2 newer rulings cite the same tariff codes.
Classification can shift over time. Review the more recent rulings below before relying on this one.
The tariff classification of a self-drilling screw from Taiwan
Issued October 4, 2022 by U.S. Customs and Border Protection.
Cite this ruling
Copies to clipboardN3 N328061 (October 4, 2022)
Tariff classification
HTS codes: 7318.14.1060
Headings: 7318
Product description
The submitted samples were examined and will be retained by this office. The merchandise under consideration is described as an 8 x ½ self-drilling K-lathe screw with a zinc & clear chromate finish, a cross (Phillips) recessed head, a BSD thread, and a type #2 self-drilling point. It is a self-tapping K-lath screw made of carbon steel and is less than 6 mm in diameter. This screw is designed to secure material to thin steel.
CBP rationale
The applicable subheading for the 8 x ½ self-drilling K-lathe screw with a zinc & clear chromate finish, a cross (Phillips) recessed head, a BSD thread, and a type #2 self-drilling point will be 7318.14.1060, Harmonized Tariff System of the United States (HTSUS), which provides for Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel: Threaded articles: Self-tapping screws: Having shanks or threads with a diameter of less than 6 mm: Other.
Full text
N328061 October 4, 2022 CLA-2-73:OT:RR:NC:N1:121 CATEGORY: Classification TARIFF NO.: 7318.14.1060 Jeff Green M. Green Co. P.O. Box 46847 Philadelphia, PA 19140 RE: The tariff classification of a self-drilling screw from Taiwan Dear Mr. Green: In your letter dated August 26, 2022, you requested a tariff classification ruling. The submitted samples were examined and will be retained by this office. The merchandise under consideration is described as an 8 x ½ self-drilling K-lathe screw with a zinc & clear chromate finish, a cross (Phillips) recessed head, a BSD thread, and a type #2 self-drilling point. It is a self-tapping K-lath screw made of carbon steel and is less than 6 mm in diameter. This screw is designed to secure material to thin steel. The applicable subheading for the 8 x ½ self-drilling K-lathe screw with a zinc & clear chromate finish, a cross (Phillips) recessed head, a BSD thread, and a type #2 self-drilling point will be 7318.14.1060, Harmonized Tariff System of the United States (HTSUS), which provides for Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel: Threaded articles: Self-tapping screws: Having shanks or threads with a diameter of less than 6 mm: Other. The duty rate will be 6.2% ad valorem. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided at https://hts.usitc.gov/current. With respect to your questions regarding quota or visa restrictions and other government agency regulations, please direct those questions to Ms. Gail Kan, U.S. Customs and Border Protection, Branch Chief Entry Branch & Duty Refunds, 90 K Street NE, Washington DC, 20002. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Jennifer Jameson at [email protected]. Sincerely, Steven A. Mack Director National Commodity Specialist Division
More rulings on the same tariff codes
The tariff classification of hardware packs from China
The tariff classification of screws from Taiwan
The tariff classification of a thread cutting screw from Taiwan
The tariff classification of a tapping screw from Taiwan
The tariff classification of a multipurpose construction screw kit from Taiwan
The tariff classification and country of origin of metal screws and plastic anchors packaged together as a set
The country of origin of screws and anchors packaged as a set
The tariff classification of a screw and anchor kit from China.
The tariff classification of a screw kit from China.
The tariff classification and marking requirements of items from various countries included in a countertop installation kit.
Follow N328061
Get an email if this ruling is revoked or modified, or a newer ruling supersedes it.
One email per day at most. Confirm your address once, unsubscribe anytime.
Searching CBP rulings the smart way
Rulings are precedent. See which ones apply to your product: TariffLens semantically searches all 200,000+ CBP rulings and builds defensible classifications backed by ruling citations.