The tariff classification of an assembly machine from Japan
Issued May 10, 1990 by U.S. Customs and Border Protection.
Tariff classification
HTS codes: 8479.89.9090
Headings: 8479
Product description
The tariff classification of an assembly machine from Japan
CBP rationale
The applicable subheading for the SMT-8800 assembly machine will be 8479.89.9090, Harmonized Tariff Schedule of the United States (HTS), which provides for other machines and mechanical appliances having individual functions, not specified or included elsewhere.
Full text
NY 852183 MAY 10 1990 CLA-2-84:S:N:N1:103 852183 CATEGORY: Classification TARIFF NO.: 8479.89.9090 Ms. Angela Sharman John A. Steer Co. 28 South Second Street Philadelphia, Pa. 19106 RE: The tariff classification of an assembly machine from Japan Dear Ms. Sharman: In your letter on behalf of Henry Mann, Inc. which was received by this office on May 4, 1990 you requested a tariff classification ruling. The SMT-8800 is an automatic pick and place assembly machine used to insert surface mounted electrical components onto printed circuit boards. Assembly routines can be programmed into the SMT-8800 by downloading component co-ordinates from a separate personal computer, by means of the unit's hand-held programming keyboard, or by having the operator guide the machine through an assembly routine that is then stored on a hard or floppy disk. Utilizing four vacuum pickups, the machine can automatically rotate resistors, capacitors and similar surface mount electrical components 90, 180, or 270 degrees, as needed, and then place them onto the printed circuit board. A built-in syringe dispenser mounted beside the pickup head dispenses either solder paste or adhesive epoxy. A sensor located on the head checks for markings that indicate an electrically defective board, causing the machine to skip over such boards. The SMT-8800 can hold surface mount devices stored on as many as 30 tape feeders and 24 stick feeders, and can assemble up to 1600 parts per hour. The applicable subheading for the SMT-8800 assembly machine will be 8479.89.9090, Harmonized Tariff Schedule of the United States (HTS), which provides for other machines and mechanical appliances having individual functions, not specified or included elsewhere. The rate of duty will be 3.7 percent ad valorem. This ruling is being issued under the provisions of Section 177 of the Customs Regulations (19 C.F.R. 177). A copy of this ruling letter should be attached to the entry documents filed at the time this merchandise is imported. If the documents have been filed without a copy, this ruling should be brought to the attention of the Customs officer handling the transaction. Sincerely, Jean F. Maguire Area Director New York Seaport
More rulings on the same tariff codes
The tariff classification of resin dryers and loaders fromCanada.
The tariff classification of an oil filter crusher fromCanada
The tariff classification of flower processing machines fromHolland
The tariff classification of a vacuum coating machine fromGermany
The tariff classification of a bow or stern thruster fromFrance
The tariff classification of a joiner-tightener and wirerope from Canada
The tariff classification of an electronic pipette fromFinland
The tariff classification of armature and statormanufacturing machines from Italy
The tariff classification of armature and statormanufacturing machines from Italy
The tariff classification of armature and statormanufacturing machines from Italy
Searching CBP rulings the smart way
TariffLens semantically searches all 200,000+ CBP rulings, surfaces the ones that actually match your product, and builds defensible classifications backed by ruling citations.
Book a demo →