2 newer rulings cite the same tariff codes.
Classification can shift over time. Review the more recent rulings below before relying on this one.
The tariff classification of parts for a powder feeder from Japan
Issued August 19, 2005 by U.S. Customs and Border Protection.
Cite this ruling
Copies to clipboardL8 L86799 (August 19, 2005)
Tariff classification
HTS codes: 8479.90.9495
Headings: 8479
Product description
You have provided samples of parts used in a Sulzer-Metco Twin-120-A Powder Feeder and a component manual for the feeder itself. The samples will be returned as requested. The Twin 120-A provides precise, volumetric feeding of powdered material. The feeder is used to dispense powder in a plasma spray process; the specific application of these parts is regulating the amount of powder fed to the plasma spray gun. The parts, all made of hard plastic, include: STS0001 Powder feeder disk NL/30 Spreader Device NL Suction Device The power feeder disk, described in the component manual as a drive metering disk, is driven by a geared motor (not included). It is approximately 5 ¾ inches in diameter and ¼ inch thick. The spreader determines the amount of powder that will be fed along with the speed of the metering disk. It has a recessed oval shaped hole approximately ¾ inch at its widest point. The suction part takes up all the powder transported in the groove. It also has a recessed area with a round hole approximately 1/8 inch in diameter at the bottom. Both the spreader device and suction device are approximately 5/16 inch thick with shapes which defy easy description. Each has one straight side of approximately 1 7/8 inches and three curved sides.
CBP rationale
The applicable subheading for the powder feeder disk, spreader device and suction device will be 8479.90.9495, Harmonized Tariff Schedule of the United States (HTS), which provides for other parts of machines and mechanical appliances having individual functions, not specified or included elsewhere in chapter 84.
Full text
NY L86799 August 19, 2005 CLA-2-84:RR:NC:1:104 L86799 CATEGORY: Classification TARIFF NO.: 8479.90.9495 Ms. Sherry Jenkins Materials Manager NxEdge 7500 W. Mossy Cup St. Boise, ID 83709 RE: The tariff classification of parts for a powder feeder from Japan Dear Ms. Jenkins: In your letter dated July 27, 2005 you requested a tariff classification ruling. You have provided samples of parts used in a Sulzer-Metco Twin-120-A Powder Feeder and a component manual for the feeder itself. The samples will be returned as requested. The Twin 120-A provides precise, volumetric feeding of powdered material. The feeder is used to dispense powder in a plasma spray process; the specific application of these parts is regulating the amount of powder fed to the plasma spray gun. The parts, all made of hard plastic, include: STS0001 Powder feeder disk NL/30 Spreader Device NL Suction Device The power feeder disk, described in the component manual as a drive metering disk, is driven by a geared motor (not included). It is approximately 5 ¾ inches in diameter and ¼ inch thick. The spreader determines the amount of powder that will be fed along with the speed of the metering disk. It has a recessed oval shaped hole approximately ¾ inch at its widest point. The suction part takes up all the powder transported in the groove. It also has a recessed area with a round hole approximately 1/8 inch in diameter at the bottom. Both the spreader device and suction device are approximately 5/16 inch thick with shapes which defy easy description. Each has one straight side of approximately 1 7/8 inches and three curved sides. The applicable subheading for the powder feeder disk, spreader device and suction device will be 8479.90.9495, Harmonized Tariff Schedule of the United States (HTS), which provides for other parts of machines and mechanical appliances having individual functions, not specified or included elsewhere in chapter 84. The rate of duty will be free. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Robert Losche at 646-733-3011. Sincerely, Robert B. Swierupski Director, National Commodity Specialist Division
More rulings on the same tariff codes
The tariff classification of parts used in a Piston Accumulator from Germany.
The tariff classification of hose reel parts and assemblies from China.
The tariff classification of a blood sample preparation system from Japan
The tariff classification of a hybridization system from the U.S.
The tariff classification of rubber and plastic bladders from the United Kingdom.
The tariff classification of impellers from an unknown country
Follow L86799
Get an email if this ruling is revoked or modified, or a newer ruling supersedes it.
One email per day at most. Confirm your address once, unsubscribe anytime.
Searching CBP rulings the smart way
Rulings are precedent. See which ones apply to your product: TariffLens semantically searches all 200,000+ CBP rulings and builds defensible classifications backed by ruling citations.