Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils:

2710.12Light oils and preparations: 2710.12.15Motor fuel 2710.12.15.10Leaded 2710.12.15.14Reformulated 2710.12.15.19Other 2710.12.15.20Jet fuel, naphtha-type 2710.12.15.50Other 2710.12.18Motor fuel blending stock 2710.12.18.05Reformulated blendstock for oxygenate blending (RBOB) 2710.12.18.90Other 2710.12.25.00Naphthas (except motor fuel or motor fuel blending stock) 2710.12.45Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound 2710.12.45.45Insulating or transformer oils 2710.12.45.60Renewable fuels blends containing not less than 51 percent by volume of biofuel, as described in statistical note 1 to this chapter 2710.12.45.95Other 2710.12.90.00Other 2710.19Other: 2710.19.06Testing under 25 degrees A.P.I. 2710.19.06.05Containing not more than 500 ppm of sulfur 2710.19.06.15Containing more than 500 ppm of sulfur 2710.19.06.25Fuel oil No. 5 2710.19.06.30Fuel oil No. 6 2710.19.06.35Other 2710.19.06.50Other 2710.19.11Testing 25 degrees A.P.I. or more 2710.19.11.02Containing not more than 15 ppm of sulfur 2710.19.11.03Containing more than 15 ppm but not more than 500 ppm of sulfur 2710.19.11.04Containing more than 500 ppm of sulfur 2710.19.11.05Containing not more than 15 ppm of sulfur 2710.19.11.07Containing more than 15 ppm but not more than 500 ppm of sulfur 2710.19.11.08Containing more than 500 ppm of sulfur 2710.19.11.11Containing not more than 15 ppm of sulfur 2710.19.11.13Containing more than 15 ppm but not more than 500 ppm of sulfur 2710.19.11.14Containing more than 500 ppm of sulfur 2710.19.11.15Containing not more than 500 ppm of sulfur 2710.19.11.25Containing more than 500 ppm of sulfur 2710.19.11.50Having a Saybolt Universal viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils) 2710.19.16.00Kerosene-type jet fuel 2710.19.24.00Motor fuel 2710.19.25.00Motor fuel blending stock 2710.19.26.00Kerosene (except kerosene-type jet fuel 2710.19.30Oils 2710.19.30.10Aviation engine lubricating oils 2710.19.30.20Automotive, diesel or marine engine lubricating oils 2710.19.30.30Turbine lubricating oil, including marine 2710.19.30.40Automotive gear oils 2710.19.30.50Steam cylinder oils 2710.19.30.70Quenching or cutting oils 2710.19.30.80Other 2710.19.35.00Containing not over 10 percent by weight of salts of fatty acids of animal (including marine animal) or vegetable origin 2710.19.40.00Other 2710.19.45Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound 2710.19.45.30Medicinal grade 2710.19.45.40Other 2710.19.45.45Insulating or transformer oils 2710.19.45.90Other 2710.19.90.00Other 2710.20Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, containing biodiesel, other than waste oils: 2710.20.05Testing under 25 degrees A.P.I. 2710.20.05.10Having a Saybolt Universal viscosity at 37.8˚C of 45 seconds or more but not more than 125 seconds (No. 4-type fuel oils) 2710.20.05.20Having a Saybolt Universal viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils) 2710.20.05.50Other 2710.20.10Testing 25 degrees A.P.I. or more 2710.20.10.02Containing not more than 15 ppm of sulfur 2710.20.10.03Containing more than 15 ppm but not more than 500 ppm of sulfur 2710.20.10.04Containing more than 500 ppm of sulfur 2710.20.10.05Containing not more than 15 ppm of sulfur 2710.20.10.07Containing more than 15 ppm but not more than 500 ppm of sulfur 2710.20.10.08Containing more than 500 ppm of sulfur 2710.20.10.11Containing not more than 15 ppm of sulfur 2710.20.10.13Containing more than 15 ppm but not more than 500 ppm of sulfur 2710.20.10.14Containing more than 500 ppm of sulfur 2710.20.10.15Containing not more than 500 ppm of sulfur 2710.20.10.25Containing more than 500 ppm of sulfur 2710.20.10.50Having a Saybolt Universal viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils) 2710.20.15.00Kerosene-type jet fuel, motor fuel or motor fuel blending stock 2710.20.25.00Kerosene (except kerosene-type jet fuel, motor fuel or motor fuel blending stock) 2710.91.00Containing polychlorinated biphenyls (PCBs), polychlorinated terphenyls (PCTs) or polybrominated biphenyls (PBBs) 2710.91.00.10Containing polychlorinated biphenyls (PCBs) at a concentration level of 50 mg/kg or more 2710.91.00.50Other, containing polychlorinated terphenyls (PCTs) or polybrominated biphenyls (PBBs), whether or not also containing polychlorinated biphenyls (PCBs) at a concentration level of less than 50 mg/kg 2710.99Other: 2710.99.05.00Testing under 25 degrees A.P.I. 2710.99.10.00Testing 25 degrees A.P.I. or more 2710.99.16.00Wastes of motor fuel or of motor fuel blending stock 2710.99.21.00Wastes of kerosene or naphthas 2710.99.31.00Of oils 2710.99.32.00Containing not over 10 percent by weight of salts of fatty acids of animal (including marine animal) or vegetable origin 2710.99.39.00Other 2710.99.45.00Mixtures of hydrocarbons not elsewhere specified or included, which contain not over 50 percent of any single hydrocarbon compound 2710.99.90.00Other