The tariff classification of wood paneling from The Netherlands and China.
Issued October 22, 2009 by U.S. Customs and Border Protection.
Tariff classification
HTS codes: 4409.10.9040
Headings: 4409
Product description
The wood wall paneling is made of solid pine and is mechanically worked. The wood wall paneling is used for covering walls. The wood wall paneling will be imported with the measurements of 5/16” x 4” x 96”(L). Sample # 1: “The Center Bead” wood wall paneling is made in The Netherlands. It is tongued and grooved along its edges and beaded along the center and along one edge of the face. The ends are square cut, that is, unworked. Sample # 2: “The V-Groove” wood wall paneling is made in The Netherlands. It is tongued and grooved along its edges and square cut at the ends. Sample # 3:“The Pick Wick” wood wall paneling is made in The Netherlands. It is tongued and grooved along its edges and is beaded along one edge of the face. The ends are square cut, that is, unworked. Sample # 4:“The V-Groove” wood wall paneling is made in The Netherlands. It is tongued and grooved along its edges and square cut at the ends. Sample # 5: “The V-Groove” wood wall paneling is made in China. It is tongued and grooved along its edges and square cut at the ends.
Full text
N078759 October 22, 2009 CLA-2-44:OT:RR:NC:2:230 CATEGORY: Classification TARIFF NO.: 4409.10.9040 Ms. Jan Trammell Richard Murray & Co., Inc 109 North Conception Street P.O. Drawer 30 Mobile, AL. 36601 RE: The tariff classification of wood paneling from The Netherlands and China. Dear Ms.Trammell: In your letter dated October 1, 2009 you requested a tariff classification ruling on behalf of Empire Wholesale. The ruling was requested on “wood wall paneling”. Five samples of the wall paneling were submitted for our review. The wood wall paneling is made of solid pine and is mechanically worked. The wood wall paneling is used for covering walls. The wood wall paneling will be imported with the measurements of 5/16” x 4” x 96”(L). Sample # 1: “The Center Bead” wood wall paneling is made in The Netherlands. It is tongued and grooved along its edges and beaded along the center and along one edge of the face. The ends are square cut, that is, unworked. Sample # 2: “The V-Groove” wood wall paneling is made in The Netherlands. It is tongued and grooved along its edges and square cut at the ends. Sample # 3:“The Pick Wick” wood wall paneling is made in The Netherlands. It is tongued and grooved along its edges and is beaded along one edge of the face. The ends are square cut, that is, unworked. Sample # 4:“The V-Groove” wood wall paneling is made in The Netherlands. It is tongued and grooved along its edges and square cut at the ends. Sample # 5: “The V-Groove” wood wall paneling is made in China. It is tongued and grooved along its edges and square cut at the ends. You believe that the subject wood paneling should be classified under subheading 4409.10.4090, HTSUS which provides for wood continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed, coniferous, other wood moldings; standard wood moldings; pine (Pinus spp.); other (than end-jointed). However as per further information submitted, the importer states that the wood paneling is used for covering walls; therefore it can not be classified under wood moldings. The applicable subheading for the wood wall paneling will be 4409.10.9040, Harmonized Tariff Schedule of the United States (HTSUS), which provides for: Wood continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, molded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed: Coniferous: Other (than wood continuously shaped along any of its ends): Other: Other. The general rate of duty will be free. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided on World Wide Web at http://www.usitc.gov/tata/hts/. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Paul Garretto at (646) 733-3035. Sincerely, Robert B. Swierupski Director National Commodity Specialist Division
More rulings on the same tariff codes
The tariff classification of wooden fence pickets from China
The tariff classification of Kebony panels from multiple countries
The tariff classification of shaped wood boards from China
The tariff classification of wood decking from China
The tariff classification of shiplap wood boards from Canada
The tariff classification of pine tongue and groove ceiling decking
The tariff classification of wooden door components from Canada
The tariff classification of wooden stretcher bars from Latvia, Chile, Argentina, and Brazil
The tariff classification of cedar deterrents from China
The tariff classification of wooden slats and rollers from Canada
Searching CBP rulings the smart way
TariffLens semantically searches all 200,000+ CBP rulings, surfaces the ones that actually match your product, and builds defensible classifications backed by ruling citations.
Book a demo →