The tariff classification of rail aligners from France
Issued November 22, 1999 by U.S. Customs and Border Protection.
Tariff classification
HTS codes: 8425.49.0000
Headings: 8425
Product description
With your inquiry you submitted descriptive literature depicting the models CR 57 and CR 61 A-frame aligners. These devices are screw jacks which are used to align the ends of railway track so that the rails can be welded together. The units basically consist of a metal A-frame, tong-like grippers which grip the head of the rail, and screws which are manually turned to lift and position the rail ends. In operation, two units are placed two or three ties down on either side of the joint where welding will take place. Any fasteners holding the rails to the ties are removed so that the rails can be moved more easily. One screw is manually turned in order to raise the rail to a crowned position. Other screws are then manually turned to align the ends of the rails and to eliminate any twist that may exist. Once the proper alignment has been achieved, the welding operation can commence.
CBP rationale
the rails to the ties are removed so that the rails can be moved more easily. One screw is manually turned in order to raise the rail to a crowned position. Other screws are then manually turned to align the ends of the rails and to eliminate any twist that may exist. Once the proper alignment has been achieved, the welding operation can commence. The applicable subheading for the CR 57 and CR 61 aligners will be 8425.49.0000, Harmonized Tariff Schedule of the United States (HTS), which provides for other jacks. The rate of duty will be free.
Full text
NY E89519 November 22, 1999 CLA-2-84:RR:NC:1:103 E89519 CATEGORY: Classification TARIFF NO.: 8425.49.0000 Mr. Lee M. Van Houten Global Fairways, Inc. 6680 Brandt St., Suite 100 Romulus, MI 48174 RE: The tariff classification of rail aligners from France Dear Mr. Van Houten: In your letter dated Oct. 26, 1999 on behalf of Railtech Boutet, Inc. you requested a tariff classification ruling. With your inquiry you submitted descriptive literature depicting the models CR 57 and CR 61 A-frame aligners. These devices are screw jacks which are used to align the ends of railway track so that the rails can be welded together. The units basically consist of a metal A-frame, tong-like grippers which grip the head of the rail, and screws which are manually turned to lift and position the rail ends. In operation, two units are placed two or three ties down on either side of the joint where welding will take place. Any fasteners holding the rails to the ties are removed so that the rails can be moved more easily. One screw is manually turned in order to raise the rail to a crowned position. Other screws are then manually turned to align the ends of the rails and to eliminate any twist that may exist. Once the proper alignment has been achieved, the welding operation can commence. The applicable subheading for the CR 57 and CR 61 aligners will be 8425.49.0000, Harmonized Tariff Schedule of the United States (HTS), which provides for other jacks. The rate of duty will be free. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Alan Horowitz at 212-637-7027. Sincerely, Robert B. Swierupski Director, National Commodity Specialist Division
More rulings on the same tariff codes
The tariff classification of a pump jack and a scaffolding pole from China
The tariff classification of Wheel Dolly Jack from China
The tariff classification of Coremax-2000 Jack Kit from China
The tariff classification of telescopic drive jacks from Switzerland.
The tariff classification of a trailer jack from China
The tariff classification of trailer jacks and related articles from Canada
The tariff classification of a remotely controlled jack from China
The tariff classification of a bicycle storage hoist from Germany
The tariff classification and status under the North American Free Trade Agreement (NAFTA), of an air powered front/rear end lift from Mexico; Article 509
The tariff classification of a pneumatic lift from Mexico
Searching CBP rulings the smart way
TariffLens semantically searches all 200,000+ CBP rulings, surfaces the ones that actually match your product, and builds defensible classifications backed by ruling citations.
Book a demo →