7208.39.00
Of a thickness of less than 3 mm
Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: Other, in coils, not further worked than hot-rolled
Data provenance: Rates from HTS Revision 16 (Aug 15, 2026); trade measures verified against CBP CSMS and Federal Register notices through Aug 15, 2026.
Duty rates
Column 1 (General / MFN)
Free
Column 2 (Non-NTR)
20%
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.90.09
35%
ActiveArticles the product of the Russian Federation, as provided for in U.S. note 30(c) to this subchapter and as provided for in the subheadings enumerated in U.S. note 30(d) to this subchapter
Applies to origin: RU, BY
Effective from April 5, 2025
Rate-change history
What the rate was before, and when it changed. The government schedule replaces each revision in place; we keep the timeline.
-
SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals
Section 232 steel scope expanded: 523 HTS codes added under combined-metals framework
See the change → -
NEW_PROGRAM Proclamation April 2, 2026 - Combined Metals
Combined Section 232 metals framework introduced — 16 new Chapter 99 codes (9903.82.02–17)
See the change → -
NEW_PROGRAM Executive Order Feb 1, 2026 — Reciprocal Tariff (FR 2026-03824)
Section 122 reciprocal surcharge in effect — additional 10% on most imports through July 24, 2026
See the change → -
Base rate HTS 2023
Column 1 general rate set to Free.
Related CBP rulings
Temporary Importation under Bond; Steel Plates; United States-Mexico-Canada (USMCA); Antidumping and Countervailing Duties; Section 232 Duties
DMC Global imports steel plates from Germany. DMC Global states that at importation these steel plates are classified under subheadings 7208.51.0060, 7208.52.0000, or 7225.40.3050, of the HTSUS. DMC Global notes that these steel plates may
The tariff classification of steel sheet from Vietnam
The product under consideration is hot-rolled steel sheet made to ASTM A572/A572M, Grade 50. Imported in coil form, this sheeting is available in three sizes: 3.83 mm X 1360 mm, 4.25 mm X 1360 mm and 4.53 mm X 1360 mm.
The tariff classification of steel sheet from Vietnam
The product under consideration is hot-rolled steel sheet meeting EN 10025-2, Grade S275 Jr + Ar. Imported in coil form, this sheeting is available in three sizes: 3.81 mm X 1410 mm, 4.24 mm X 1524 mm and 4.52 mm X 1524 mm. As this material
The tariff classification of flat-rolled products from Luxembourg
The products you intend to import are described as Web Tailor Made (WTM) beams for use in construction of slender buildings. The WTM products are shown in submitted pictures to be the web of a W beam without the flanges rolled in a beam mil
The tariff classification of flat-rolled nonalloy steel in coils from Russia
The items under consideration are flat-rolled nonalloy steel in coils that has not been further worked other than hot-rolled. The products are described in two sizes. The first is a 2.84mm thick X coil, and the second is a 6.10 mm thick X c
The tariff classification of flat-rolled nonalloy steel in coils from Russia
The subject of your inquiry is flat-rolled iron or nonalloy steel in coils that has not been further worked than hot-rolled. The product is described in two sizes: first, 2.84 mm thick and 1524 mm wide: second, 6.10 mm thick and 1524 mm wid
Ruling Request; Classification of Hot Rolled Carbon Steel Coils
On November 1, 2011, you filed an amended request for a binding ruling concerning the classification of certain hot rolled carbon steel coils. This was an amendment to your original request, filed on September 2, 2011. The merchandise at
Application for Further Review; Protest No. 2809-06-100091 19 U.S.C. §1313(j)(2)
Application for Further Review; Protest No. 2809-06-100091 19 U.S.C. §1313(j)(2)
The tariff classification of steel coils from India or China.
The items to be imported consist of hot rolled, non-alloy steel sheets imported in coils. The coils will measure between 1500 and 1650 mm in width. Imported in thicknesses of 9.1 mm, 10.9 mm, 12.7 mm and 13.1 mm, these steel sheets will not
The tariff classification of non-alloy steel coil from South Korea.
The item you plan to import is described as a flat-rolled product in coil form used for automotive body and chassis. This hot-rolled, non-alloy steel coil has been pickled and oiled. It measures 3.4 mm in thickness, 1524 mm in width and has
The tariff classification of steel plate from various countries.
All of the products to be imported are hot-rolled plates meeting ASTM A36, the standard specification for carbon structural steel. Some of the plates are rectangular in shape with varying sizes of either ½ “ to 6” in thickness and 96” in wi
The tariff classification of steel circles from Germany.
The products to be imported are steel circles that have been torch cut from hot-rolled rectangular nonalloy steel plate. After the circles are flame-cut from the plate, their faces are then subjected to a grinding process. The circles are a
Other codes in heading 7208
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7208.39.00 from each major US trading partner.
Follow 7208.39.00
Get an email when a new CBP ruling cites this code, a ruling on it is revoked, or its tariff measures change.
One email per day at most. Confirm your address once, unsubscribe anytime.
Need to defend this classification?
Get the full 10-digit classification with GRI reasoning for your product, backed by cited CBP rulings and an audit trail for reasonable care.