10 newer rulings cite the same tariff codes.
Classification can shift over time. Review the more recent rulings below before relying on this one.
RE: The country of origin of an automotive carrier assembly
Issued September 29, 2026 by U.S. Customs and Border Protection.
Cite this ruling
Copies to clipboardNY N365092 (September 29, 2026)
Tariff classification
Product description
, Ltd. The article under consideration is an automotive carrier assembly identified as the MV/ME Carrier Assembly, part number 52710-DO000. The merchandise is a component of the rear suspension system of a motor vehicle. The carrier provides mounting points for the lower arm, upper arm, assist arm, trailing arm, constant velocity joint, wheel speed sensor, brake caliper, and wheel. The carrier assembly supports the rear wheel load and facilitates the functions of power transmission, wheel-speed detection, vibration and shock absorption, braking, and steering. The finished carrier assembly consists primarily of the MV/ME Machined Carrier (part number 52715-DO000), the LFa Pillow Ball Assembly (part number 55130-B1000N), and the MV/ME Bush (part number 55278-GI000). According to the information provided, the manufacturing process begins in South Korea with the production of the MV/ME Cast Carrier (part number M52715-DO000). Aluminum ingot, aluminum scrap, aluminum-strontium, and magnesium of Chinese origin are imported into South Korea. The submitted photographs show the aluminum received in ingot and scrap form, the aluminum-strontium received in round-bar form, and the magnesium received in small ingot or block form. These raw materials undergo melting, tapping, degassing, casting, trimming, cutting, deburring, heat treatment, X-ray inspection, and packaging, creating a specifically shaped casting. The casting is then inspected and machined to establish the reference surface and inner diameter. Additional operations are performed on the caliper, arm-link mounting points, and other surfaces and openings. The carrier undergoes grinding, finishing, and inspection. Following machining, the LFa Pillow Ball Assembly, and MV/ME Bush, which are sourced from Korean suppliers, are incorporated into the carrier. The bush components are press-fitted into the appropriate mounting locations, and the pillow ball assembly is installed. The completed article is then inspected and su
CBP rationale
substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). In this case, the materials imported from China into South Korea consist of aluminum ingot, aluminum scrap intended for remelting, aluminum-strontium allot, and magnesium. At the time of their importation into South Korea, these materials do not possess the name, shape, character, or dedicated use of an automotive carrier. Instead, it is in South Korea that the Chinese-origin materials are melted and processed and then cast into the specifically shaped 52710-DO000 Carrier Assembly. The Korean casting operation imparts the article with the basic physical configuration and dedicated automotive use of a knuckle, including the structure from which the various suspension, steering, and braking mounting features are subsequently machined. Accordingly, the casting operation results in a distinct article of commerce having a new name, character, and use different from the Chinese-origin materials from which it was produced. Based on the totality of the circumstances, we find that the Chinese-origin materials undergo a substantial transformation in South Korea when they are processed and cast into the MV/ME Carrier Assembly, part number 52710-DO000. Accordingly, the country of origin of the finished MV/ME Carrier Assembly, part number 52710-DO000, is South Korea. The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations (CFR), Section 177.
Full text
U.S. Department of Homeland Security U.S. Customs and Border Protection National Commodity Specialist Division One World Trade Center, Suite 51.201 New York, NY 10007 U.S. Customs and Border Protection N365092 September 29, 2026 OT:RR:NC:N2:206 CATEGORY: Origin Jiwon Kwon Cusan Customs Service Incorporation 309, 35, Magokjungang 2-ro, Gangseo-gu, Seoul 07806 South Korea RE: The country of origin of an automotive carrier assembly Dear Ms. Kwon: In your letter dated September 15, 2026, you requested a country of origin ruling on an automotive carrier assembly on behalf of Seohan Innobility Co., Ltd. The article under consideration is an automotive carrier assembly identified as the MV/ME Carrier Assembly, part number 52710-DO000. The merchandise is a component of the rear suspension system of a motor vehicle. The carrier provides mounting points for the lower arm, upper arm, assist arm, trailing arm, constant velocity joint, wheel speed sensor, brake caliper, and wheel. The carrier assembly supports the rear wheel load and facilitates the functions of power transmission, wheel-speed detection, vibration and shock absorption, braking, and steering. The finished carrier assembly consists primarily of the MV/ME Machined Carrier (part number 52715-DO000), the LFa Pillow Ball Assembly (part number 55130-B1000N), and the MV/ME Bush (part number 55278-GI000). According to the information provided, the manufacturing process begins in South Korea with the production of the MV/ME Cast Carrier (part number M52715-DO000). Aluminum ingot, aluminum scrap, aluminum-strontium, and magnesium of Chinese origin are imported into South Korea. The submitted photographs show the aluminum received in ingot and scrap form, the aluminum-strontium received in round-bar form, and the magnesium received in small ingot or block form. These raw materials undergo melting, tapping, degassing, casting, trimming, cutting, deburring, heat treatment, X-ray inspection, and packaging, creating a specifically shaped casting. The casting is then inspected and machined to establish the reference surface and inner diameter. Additional operations are performed on the caliper, arm-link mounting points, and other surfaces and openings. The carrier undergoes grinding, finishing, and inspection. Following machining, the LFa Pillow Ball Assembly, and MV/ME Bush, which are sourced from Korean suppliers, are incorporated into the carrier. The bush
components are press-fitted into the appropriate mounting locations, and the pillow ball assembly is installed. The completed article is then inspected and supplied as the MV/ME Carrier Assembly, part number 52710-DO000. When determining the country of origin, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). In this case, the materials imported from China into South Korea consist of aluminum ingot, aluminum scrap intended for remelting, aluminum-strontium allot, and magnesium. At the time of their importation into South Korea, these materials do not possess the name, shape, character, or dedicated use of an automotive carrier. Instead, it is in South Korea that the Chinese-origin materials are melted and processed and then cast into the specifically shaped 52710-DO000 Carrier Assembly. The Korean casting operation imparts the article with the basic physical configuration and dedicated automotive use of a knuckle, including the structure from which the various suspension, steering, and braking mounting features are subsequently machined. Accordingly, the casting operation results in a distinct article of commerce having a new name, character, and use different from the Chinese-origin materials from which it was produced. Based on the totality of the circumstances, we find that the Chinese-origin materials undergo a substantial transformation in South Korea when they are processed and cast into the MV/ME Carrier Assembly, part number 52710-DO000. Accordingly, the country of origin of the finished MV/ME Carrier Assembly, part number 52710-DO000, is South Korea. The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations (CFR), Section 177.9(b)(1). This section states that a ruling letter is issued on the assumption that all of the information furnished in the ruling letter, whether directly, by reference, or by implication, is accurate and complete in every material respect. In the event that the facts are modified in any way, or if the goods do not conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and Border Protection (CBP) and submit a request for a new ruling in accordance with 19 CFR 177.2. Additionally, we note that the material facts described in the foregoing ruling may be subject to periodic verification by CBP. This ruling is being issued under the provisions of Part 177 of the Customs and Border Protection Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, please contact National Import Specialist Liana Alvarez at [email protected]. Sincerely, (for) James P. Forkan Director National Commodity Specialist Division
More rulings on the same tariff codes
RE: Stallings,
RE: The country of origin of a pencil tire gauge
RE: The country of origin of electric steam irons
RE: The country of origin of a pneumatic impact wrench
RE: The Country of Origin of Salmon
RE: The country of origin of wrapping paper
RE: The country of origin of wrapping paper
RE: The country of origin of air tool filters
RE: The country of origin of a pressure gauge
RE: The country of origin of helical coil springs
Follow N365092
Get an email if this ruling is revoked or modified, or a newer ruling supersedes it.
One email per day at most. Confirm your address once, unsubscribe anytime.
Searching CBP rulings the smart way
Rulings are precedent. See which ones apply to your product: TariffLens semantically searches all 200,000+ CBP rulings and builds defensible classifications backed by ruling citations.