The tariff classification of screws with washers from Japan.
Issued March 12, 2001 by U.S. Customs and Border Protection.
Tariff classification
HTS codes: 7318.15.6060
Headings: 7318
Product description
You have described your samples, part number 949047-8230 and part number 949047-2290, as screws having hexagonal heads, unpointed ends, threaded, and each tightened by torquing its head. They are used to fasten together various automobile parts and components. They are made of iron or steel and will be imported with two washers attached to each fastener. You further state that each fastener will have an M6 designation. However, neither the shank nor the thread will exceed 5.97 mm.
CBP rationale
The applicable subheading for both screw assemblies will be 7318.15.6060, Harmonized Tariff Schedule of the United States (HTS), which provides for screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, (including spring washers) and similar articles of iron or steel: threaded articles: other screws and bolts, whether or not with their nuts or washers: having shanks or threads with a diameter of less than 6 mm: other.
Full text
NY G87524 March 12, 2001 CLA-2-73:RR:NC:1:118 G87524 CATEGORY: Classification TARIFF NO.: 7318.15.6060 Ms. Barbara Dawley Meeks & Sheppard 1735 Post Road Suite 4 Fairfield, CT 06430 RE: The tariff classification of screws with washers from Japan. Dear Ms. Dawley: In your letter dated February 21, 2001, submitted on behalf of your client, Denso Manufacturing Michigan, Inc., located at Battle Creek, Michigan, you requested a tariff classification ruling. You have described your samples, part number 949047-8230 and part number 949047-2290, as screws having hexagonal heads, unpointed ends, threaded, and each tightened by torquing its head. They are used to fasten together various automobile parts and components. They are made of iron or steel and will be imported with two washers attached to each fastener. You further state that each fastener will have an M6 designation. However, neither the shank nor the thread will exceed 5.97 mm. The applicable subheading for both screw assemblies will be 7318.15.6060, Harmonized Tariff Schedule of the United States (HTS), which provides for screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers, (including spring washers) and similar articles of iron or steel: threaded articles: other screws and bolts, whether or not with their nuts or washers: having shanks or threads with a diameter of less than 6 mm: other. The duty rate will be 6.2% ad valorem. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of this ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Kathy Campanelli at 212-637-7025. Sincerely, Robert B. Swierupski Director National Commodity Specialist Division
More rulings on the same tariff codes
The tariff classification of screws and roofing plates from Taiwan.
The tariff classification of steel fasteners from France or Germany.
The tariff classification of threaded fasteners from Taiwan.
The tariff classification of an M4 bolt from Japan.
The tariff classification of fasteners from Taiwan.
The tariff classification of screws and blanks from Taiwan.
The tariff classification of refrigeration compressor parts from Malaysia and Japan.
The tariff classification of a P98 CPU kit from Taiwan
The tariff classification of a stud bolt from Japan and Germany.
The tariff classification of fasteners from Japan.
Searching CBP rulings the smart way
TariffLens semantically searches all 200,000+ CBP rulings, surfaces the ones that actually match your product, and builds defensible classifications backed by ruling citations.
Book a demo →