This ruling has been modified and is no longer current.
Superseded by {H320950}.
The tariff classification of collet gland assemblies, glands, collars and plugs.
Issued April 9, 2003 by U.S. Customs and Border Protection.
Cite this ruling
Copies to clipboardJ8 J82246 (April 9, 2003)
Tariff classification
HTS codes: 7507.20.00, 7508.90.50, 7326.90.85, 7307.29.00, 8109.90.00, 8108.90.60, 8108.90.30
Product description
You state that the materials of these items are either stainless steel, nickel, zirconium or titanium. A typical use of collet gland assembly is to connect a tubing line to a compressor. Glands, collars and plugs are used in conjunction with tubing, valves and fittings. The collar and gland component connect to the end of a tube to allow the tube to connect to a valve or fitting. The plug seals off the connection so no media can pass through it. You indicate that the part numbers are KGL-40 for the collet gland assemblies, AGL-40 for the glands, ACL-40 for the collars and AP-40 for the plugs. The 40 designation is indicative of the products diameter of ¼”. An additional designation of the material is added after the size (i.e. SS (stainless steel), Ni (nickel), Zi (zirconium), and Ti (titanium).
CBP rationale
The applicable subheading for the stainless steel collet gland assemblies will be 7307.29.00, Harmonized Tariff Schedule of the United States (HTS), which provides for tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel: other: of stainless steel: other. The applicable subheading for the stainless steel glands, collars and plugs will be 7326.90.85, HTS, which provides for other articles of iron or steel: other: other: other: other: other. The applicable subheading for all of the nickel collet gland assemblies will be 7507.20.00, HTS, which provides for nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves): tube or pipe fittings. The applicable subheading for the nickel glands, collars and plugs will be 7508.90.50, HTS, which provides for other articles of nickel: other: other. The applicable subheading for the zirconium collet gland assemblies, glands, collars and plugs will be 8109.90.00, HTS, which provides for zirconium and articles thereof, including waste and scrap: other. The applicable subheading for the titanium collet gland assemblies, will be 8108.90.60, HTS, which provides for titanium and articles thereof, including waste and scrap: other: other: other. The applicable subheading for the titanium glands, collars and plugs will be 8108.90.30, HTS, which provides for titanium and articles thereof, including waste and scrap: other: articles of titanium: other.
Full text
NY J82246 April 9, 2003 CLA-2-73:RR:NC:1:118 J82246 CATEGORY: Classification TARIFF NO.: 7326.90.85; 7307.29.00; 7507.20.00; 7508.90.50; 8109.90.00; 8108.90.60; 8108.90.30 Ms. Shelley Vybiral Snap-tite Inc. 8325 Hessinger Dr Erie, PA 16509 RE: The tariff classification of collet gland assemblies, glands, collars and plugs. Dear Ms. Vybiral: In your letter dated March 7, 2003, you requested a tariff classification ruling for items that you have described as collet gland assemblies, glands, collars and plugs. You state that the materials of these items are either stainless steel, nickel, zirconium or titanium. A typical use of collet gland assembly is to connect a tubing line to a compressor. Glands, collars and plugs are used in conjunction with tubing, valves and fittings. The collar and gland component connect to the end of a tube to allow the tube to connect to a valve or fitting. The plug seals off the connection so no media can pass through it. You indicate that the part numbers are KGL-40 for the collet gland assemblies, AGL-40 for the glands, ACL-40 for the collars and AP-40 for the plugs. The 40 designation is indicative of the products diameter of ¼”. An additional designation of the material is added after the size (i.e. SS (stainless steel), Ni (nickel), Zi (zirconium), and Ti (titanium). The applicable subheading for the stainless steel collet gland assemblies will be 7307.29.00, Harmonized Tariff Schedule of the United States (HTS), which provides for tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel: other: of stainless steel: other. The applicable subheading for the stainless steel glands, collars and plugs will be 7326.90.85, HTS, which provides for other articles of iron or steel: other: other: other: other: other. The applicable subheading for all of the nickel collet gland assemblies will be 7507.20.00, HTS, which provides for nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves): tube or pipe fittings. The applicable subheading for the nickel glands, collars and plugs will be 7508.90.50, HTS, which provides for other articles of nickel: other: other. The applicable subheading for the zirconium collet gland assemblies, glands, collars and plugs will be 8109.90.00, HTS, which provides for zirconium and articles thereof, including waste and scrap: other. The applicable subheading for the titanium collet gland assemblies, will be 8108.90.60, HTS, which provides for titanium and articles thereof, including waste and scrap: other: other: other. The applicable subheading for the titanium glands, collars and plugs will be 8108.90.30, HTS, which provides for titanium and articles thereof, including waste and scrap: other: articles of titanium: other. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Kathy Campanelli at 646-733-3021. Sincerely, Robert B. Swierupski Director, National Commodity Specialist Division
More rulings on the same tariff codes
Revocation of HQ H027436; forged titanium billets; Additional U.S. Note 1 to Section XV
Revocation of HQ H217623; Modification of HQ 562821; Tariff Classification of name badge components.
Request for Internal Advice Tariff classification of steel grates from China
Reconsideration of NY N253173 and NY N253174; Classification of various chimney system parts from China.
The tariff classification and country of origin of titanium tubes
Reconsideration of NY M82160; Tariff Classification of steel sealing plugs
Revocation of New York Ruling Letter L89621; Classification of Steel Escutcheons
The tariff classification of a dead blow hammer
The tariff classification of Breakout Kits
Revocation of New York Ruling Letter N012463; Classification of a Perforating Gun Assembly
Follow J82246
Get an email if this ruling is revoked or modified, or a newer ruling supersedes it.
One email per day at most. Confirm your address once, unsubscribe anytime.
Searching CBP rulings the smart way
Rulings are precedent. See which ones apply to your product: TariffLens semantically searches all 200,000+ CBP rulings and builds defensible classifications backed by ruling citations.