The tariff classification of plastic-laminated wood fiberboard flooring from Norway.
Issued February 25, 1994 by U.S. Customs and Border Protection.
Tariff classification
HTS codes: 4411.19.4000
Headings: 4411
Product description
It is a section of a wood fiberboard plank, tongued and grooved along its edges, measuring about 7 mm in thickness. The top and bottom surfaces are covered with a thin layer of plastic, with the top surface also incorporating a decorative wood-grain pattern, possibly printed on paper. You advise that the fiberboard used to make the product has a density of 1.29 grams per cubic centimeter.
CBP rationale
The applicable subheading for the above-described flooring will be 4411.19.4000, Harmonized Tariff Schedule of the United States (HTS), which provides for other (than certain enumerated) fiberboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances, of a density exceeding 0.
Full text
NY 894533 February 25, 1994 CLA-2-44:S:N:N8:230 894533 CATEGORY: Classification TARIFF NO.: 4411.19.4000 Mr. L. Klestadt Trans-World Shipping Corp. 53 Park Place New York, N.Y. 10007 RE: The tariff classification of plastic-laminated wood fiberboard flooring from Norway. Dear Mr. Klestadt: In your letters dated January 3 and 28, 1994, on behalf of Boen Hardwood Flooring, Inc. (Bassett, VA), you requested a tariff classification ruling. A sample of an item described as plastic-laminated fiberboard flooring was submitted and will be retained for reference. It is a section of a wood fiberboard plank, tongued and grooved along its edges, measuring about 7 mm in thickness. The top and bottom surfaces are covered with a thin layer of plastic, with the top surface also incorporating a decorative wood-grain pattern, possibly printed on paper. You advise that the fiberboard used to make the product has a density of 1.29 grams per cubic centimeter. The applicable subheading for the above-described flooring will be 4411.19.4000, Harmonized Tariff Schedule of the United States (HTS), which provides for other (than certain enumerated) fiberboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances, of a density exceeding 0.8 grams per cubic centimeter. The rate of duty will be 6%. This ruling is being issued under the provisions of Section 177 of the Customs Regulations (19 C.F.R. 177). A copy of this ruling letter should be attached to the entry documents filed at the time this merchandise is imported. If the documents have been filed without a copy, this ruling should be brought to the attention of the Customs officer handling the transaction. Sincerely, Jean F. Maguire Area Director New York Seaport
More rulings on the same tariff codes
Application for Further Review of Protest Number 1703-02-100124; Fiberboard Flooring and Molding; Subheading 4411.19.4000; Subheading 4411.29.9000
Protest Number 1001-99-101893
The tariff classification of molded wood fiberboard door face panels (door skins) from Australia.
The tariff classification of fiberboard from Russia and Slovakia.
The tariff classification of fiberboard composite panels from BrazilDear Mr. Monck:
The tariff classification of wood moldings from Italy.
Protest number 3001-96-100323; fiberboard flooring;subheading 4411.19.4000; tileboard; subheading 4411.19.3000
The tariff classification of Eucatex board from Brazil.
The tariff classification of a high density wood fiberboard floor covering with a printed laminated finish from Italy
The tariff classification of laminated wood fiberboard flooring from Germany.
Searching CBP rulings the smart way
TariffLens semantically searches all 200,000+ CBP rulings, surfaces the ones that actually match your product, and builds defensible classifications backed by ruling citations.
Book a demo →