HEADING 4412

Plywood, veneered panels and similar laminated wood:

Part of Chapter 44 — Wood and Articles of Wood, Section IX.

Subheadings and tariff lines

4412.10Of bamboo: 4412.10.05.00Plywood 4412.10.90.00Other
4412D01Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness:
4412.31With at least one outer ply of tropical wood:
4412.31D02Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply:
4412.31.06With a face ply of birch (Betula spp.) 4412.31.06.20Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length
4412.31.06D03Other:
4412.31.06.40Not surface covered 4412.31.06.60Other 4412.31.26With a face ply of Spanish cedar (Cedrela spp.) or walnut (Juglans spp) 4412.31.26.10With a face ply of Spanish cedar (Cedrela spp.) 4412.31.26.20With a face ply of walnut (Juglans spp.)
4412.31D04Other:
4412.31.26D05With at least one outer ply of the following tropical woods: Dark Red Meranti, Light Red Meranti, White Lauan, Sipo, Limba, Okoumé, Obeche, Acajou d'Afrique, Sapelli, Virola, Mahogany, Palissandre de Para, Palissandre de Rio or Palissandre de Rose:
4412.31.42.00With a face ply of mahogany (Swietenia spp. or Khaya spp.) 4412.31.45.00Panels not exceeding 3.6 mm in thickness and exceeding 1.2 m in width and 2.2 m in length 4412.31.48Other 4412.31.48.50Panels not exceeding 3.6 mm in thickness and not exceeding 1.2 m in width and 2.2 m in length
4412.31.48D06Other:
4412.31.48.50D07Not surface covered:
4412.31.48.60Dark Red Meranti, Light Red Meranti or White Lauan (Luan) (Shorea spp.) 4412.31.48.63Limba (Terminalia spp.), also known as Terminalia and Nargusta 4412.31.48.66Virola (Virola spp.) 4412.31.48.69Other
4412.31.48.50D08Other:
4412.31.48.75Wood flooring 4412.31.48.80Other 4412.31.52Other 4412.31.52.25Wood flooring
4412.31.52D09Other:
4412.31.52.35With a face ply of sen (Kalopanax spp.)
4412.31.52.25D10Other:
4412.31.52.55Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length
4412.31.52.35D11Other:
4412.31.52.55D12Not surface covered:
4412.31.52.60Albizia (Albizia spp.), also known as Falcata, Batai and Suar wood 4412.31.52.62Bintangor (Calophyllum spp.) 4412.31.52.64Mersawa (Anisoptera spp.) 4412.31.52.66Parica (Schizolobium spp.), also known as Pinho Cuiabano, Firetree and Guapuruvu 4412.31.52.68Pencil cedar, Nyatoh (Palaquium spp.) 4412.31.52.70Other 4412.31.52.75Other
4412.31D13Other:
4412.31.61.00With at least one outer ply of the following tropical woods: Dark Red Meranti, Light Red Meranti, White Lauan, Sipo, Limba, Okoumé, Obeche, Acajou d'Afrique, Sapelli, Virola, Mahogany, Palissandre de Para, Palissandre de Rio or Palissandre de Rose 4412.31.92.00Other 4412.33Other, with at least one outer ply of nonconiferous wood of the species alder (Alnus spp.), ash (Fraxinus spp.), beech (Fagus spp.), birch (Betula spp.), cherry (Prunus spp.), chestnut (Castanea spp.), elm (Ulmus spp.), eucalyptus (Eucalyptus spp.), hickory (Carya spp.), horse chestnut (Aesculus spp.), lime (Tilia spp.), maple (Acer spp.), oak (Quercus spp.), plane tree (Platanus spp.), poplar and aspen (Populus spp.), robinia (Robinia spp.), tulipwood (Liriodendron spp.) or walnut (Juglans spp.):
4412.33D14Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply:
4412.33.06With a face ply of birch (Betula spp.) 4412.33.06.20Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length
4412.33.06D15Other:
4412.33.06.40Not surface covered
4412.33.06.20D16Other:
4412.33.06.65Wood flooring 4412.33.06.70Other 4412.33.26With a face ply of walnut (Juglans spp.) 4412.33.26.25Wood flooring 4412.33.26.30Other 4412.33.32Other 4412.33.32.25Wood flooring
4412.33.32D17Other:
4412.33.32.35With a face ply of sen (Kalopanax spp.) 4412.33.32.55With a face ply of mahogany (Swietenia spp. or Khaya spp.)
4412.33.32.25D18Other:
4412.33.32.65Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length
4412.33.32.55D19Other:
4412.33.32.75Not surface covered 4412.33.32.85Other 4412.33.57.00Other 4412.34Other, with at least one outer ply of nonconiferous wood not specified under subheading 4412.33:
4412.34D20Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply:
4412.34.26.00With a face ply of Spanish cedar (Cedrela spp.) 4412.34.32Other 4412.34.32.25Wood flooring
4412.34.32D21Other:
4412.34.32.35With a face ply of sen (Kalopanax spp.) 4412.34.32.55With a face ply of mahogany (Swietenia spp. or Khaya spp.)
4412.34.32.25D22Other:
4412.34.32.65Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length
4412.34.32.55D23Other:
4412.34.32.75Not surface covered 4412.34.32.85Other 4412.34.57.00Other 4412.39Other, with both outer plies of coniferous wood:
4412.39D24Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply:
4412.39.10.00With a face ply of Parana pine (Araucaria angustifolia) 4412.39.30.00With a face ply of European red pine (Pinus silvestris) 4412.39.40Other
4412.39.40D25With at least one outer ply of Douglas fir (Pseudotsuga menziesii):
4412.39.40.11Rough, or touch sanded for sizing purposes, but not further processed 4412.39.40.12Fully sanded on at least one face, but not further processed 4412.39.40.19Other
4412.39.40D26With at least one outer ply of long leaf pine (Pinus palustris), short leaf pine (Pinus echinata), southern yellow pine (loblolly pine)(Pinus taeda), slash pine (Pinus elliotti), pitch pine (Pinus rigida) or Virginia pine (Pinus virginiana):
4412.39.40.31Rough, or touch sanded for sizing purposes, but not further processed 4412.39.40.32Fully sanded on at least one face, but not further processed 4412.39.40.39Other
4412.39.40D27With at least one outer ply of Agathis spp.:
4412.39.40.51Rough, or touch sanded for sizing purposes, but not further processed 4412.39.40.52Fully sanded on at least one face, but not further processed 4412.39.40.59Other
4412.39.40D28Other:
4412.39.40.61Rough, or touch sanded for sizing purposes, but not further processed 4412.39.40.62Fully sanded on at least one face, but not further processed 4412.39.40.69Other 4412.39.50Other 4412.39.50.10With at least one outer ply of Douglas fir (Pseudotsuga menziesii) 4412.39.50.30With at least one outer ply of long leaf pine (Pinus palustris), short leaf pine (Pinus echinata), southern yellow pine (loblolly pine) (Pinus taeda), slash pine (Pinus elliotti), pitch pine (Pinus rigida) or Virginia pine (Pinus virginiana) 4412.39.50.50Other
4412D29Laminated veneered lumber (LVL):
4412.41.00.00With at least one outer ply of tropical wood 4412.42.00.00Other, with at least one outer ply of nonconiferous wood 4412.49.00.00Other, with both outer plies of coniferous wood
4412D30Blockboard, laminboard and battenboard:
4412.51With at least one outer ply of tropical wood:
4412.51D31Plywood:
4412.51D32Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply:
4412.51.10With a face ply of birch (Betula spp.) 4412.51.10.30Not surface covered 4412.51.10.50Other 4412.51.31Other 4412.51.31.05Wood flooring
4412.51.31D33Other:
4412.51.31.11With a face ply of Spanish cedar (Cedrela spp.) 4412.51.31.21With a face ply of walnut (Juglans spp.) 4412.51.31.41With a face ply of mahogany (Swietenia spp. or Khaya spp.)
4412.51.31.05D34Other:
4412.51.31.61Not surface covered 4412.51.31.75Other 4412.51.41.00Other 4412.51.51.00Other 4412.52Other, with at least one outer ply of nonconiferous wood:
4412.52D35Plywood:
4412.52D36Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply:
4412.52.10With a face ply of birch (Betula spp.) 4412.52.10.30Not surface covered 4412.52.10.50Other 4412.52.31Other 4412.52.31.05Wood flooring
4412.52.31D37Other:
4412.52.31.21With a face ply of walnut (Juglans spp.)
4412.52.31.05D38Other:
4412.52.31.61Not surface covered 4412.52.31.75Other 4412.52.41.00Other 4412.52.51.00Other 4412.59Other, with both outer plies of coniferous wood:
4412.59D39Plywood:
4412.59D40Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply:
4412.59.60.00With a face ply of Parana pine (Araucaria angustifolia) 4412.59.70.00With a face ply of European red pine (Pinus silvestris) 4412.59.80.00Other 4412.59.90.00Other 4412.59.95.00Other
4412D41Other:
4412.91With at least one outer ply of tropical wood: 4412.91.06.00Containing at least one layer of particle board
4412.91D42Other:
4412.91.06.00D43Plywood:
4412.91.06.00D44Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply:
4412.91.10With a face ply of birch (Betula spp.) 4412.91.10.20Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length
4412.91.10D45Other:
4412.91.10.30Not surface covered 4412.91.10.40Other 4412.91.31Other 4412.91.31.10With a face ply of Spanish cedar (Cedrela spp.) 4412.91.31.20With a face ply of walnut (Juglans spp.) 4412.91.31.30With a face ply of sen (Kalopanax spp.) 4412.91.31.40With a face ply of mahogany (Swietenia spp. or Khaya spp.)
4412.91.31D46Other:
4412.91.31.50Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width, and 2.2 m in length 4412.91.31.60Other, not surface covered 4412.91.31.70Other 4412.91.41.00Other 4412.91.51Other 4412.91.51.05Wood flooring 4412.91.51.15Other 4412.92Other, with at least one outer ply of nonconiferous wood: 4412.92.07.00Containing at least one layer of particle board
4412.92D47Other:
4412.92.07.00D48Plywood:
4412.92.07.00D49Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply:
4412.92.11With a face ply of birch (Betula spp.) 4412.92.11.20Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length
4412.92.11D50Other:
4412.92.11.30Not surface covered 4412.92.11.40Other 4412.92.31Other 4412.92.31.20With a face ply of walnut (Juglans spp.)
4412.92.31D51Other:
4412.92.31.50Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width, and 2.2 m in length 4412.92.31.60Other, not surface covered 4412.92.31.70Other 4412.92.42.00Other 4412.92.52Other 4412.92.52.05Wood flooring 4412.92.52.15Other 4412.99Other, with both outer plies of coniferous wood: 4412.99.58.00Containing at least one layer of particle board
4412.99D52Other:
4412.99.58.00D53Plywood:
4412.99.58.00D54Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply:
4412.99.61.00With a face ply of Parana pine (Araucaria angustifolia) 4412.99.71.00With a face ply of European red pine (Pinus silvestris) 4412.99.81.00Other 4412.99.91.00Other 4412.99.97.00Other

Recent CBP rulings on heading 4412

Classifying products under 4412?

TariffLens picks the right 10-digit code with GRI reasoning and cited rulings.

Book a demo →