Ruling Request; International Golf Warehouse; Seal
Issued August 6, 1996 by U.S. Customs and Border Protection.
Tariff classification
Product description
Your correspondence included as a sample a metal golf club head, a 6 iron. The plate is slightly curved containing the number "6". The surface of the head is polished chrome, except for the strike area on the face of the club, which appears to be a sandblasted finish and the cavity on the back of the club which also appears to be sandblasted. Running horizontally across the sandblasted area of the strike face are horizontal grooves. The bottom groove is yellow. The number "6" appears on the top left portion of the strike face. The back of the club is formed by a cavity which appears to have been sandblasted. Within the cavity, there appears the mark "seal". The "s" is stylized, resembling a backward "z". The "e" is stylized, resembling an upside down, backward "a". To the left of the "seal" mark appears in yellow outline a four pointed crown above a shied containing an "S" interwoven above an "L". The "seal" mark and the "SL and Design" mark appear within a graded oval perimeter. Within the cavity, outside the oval perimeter, appears the mark "SL 201". The club hosel is offset from the blade.
CBP rationale
A mark is considered infringing upon a registered trademark, pursuant to 15 U.S.C. 1114, where it is "likely to cause confusion, or to cause mistake, or to deceive." A review of the trademarks recorded with Customs did not reveal any marks which would be infringed by the marks on the submitted sample. Additionally, our review of the trademarks registered with the Patent and Trademark Office, Trademark Registration Information File revealed no registered trademarks for "seal" , "zeal", or "SL and Design" relating to golf merchandise.
Full text
August 6, 1996 HQ 462465 IT:IP:RR 462465 MS CATEGORY: Trademark Mauricio Hodgson Import Supervisor Priority One International 3419 Trentwood Blvd Orlando, Florida 32812 RE: Ruling Request; International Golf Warehouse; Seal Dear Mr. Hodgson: This is in response to your request dated July 22, 1996, for a binding ruling under 19 CFR 177.1(a)(1), regarding certain merchandise bearing the marks "seal" or "SL and Design". FACTS: Your correspondence included as a sample a metal golf club head, a 6 iron. The plate is slightly curved containing the number "6". The surface of the head is polished chrome, except for the strike area on the face of the club, which appears to be a sandblasted finish and the cavity on the back of the club which also appears to be sandblasted. Running horizontally across the sandblasted area of the strike face are horizontal grooves. The bottom groove is yellow. The number "6" appears on the top left portion of the strike face. The back of the club is formed by a cavity which appears to have been sandblasted. Within the cavity, there appears the mark "seal". The "s" is stylized, resembling a backward "z". The "e" is stylized, resembling an upside down, backward "a". To the left of the "seal" mark appears in yellow outline a four pointed crown above a shied containing an "S" interwoven above an "L". The "seal" mark and the "SL and Design" mark appear within a graded oval perimeter. Within the cavity, outside the oval perimeter, appears the mark "SL 201". The club hosel is offset from the blade. ISSUE: Do the marks "seal", "zeal" or "SL and Design" on the submitted golf iron head infringe on any registered and recorded trademark. - 2 - LAW AND ANALYSIS: A mark is considered infringing upon a registered trademark, pursuant to 15 U.S.C. 1114, where it is "likely to cause confusion, or to cause mistake, or to deceive." A review of the trademarks recorded with Customs did not reveal any marks which would be infringed by the marks on the submitted sample. Additionally, our review of the trademarks registered with the Patent and Trademark Office, Trademark Registration Information File revealed no registered trademarks for "seal" , "zeal", or "SL and Design" relating to golf merchandise. HOLDING: Based on the above, we conclude that the marks do not infringe on any registered or recorded marks currently being enforced by Customs. Sincerely, John F. Atwood, Chief Intellectual Property Rights Branch
More rulings on the same tariff codes
Country of origin determination for decorative pillow; 19 CFR 102.21(c)(2); tariff shift
Country of origin determination for decorative pillows; 19 CFR 102.21(c)(2); tariff shift
Country of origin determination for a faux rabbit fur pillow; 19 CFR 102.21(c)(2); tariff shift
Country of origin determination for a faux rabbit fur throw; 19 CFR 102.21(c)(5); last country where an important assembly or manufacturing process occurred
The country of origin of a fracking unit
Country of origin determination for a sheet set and comforter; 19 CFR 102.21(c)(2); tariff shift; 19 CFR 102.21(c)(4); most important assembly or manufacturing process; 19 CFR 102.13; De Minimis
Country of origin determination for duvet covers, pillow shams and quilts; 19 CFR 102.21(c)(2); tariff shift; 19 CFR 102.21(c)(4); most important assembly or manufacturing process
Country of origin determination for a coir mat; 19 CFR 102.21(c)(1); wholly obtained or produced in a single country
Country of origin and marking determination for cotton woven gauze fabric; 19 CFR 102.21(c)(2)
The country of origin of two bandage fabrics; 19 CFR 102.21(c)(2), tariff shift; 19 CFR 102.21(c)(4)
Searching CBP rulings the smart way
TariffLens semantically searches all 200,000+ CBP rulings, surfaces the ones that actually match your product, and builds defensible classifications backed by ruling citations.
Book a demo →