6909.19.50
Other
Ceramic wares for laboratory, chemical or other technical uses; ceramic troughs, tubs and similar receptacles of a kind used in agriculture; ceramic pots, jars and similar articles of a kind used for the conveyance or packing of goods: Ceramic wares for laboratory, chemical or other technical uses: Other
Duty rates
Column 1 (General / MFN)
4%
Column 2 (Non-NTR)
45%
Column 1 (Special / FTA)
Free
Eligible
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.88.03
LIST_1
The duty provided in the applicable subheading + 25%
Except as provided in headings 9903.88.13, 9903.88.18, 9903.88.33, 9903.88.34, 9903.88.35, 9903.88.36, 9903.88.37, 9903.88.38, 9903.88.40, 9903.88.41, 9903.88.43, 9903.88.45, 9903.88.46, 9903.88.48, 9903.88.56, 9903.88.64, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(e) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(f)
Applies to origin: CN
Effective from August 23, 2018
Related CBP rulings
The tariff classification of ceramic balls from South Korea.
This analysis has been completed. The ceramic balls measure approximately 3 millimeters in diameter. From the information you provided, the balls are designed for water filtration applications. In subsequent correspondence with this office,
The tariff classification of ceramic pistons and sleeves from Germany.
This analysis has been completed. The merchandise under consideration is five ceramic pistons with their accompanying sleeves. They are piston 26580, which measures approximately 18 millimeters (mm) high by 15 mm in diameter at its widest p
The tariff classification of a ceramic seal from China.
This analysis has been completed. The ceramic seal measures approximately .875 inches high by 1.8 inches in diameter at its widest points, and is made of silicon carbide ceramic. From the information you provided, this seal is designed to b
Ruling Request Classification of Scandia Stabilized Zirconia Sheets and Lanthanum Strontium Manganite Powder
In your submission you describe the ScSz sheets as primarily a mixture of Zirconium Dioxide, Scandium Oxide and Cerium Oxide, and bears the description “Ceramic Substrate” or “Zirconium Sheet.” The item is imported in the form of sheets. Th
The tariff classification of a porcelain ceramic roller, ceramic diffuser disc, ceramic filter plate and a porcelain ceramic blank from Germany or China.
This analysis has been completed. A fifth item, described as a filter drier core, was previously classified as 8421.29.0065 Harmonized Tariff Schedule of the United States (HTSUS) in ruling N236294, issued December 20, 2012. The roller is c
The tariff classification of a ceramic brick from Belgium.
S. Customs and Border Protection Laboratory for analysis. This analysis has been completed. The brick measures approximately 9 inches long by 4 inches wide by 2.5 inches high at its widest points, tapering to a height of 2 inches. Laborator
The tariff classification of a ceramic terminator from China.
The ceramic terminator measures approximately 1.5 inches long and .625 inches in diameter at one end, tapering to a diameter of .25 inches at the other end.
The tariff classification of ceramic short tube and ceramic tube adapter from China.
The Short Tube measures approximately 1.38 inches long, and is used to create a rigid entryway for flexible 5/8-inch tubing or grommets.
The tariff classification of bearing and seal kits from Italy
Descriptive literature and representative samples were included with your submission. The samples will be returned to you. The products under consideration are described as Campagnolo Bottom Bracket bearing and seal kits.
The tariff classification of ceramic bushings from China.
Item number ING101250TR is a male bushing which measures approximately .8 inches high by .8 inches in diameter at its widest points, while item number ING101260TR is a female bushing measuring approximately .5 inches high by .8 inches in di
The tariff classification of a ceramic reducer from China.
The reducer is made of steatite ceramic and measures approximately 3.9 inches long. One end of the reducer is designed to accept 5/8 inch tubing, while the other end accepts ¼ inch tubing.
The tariff classification of ceramic ball bearing sets from China
Descriptive literature and a picture were included with your submission. The items under consideration are identified as Full Speed Ahead (FSA) ceramic ball bearing sets. You indicate that these bearing sets are designed for use on bicycles
Other codes in heading 6909
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 6909.19.50 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →