896607 89 Ruling Active

The tariff classification of an adhesive tape for use in cathode ray tubes, from Japan.

Issued April 13, 1994 by U.S. Customs and Border Protection.

Tariff classification

HTS codes: 3921.90.1500

Headings: 3921

Product description

The manufacturer is Teraoka-Seisaku Corp., Tochigi-Ken, Japan. The shipper is Pioneer Electronics Corporation, Tokyo, Japan. The instant sample, part no. ZTAB758-30, consists of a double sided adhesive tape measuring about 1" in width. The base material of this tape is a nonwoven fabric composed of a blend of 50% rayon man-made fibers and 50% wood pulp, by weight. Both sides of this material have been coated with an acrylic plastics adhesive. The solvent for this adhesive is toluene. The adhesive portion is not believed to comprise over 70 percent by weight of the total weight of the material. This tape, which measures about 0.16mm + 0.03mm in overall thickness, contains a protective paper release on both adhesive surfaces. This tape, which will imported in rolls of 50 meter lengths, is designed to be stuck around the inner side edges of cathode ray tubes and, being double sided adhesive, is to stick a lead band.

CBP rationale

The applicable subheading for the tape will be 3921.90.1500, Harmonized Tariff Schedule of the United States (HTS), which provides for other plates, sheets, film, foil and strip, of plastics, combined with textile materials and weighing not more than 1.

Full text

NY 896607 April 13, 1994 CLA-2-39:S:N:N6:350 896607 CATEGORY: Classification TARIFF NO.: 3921.90.1500 Mr. Wency Villaluz Yusen Air & Sea Service (USA) Inc. 361 North Oak Street Inglewood, CA 90302 RE: The tariff classification of an adhesive tape for use in cathode ray tubes, from Japan. Dear Mr. Villaluz: In your letter dated April 4, 1994, on behalf of Pioneer Electronics Technology, Pomona, California, you requested a classification ruling. The manufacturer is Teraoka-Seisaku Corp., Tochigi-Ken, Japan. The shipper is Pioneer Electronics Corporation, Tokyo, Japan. The instant sample, part no. ZTAB758-30, consists of a double sided adhesive tape measuring about 1" in width. The base material of this tape is a nonwoven fabric composed of a blend of 50% rayon man-made fibers and 50% wood pulp, by weight. Both sides of this material have been coated with an acrylic plastics adhesive. The solvent for this adhesive is toluene. The adhesive portion is not believed to comprise over 70 percent by weight of the total weight of the material. This tape, which measures about 0.16mm + 0.03mm in overall thickness, contains a protective paper release on both adhesive surfaces. This tape, which will imported in rolls of 50 meter lengths, is designed to be stuck around the inner side edges of cathode ray tubes and, being double sided adhesive, is to stick a lead band. The applicable subheading for the tape will be 3921.90.1500, Harmonized Tariff Schedule of the United States (HTS), which provides for other plates, sheets, film, foil and strip, of plastics, combined with textile materials and weighing not more than 1.492kg per square meter, products with textile components in which man-made fibers predominate by weight over any other single textile fiber, not over 70 percent by weight of plastics. The duty rate will be 8.5 percent ad valorem. This merchandise falls within textile category designation 229. Based upon international textile trade agreements, products of Japan are subject to the requirement of a visa. The designated textile and apparel category may be subdivided into parts. If so, visa and quota requirements applicable to the subject merchandise may be affected. Since part categories are the result of international bilateral agreements which are subject to frequent renegotiations and changes, to obtain the most current information available, we suggest that you check, close to the time of shipment, the Status Report on Current Import Quotas (Restraint Levels), an internal issuance of the U.S. Customs Service, which is available for inspection at your local Customs office. This ruling is being issued under the provisions of Section 177 of the Customs Regulations (19 C.F.R. 177). A copy of this ruling letter should be attached to the entry documents filed at the time this merchandise is imported. If the documents have been filed without a copy, this ruling should be brought to the attention of the Customs officer handling the transaction. Sincerely, Jean F. Maguire Area Director New York Seaport

View original on CBP CROSS →

More rulings on the same tariff codes

Searching CBP rulings the smart way

TariffLens semantically searches all 200,000+ CBP rulings, surfaces the ones that actually match your product, and builds defensible classifications backed by ruling citations.

Book a demo →