The tariff classification of cold drawn steel bars from Canada.
Issued June 28, 1996 by U.S. Customs and Border Protection.
Tariff classification
HTS codes: 7215.50.00
Headings: 7215
Product description
The products to be imported are Grades 1026 and 1035 cold drawn steel bars. Coils of hot-rolled steel bars of circular cross section are produced by a Canadian steel manufacturer, Stelco Inc. and then sent to Canadian Drawn Steel Company (CDS). CDS cold draws the hot-rolled bars through a carbide die which changes the cross-section of the bars into a "Double D" shape, a "flattened circle" or "modified rectangle" of which two opposite sides are convex arcs and the other two opposite sides are straight and parallel to each other. The cold drawn bars are then cut into two different lengths prior to importation into the United States. After importation, the bars are subjected to several types of processing operations: broaching, piercing and vailing the ends; additionally, for one of the two cut lengths of bar, clip grooves and injection molding grooves are turned in the bars. The machined bars/shafts are then ready to be incorporated into automobile steering column assemblies. The cold drawn bars, in their imported condition, meet the legal definition for other bars and rods in Chapter 72 Note 1.(m): "Products...which have a uniform solid cross section along their whole length in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel)...."
CBP rationale
The applicable subheading for the cold drawn nonalloy steel bars will be 7215.50.0060, Harmonized Tariff Schedule of the United States (HTS), which provides for other bars and rods of iron or nonalloy steel, other, not further worked than cold-formed or cold-finished, containing by weight 0.
Full text
NY A83672 June 28, 1996 CLA-2-72:RR:NC:MA:117 A83672 CATEGORY: Classification TARIFF NO.: 7215.50.00 Ms. Maytee Pereira Siegel, Mandell & Davidson One Astor Plaza 1515 Broadway 43rd Floor New York, New York 10036-8901 RE: The tariff classification of cold drawn steel bars from Canada. Dear Ms. Pereira: In your letter dated May 15th on behalf of The Torrington Company, you requested a tariff classification ruling. A representative sample of the product to be imported, along with representative samples of the product in various stages of manufacture, were submitted with your request. The products to be imported are Grades 1026 and 1035 cold drawn steel bars. Coils of hot-rolled steel bars of circular cross section are produced by a Canadian steel manufacturer, Stelco Inc. and then sent to Canadian Drawn Steel Company (CDS). CDS cold draws the hot-rolled bars through a carbide die which changes the cross-section of the bars into a "Double D" shape, a "flattened circle" or "modified rectangle" of which two opposite sides are convex arcs and the other two opposite sides are straight and parallel to each other. The cold drawn bars are then cut into two different lengths prior to importation into the United States. After importation, the bars are subjected to several types of processing operations: broaching, piercing and vailing the ends; additionally, for one of the two cut lengths of bar, clip grooves and injection molding grooves are turned in the bars. The machined bars/shafts are then ready to be incorporated into automobile steering column assemblies. The cold drawn bars, in their imported condition, meet the legal definition for other bars and rods in Chapter 72 Note 1.(m): "Products...which have a uniform solid cross section along their whole length in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel)...." The applicable subheading for the cold drawn nonalloy steel bars will be 7215.50.0060, Harmonized Tariff Schedule of the United States (HTS), which provides for other bars and rods of iron or nonalloy steel, other, not further worked than cold-formed or cold-finished, containing by weight 0.25 percent or more but less than 0.6 percent of carbon. The general rate of duty will be 6 percent ad valorem. This ruling is being issued under the provisions of Part 177 of the Customs Regulations (19 C.F.R. 177). A copy of the ruling or the control number indicated above should be provided with the entry documents filed at the time this merchandise is imported. If you have any questions regarding the ruling, contact National Import Specialist Paula Ilardi at 212-466-5476. Sincerely, Roger J. Silvestri Director National Commodity Specialist Division
More rulings on the same tariff codes
Steel Bars with Chamfered Ends for use as Precision Linear Shafts;
The tariff classification of steel bars from Germany.
The tariff classification of steel bars from various European countries.
The tariff classification of steel channels, beams and flats from various European countries.
NY E86915 and NY E86936 Revoked; Carbon Steel Lug Base
The tariff classification of steel foot posts from the Dominican Republic.
The tariff classification of gear drive systems from South Africa, Hong Kong, Taiwan and Korea
The tariff classification and status under the North American Free Trade Agreement (NAFTA), of steel plate from Canada; Article 509
The tariff classification of steel bars from Canada.
Cold Drawn Steel Rod; Subheading 8708.99.73; Chapter 72,Note 1(m); GRI 2(a); Blanks; General Explanatory Note (II) to GRI2(a); Additional U.S. Rule of Interpretation 1(c); Other Bars andRods of Iron or Nonalloy Steel; Parts and Accessories ofAutomobiles, Parts for Steering Systems; NY A83672, Affirmed.
Searching CBP rulings the smart way
TariffLens semantically searches all 200,000+ CBP rulings, surfaces the ones that actually match your product, and builds defensible classifications backed by ruling citations.
Book a demo →