K89351 K8 Ruling Active

The tariff classification of slot-wall panels from China.

Issued October 5, 2004 by U.S. Customs and Border Protection.

Tariff classification

HTS codes: 3916.20.0091

Headings: 3916

Product description

The slot-wall panels, also identified as Gladiator GearWall panels, are designed to be mounted onto the interior walls of garages or basements. The panels are composed of a blend of polyvinyl chloride (PVC) and chlorinated polyvinyl chloride (CPVC) plastics. They are extruded in a single process to form panels that incorporate grooves. The panels have a uniform cross section throughout their lengths and have not been drilled, routed or otherwise worked. The grooves are used to accept an array of holders and accessories such as shelves, brackets, baskets, trays, hooks and racks. The grooves facilitate the placement of the accessories in any position and secure the accessories firmly in place.

CBP rationale

The applicable subheading for the slot-wall panels will be 3916.20.0091, Harmonized Tariff Schedule of the United States (HTS), which provides for monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics: of polymers of vinyl chloride, other.

Full text

NY K89351 October 5, 2004 CLA-2-39:RR:NC:SP:221 K89351 CATEGORY: Classification TARIFF NO.: 3916.20.0091 Mr. Darren Fitzgerald Whirlpool Corporation 150 Hilltop Road MD-7590 St. Joseph, MI 49085 RE: The tariff classification of slot-wall panels from China. Dear Mr. Fitzgerald: In your letter dated August 30, 2004, you requested a tariff classification ruling. A sample was provided with your letter. The slot-wall panels, also identified as Gladiator GearWall panels, are designed to be mounted onto the interior walls of garages or basements. The panels are composed of a blend of polyvinyl chloride (PVC) and chlorinated polyvinyl chloride (CPVC) plastics. They are extruded in a single process to form panels that incorporate grooves. The panels have a uniform cross section throughout their lengths and have not been drilled, routed or otherwise worked. The grooves are used to accept an array of holders and accessories such as shelves, brackets, baskets, trays, hooks and racks. The grooves facilitate the placement of the accessories in any position and secure the accessories firmly in place. The applicable subheading for the slot-wall panels will be 3916.20.0091, Harmonized Tariff Schedule of the United States (HTS), which provides for monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics: of polymers of vinyl chloride, other. The rate of duty will be 5.8 percent ad valorem. . This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Joan Mazzola at 646-733-3023. Sincerely, Robert B. Swierupski Director, National Commodity Specialist Division

View original on CBP CROSS →

More rulings on the same tariff codes

Searching CBP rulings the smart way

TariffLens semantically searches all 200,000+ CBP rulings, surfaces the ones that actually match your product, and builds defensible classifications backed by ruling citations.

Book a demo →