5 newer rulings cite the same tariff codes.
Classification can shift over time. Review the more recent rulings below before relying on this one.
The tariff classification of a brake booster assembly with control module from Japan.
Issued July 24, 2007 by U.S. Customs and Border Protection.
Cite this ruling
Copies to clipboardN0 N014493 (July 24, 2007)
Tariff classification
HTS codes: 8413.50.0080
Headings: 8413
Product description
The item in question is described as a brake booster assembly with control module, Part Number 136010-18400-C. The assembly contains an electric motor that is used to drive a piston pump to discharge hydraulic fluid into an accumulator. As hydraulic pressure builds in the brake lines, a piston is forced out and causes brake pads to squeeze on the drums to stop the vehicle. The control module simply controls the operation of the pump in response to input from the ECU and the driver. Descriptive information was submitted. In your request you indicate the brake booster assembly with control module is properly classified under subheading 9032.89.6085, Harmonized Tariff Schedule of the United States (HTSUS), which provides for other automatic regulating or controlling instruments and apparatus. However, the booster assembly does not contain an automatic control device that gives instructions to the pump to maintain pressure at the chosen value. Accordingly, we find that the booster assembly is more specifically provided for as a pump of heading 8413, HTSUS.
CBP rationale
the applicable subheading for the brake booster assembly with control module will be 8413.50.0080, Harmonized Tariff Schedule of the United States (HTSUS), which provides for other reciprocating positive displacement pumps for hydraulic fluid.
Full text
N014493 July 24, 2007 CLA-2-84:RR:E:NC:N1:102 CATEGORY: Classification TARIFF NO.: 8413.50.0080 Mr. Dennis J. Forhart PricewaterhouseCoopers LLP 2020 Main Street Suite 400 Irvine, CA 92614 RE: The tariff classification of a brake booster assembly with control module from Japan. Dear Mr. Forhart: This letter replaces New York Ruling N011979 which you recently received. In reviewing that letter the ruling was issued on behalf of the incorrect party. That error has been corrected in the text below. In your letter dated May 16, 2007 you requested a tariff classification ruling on behalf of your client Aisin Holdings of America. The item in question is described as a brake booster assembly with control module, Part Number 136010-18400-C. The assembly contains an electric motor that is used to drive a piston pump to discharge hydraulic fluid into an accumulator. As hydraulic pressure builds in the brake lines, a piston is forced out and causes brake pads to squeeze on the drums to stop the vehicle. The control module simply controls the operation of the pump in response to input from the ECU and the driver. Descriptive information was submitted. In your request you indicate the brake booster assembly with control module is properly classified under subheading 9032.89.6085, Harmonized Tariff Schedule of the United States (HTSUS), which provides for other automatic regulating or controlling instruments and apparatus. However, the booster assembly does not contain an automatic control device that gives instructions to the pump to maintain pressure at the chosen value. Accordingly, we find that the booster assembly is more specifically provided for as a pump of heading 8413, HTSUS. Based on the information provided, the applicable subheading for the brake booster assembly with control module will be 8413.50.0080, Harmonized Tariff Schedule of the United States (HTSUS), which provides for other reciprocating positive displacement pumps for hydraulic fluid. The rate of duty is free. Duty rates are provided for your convenience and are subject to change. The text of the most recent HTSUS and the accompanying duty rates are provided on World Wide Web at http://www.usitc.gov/tata/hts/. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Kenneth T. Brock at 646-733-3009. Sincerely, Robert B. Swierupski Director, National Commodity Specialist Division
Ruling history
More rulings on the same tariff codes
The classification of a master cylinder, a booster, and a master cylinder booster assembly from Mexico
The tariff classification of a hydraulic pump from China
The tariff classification of Brake Booster Assemblies from Germany.
The tariff classification of brake booster assemblies from Japan
The tariff classification of brake booster assemblies from Japan
The tariff classification of a brake booster assembly with control module from Japan.
The tariff classification of axial piston pumps from Germany
The tariff classification of a Hydraulic Power Unit fromCanada.
Follow N014493
Get an email if this ruling is revoked or modified, or a newer ruling supersedes it.
One email per day at most. Confirm your address once, unsubscribe anytime.
Searching CBP rulings the smart way
Rulings are precedent. See which ones apply to your product: TariffLens semantically searches all 200,000+ CBP rulings and builds defensible classifications backed by ruling citations.