainless steel sheet. This cold-rolled, cut-to-length sheet ranges in thickness from 0.018” (0.45 mm) to 0.135” (3.42 mm) and has a width up to 60” (1524 mm). The nickel co
The tariff classification of stainless steel plate from South Africa
The product under consideration is Grade 309S stainless steel plate, which is hot-rolled, annealed, and pickled. The plate is made to ASTM A240/A240M-20a and measures 0.187 inch (4.7498 mm) in thickness x 60 inches (1524 mm) in width x 120
The tariff classification of stainless steel flat-rolled products from China, Ukraine or Slovenia
The products under consideration are 4 varieties of stainless steel flat-rolled goods which differ in size and chemistry. You indicate this merchandise is hot-rolled from ingots, and subsequently annealed, but will not undergo any further p
Modification of NY N301037; Classification of steel doctor blades in coils from Italy
The steel doctor blades in coils at issue were described as follows in NY N301037: The products under consideration are described as steel doctor blades intended to be used as parts for printing presses. The steel is imported in various che
The tariff classification of nickel alloy plate from Japan
The merchandise in question is described as SuperAlloy UNSN08120.
Other codes in heading 7219
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7219.21.00.20 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →