The tariff classification of a bell crank plate from Korea
Issued July 8, 2002 by U.S. Customs and Border Protection.
Tariff classification
HTS codes: 8431.20.0000
Headings: 8431
Product description
The bell crank plate is a dual-armed steel article, approximately 23 inches long and 6 inches wide at its center, which is fabricated from steel plate ½ inch in thickness. In its imported condition it features two bulges positioned at a slight offset on opposite sides of its center. Each bulge features a pre-punched hole which will allow a hydraulic steer cylinder to be attached to this portion of the article after importation. Each arm also contains a protuberance with a pre-punched hole near its end to allow a steer yoke to be attached, again after importation. The bell crank plate will be used as a linkage in the steering system of Genie’s self-propelled telescopic boom works trucks, for which it is custom fabricated.
CBP rationale
The applicable subheading for the bell crank plate will be 8431.20.0000, Harmonized Tariff Schedule of the United States (HTS), which provides for parts suitable for use solely or principally with the machinery of heading 8427 (fork-lift trucks; other works trucks fitted with lifting or handling equipment).
Full text
NY I82969 July 8, 2002 CLA-2-84:RR:NC:1:103 I82969 CATEGORY: Classification TARIFF NO.: 8431.20.0000 Ms. Jennifer Scott Expeditors International of Washington, Inc. 21318 64th Avenue South Kent, WA 98032 RE: The tariff classification of a bell crank plate from Korea Dear Ms. Scott: In your letters dated April 19, 2002 and June 6, 2002 on behalf of Genie Industries you requested a tariff classification ruling. The bell crank plate is a dual-armed steel article, approximately 23 inches long and 6 inches wide at its center, which is fabricated from steel plate ½ inch in thickness. In its imported condition it features two bulges positioned at a slight offset on opposite sides of its center. Each bulge features a pre-punched hole which will allow a hydraulic steer cylinder to be attached to this portion of the article after importation. Each arm also contains a protuberance with a pre-punched hole near its end to allow a steer yoke to be attached, again after importation. The bell crank plate will be used as a linkage in the steering system of Genie’s self-propelled telescopic boom works trucks, for which it is custom fabricated. The applicable subheading for the bell crank plate will be 8431.20.0000, Harmonized Tariff Schedule of the United States (HTS), which provides for parts suitable for use solely or principally with the machinery of heading 8427 (fork-lift trucks; other works trucks fitted with lifting or handling equipment). The rate of duty will be free. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Alan Horowitz at 646-733-3010. Sincerely, Robert B. Swierupski Director, National Commodity Specialist Division
More rulings on the same tariff codes
The tariff classification of basic bucket and pallet fork attachments from the Czech Republic
The tariff classification of a cured-on tire and press-on tire from Sri Lanka
The tariff classification of wheel tire assemblies from China.
The tariff classification and trade remedy applicability of a pedal assembly from China.
The tariff classification of parts of a fork-lifting machine from China
The tariff classification of Wheels from China and Sri Lamka
The tariff classification of a snow blade from China
The tariff classification of Off-The-Road Tires from China
The tariff classification of Michelin X Tweels from the United States.
The tariff classification of levers for hydraulic valves
Searching CBP rulings the smart way
TariffLens semantically searches all 200,000+ CBP rulings, surfaces the ones that actually match your product, and builds defensible classifications backed by ruling citations.
Book a demo →