The tariff classification of a roll spring from Germany
Issued July 20, 2010 by U.S. Customs and Border Protection.
Tariff classification
HTS codes: 8503.00.9520
Headings: 8503
Product description
The item concerned is referred to as a roll spring (AF064285-8010). It is made from cold hammered rolled steel. The roll spring is used within the motor assemble of a fuel pump. The spring is used to apply a specific force to the brushes of an electric motor in order to assure that the brushes stay in firm contact with the armature commutator. The brushes allow for the transfer of electrical current through the motor. The roll springs are used with a brushed DC motor with a maximum power output of 100 watts. You assert in your letter that the roll spring should be classified in subheading 8413.91.9010, HTSUS, which provides parts of pumps. This office, however, disagrees. Since the roll spring is more specifically a part of the motor assembly of the fuel pump, under Legal Note 2(b) to Section XVI, it would be classified as a part of an electric motor. Consequently, the roll spring would not be classified under heading 8413.
CBP rationale
The applicable subheading for the roll spring (AF064285-8010) will be 8503.00.9520, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Parts suitable for use solely or principally with the machines of heading 8501 or 8502: Other: Other: Parts of motors”.
Full text
N114775 July 20, 2010 CLA-2-85:OT:RR:NC:N1:112 CATEGORY: Classification TARIFF NO.: 8503.00.9520 Kevin Hardy Associated Fuel Pump Systems Corporation 1100 Scotts Bridge Road P.O. Box 1326 Anderson, SC 29622 RE: The tariff classification of a roll spring from Germany Dear Mr. Hardy: In your letter received by this office on July 5, 2010, you requested a tariff classification ruling. The item concerned is referred to as a roll spring (AF064285-8010). It is made from cold hammered rolled steel. The roll spring is used within the motor assemble of a fuel pump. The spring is used to apply a specific force to the brushes of an electric motor in order to assure that the brushes stay in firm contact with the armature commutator. The brushes allow for the transfer of electrical current through the motor. The roll springs are used with a brushed DC motor with a maximum power output of 100 watts. You assert in your letter that the roll spring should be classified in subheading 8413.91.9010, HTSUS, which provides parts of pumps. This office, however, disagrees. Since the roll spring is more specifically a part of the motor assembly of the fuel pump, under Legal Note 2(b) to Section XVI, it would be classified as a part of an electric motor. Consequently, the roll spring would not be classified under heading 8413. The applicable subheading for the roll spring (AF064285-8010) will be 8503.00.9520, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Parts suitable for use solely or principally with the machines of heading 8501 or 8502: Other: Other: Parts of motors”. The rate of duty will be 3%. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided on World Wide Web at http://www.usitc.gov/tata/hts/. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Steven Pollichino at (646) 733-3008. Sincerely, Robert B. Swierupski Director National Commodity Specialist Division
More rulings on the same tariff codes
The tariff classification of parts for motors and sensors from various countries
The tariff classification of parts of flight control surfaces from Canada and Mexico
The tariff classification of housings for 5 electric motors from Vietnam
Application for Further Review of Protest Number 390118100874; 19 C.F.R. § 10.31(g)
The classification of components used within the blower assembly from China or Malaysia
The classification of a blower assembly and components used within the blower assembly from China, Indonesia, or Malaysia.
The tariff classification of motor laminations from China and Mexico
The tariff classification of a bearing protection ring from an undisclosed country of origin.
The tariff classification of motor parts from an undetermined country of origin
The tariff classification of a ground terminal, plate terminal and choke coil assembly from Germany
Searching CBP rulings the smart way
TariffLens semantically searches all 200,000+ CBP rulings, surfaces the ones that actually match your product, and builds defensible classifications backed by ruling citations.
Book a demo →