The tariff classification of veneered flooring panels from China

N266736 August 11, 2015 CLA-2-44:OT:RR:NC:2:230 CATEGORY: Classification TARIFF NO.: 4412.99.5105 Mr. Don Zimmerman Wellmade Floor Coverings International, Inc. 26100 SW 95th Ave Suite 205 Wilsonville, OR 97070 RE: The tariff classification of veneered flooring panels from China Dear Mr. Zimmerman: In your letter dated July 13, 2015, you requested a tariff classification ruling. The ruling was requested on veneered flooring panels. One representative sample was submitted for our review. The sample will be retained for future reference. The sample panel measures approximately 6” (W) x 7.5 mm in thickness. The panel is constructed of a 2mm thick wood veneer laminated onto a 5.5mm thick layer of wood plastic composite (WPC).You state that the face ply will consist of a Hickory or Walnut wood veneer. While you state that the WPC substrate is a single layer, it is actually composed of four layers of various plastics. The panel is tongued and grooved on its edges with an interlocking profile and is coated with a UV finish. The panels will be imported in 9”in width and lengths of up to 72”. The panel meets the definition of a “veneered panel” as set forth in the Explanatory Notes (ENs) to the Harmonized Tariff Schedule of the United States (HTSUS) for heading 4412: “Veneered panels…are panels consisting of a thin veneer of wood affixed to a base, usually of inferior wood, by gluing under pressure.” Therefore, in accordance with General Rule of Interpretation 1, the product will be classified in heading 4412, which specifically provides for veneered panels. The applicable subheading for the veneered flooring panels will be 4412.99.5105, HTSUS, which provides for Plywood, veneered panels and similar laminated wood: Other (than plywood consisting solely of sheets of wood under 6 mm in thickness): Other (than blockboard, laminboard and battenboard): With at least one outer ply of nonconiferous wood: Other (than with at least one layer of particle board): Other (than plywood). The rate of duty will be free. The wood flooring in question, which is tongued and grooved with an interlocking profile, may be subject to an ITC exclusion order dealing with certain laminated floor panels (ITC Investigation No. 337-TA-545). The determination of whether your flooring panels are subject to the ITC Exclusion Order will be made independently of the tariff classification ruling. For further information on admissibility please contact your local Customs office prior to importation of the goods. If you require a written ruling on whether the exclusion order applies to your flooring panels, you should submit a ruling request with a sample of the flooring panels to the following office: U.S. Customs and Border Protection, IPR & Restricted Merchandise Branch, Regulations and Rulings, 799 9th Street N.W. – 7th Floor, Washington, DC 20229-1177. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided on World Wide Web at http://www.usitc.gov/tata/hts/. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Laurel Duvall at [email protected]. Sincerely, Gwenn Klein Kirschner Director National Commodity Specialist Division