The tariff classification of door jamb, casing and base board moldings from Ghana
Issued May 29, 1997 by U.S. Customs and Border Protection.
Tariff classification
HTS codes: 4418.90.4090, 4409.20.4000
Product description
The ruling was requested on several kinds of moldings made of solid and/or finger-jointed nonconiferous woods such as obeche, ceiba and ofram. They consist of door jamb, casing and base board moldings which are used to hang doors, to case doors and windows and to finish the walls of a room. All of the moldings are continuously shaped to a variety of different patterns. The door jamb moldings may be split or flat. The split jambs consist of two shaped pieces which together make a whole jamb. Both the split jambs and the flat jambs are dadoed or cut out across the ends. The casing moldings will be imported in lengths of 7 feet and the base board moldings in lengths of 16 feet. The casing and base board moldings are square cut or unworked on the ends.
CBP rationale
The applicable subheading for the casing and base board moldings will be 4409.20.4000, Harmonized Tariff Schedule of the United States Annotated (HTSUSA), which provides for wood continuously shaped along any of its edges or faces, whether or not planed, sanded or finger-jointed; nonconiferous; standard wood moldings. The applicable subheading for the split jambs and flat jambs with dadoed ends will be 4418.90.4090, HTSUSA, which provides for other builders' joinery and carpentry of wood.
Full text
NY B85410 May 29, 1997 CLA-2-44:RR:NC:2:230 B85410 CATEGORY: Classification TARIFF NO.: 4409.20.4000; 4418.90.4090 Mr. John Quist Triumph Technologies, Inc. 5850 Beltline Road; Suite 405 Dallas, TX 75240 RE: The tariff classification of door jamb, casing and base board moldings from Ghana Dear Mr. Quist: In your letter dated May 1, 1997 you requested a tariff classification ruling. The ruling was requested on several kinds of moldings made of solid and/or finger-jointed nonconiferous woods such as obeche, ceiba and ofram. They consist of door jamb, casing and base board moldings which are used to hang doors, to case doors and windows and to finish the walls of a room. All of the moldings are continuously shaped to a variety of different patterns. The door jamb moldings may be split or flat. The split jambs consist of two shaped pieces which together make a whole jamb. Both the split jambs and the flat jambs are dadoed or cut out across the ends. The casing moldings will be imported in lengths of 7 feet and the base board moldings in lengths of 16 feet. The casing and base board moldings are square cut or unworked on the ends. The applicable subheading for the casing and base board moldings will be 4409.20.4000, Harmonized Tariff Schedule of the United States Annotated (HTSUSA), which provides for wood continuously shaped along any of its edges or faces, whether or not planed, sanded or finger-jointed; nonconiferous; standard wood moldings. The duty rate will be Free. The applicable subheading for the split jambs and flat jambs with dadoed ends will be 4418.90.4090, HTSUSA, which provides for other builders' joinery and carpentry of wood. The duty rate will be 4 percent ad valorem. Articles classifiable under subheading 4418.90.4090, HTSUSA, which are products of Ghana are entitled to duty free treatment under the Generalized System of Preferences (GSP) upon compliance with all applicable regulations, if the GSP is renewed. (The GSP is scheduled to expire on May 31, 1997.) This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Paul Garretto at 212-466-5779. Sincerely, Gwenn Klein Kirschner Chief, Special Products Branch National Commodity Specialist Division
More rulings on the same tariff codes
The tariff classification of picture frame moldings from Brazil, Italy and China
The tariff classification of profiled door and window trim from Canada
The tariff classification of wooden picture frame moldings with various finishes from Italy
The tariff classification of wood moldings and slats from Canada
The tariff classification of hardwood flooring, moldings, and boards from Australia.
Protest number 5201-01-100970; Wood flooring; Wood products worked or shaped on edges, faces and ends; Application of amendments to Explanatory Notes; Headings 4409 and 4418, HTSUS
Protest number 1704-01-100117; Wood flooring; Wood products worked or shaped on edges, faces and ends; Application of amendments to Explanatory Notes; Headings 4409 and 4418, HTSUS; Laminated flooring; Headings 4412 and 4418
Application for Further Review of Protest Number 3307-99-100031; Wood Flooring; Heading 4412; Heading 4418
Protest number 1101-96-100564; Wood flooring; Wood products worked or shaped on edges, faces and ends; Application of amendments to Explanatory Notes; Headings 4409 and 4418, HTSUS
The tariff classification of solid wood flooring planks from Germany.
Searching CBP rulings the smart way
TariffLens semantically searches all 200,000+ CBP rulings, surfaces the ones that actually match your product, and builds defensible classifications backed by ruling citations.
Book a demo →