9109.90.20.00
Measuring not over 50 mm in width or diameter
Clock movements, complete and assembled: Other
Duty rates
Column 1 (General / MFN)
20¢ each
Column 2 (Non-NTR)
75¢ each
Column 1 (Special / FTA)
Free
Eligible
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.88.15
LIST_3
The duty provided in the applicable subheading + 7.5%
Except as provided in headings 9903.88.39, 9903.88.42, 9903.88.44, 9903.88.47, 9903.88.49, 9903.88.51, 9903.88.53, 9903.88.55, 9903.88.57, 9903.88.65, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(r) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(s)
Applies to origin: CN
Effective from September 24, 2018
Related CBP rulings
The tariff classification and country of origin marking for a clock insert, clock fitup and clock movement; special marking requirements; Additional U.S. Note 4, Chapter 91, HTSUS
The submitted item identified in your letter as a clock insert contains a battery operated quartz analog clock movement. There are no jewels in the movement. The clock insert measures approximately 3 inches in height, 1 inch in width and 3
The tariff classification of a clock fitup, alarm clock and pendulum clock movement
The submitted clock fitup, Model Number 2003, contains a quartz analog, battery powered clock movement made in China. There are no jewels in the movement. The fitup is assembled with a round dial and hour, minute and second hands. The fitup
The tariff classification of clock movements from China
The product is a quartz movement with no (0) jewels. It consists of the quartz movement in a plastic housing, the hour and minute hands and a metal hanger. It will be imported for use in a clock. In your letter you have stated that the move
The tariff classification of clock movements from Hong Kong
The quartz clock movement, Product No. 15708, will be imported from Hong Kong. It consists of the 2 1/8 inch square quartz clock movement along with the hour hand, the minute hand, a rubber washer, a brass nut, an end cap and a metal hanger
The tariff classification of clock movements from China
The clock movement will be combined with a bell, a face, and a dial and will function as a long ring bell timer in various appliances or as a kitchen bell timer. The clock movement will not be imported with the striker arm, which strikes th
The tariff classification of clock movements from Japan
The clock movement, model TA-07, is electrically operated and consists of a printed circuit board, an electromagnet, and a gear set, all of which are set into a plastic carrier which is attached to a plastic housing. The clock movement is v
The country of origin marking requirements for fittings from Taiwan.
The country of origin marking requirements for fittings from Taiwan.
The tariff classification and marking of a plastic dial, plastic housing and a timer movement from China.
You have submitted items which will be imported separately as parts. The parts consist of a plastic dial, plastic housing and a clock movement. The components will be assembled into timers when fully imported.
The tariff classification of a clock movement from Hong Kong
You have submitted a sample of part number WT-2115, 148 008 200 01, an opto-electronic clock movement with LED display. The movement will be re-wired, enclosed in a plastic housing, attached to an AC cord and used as an alarm clock, with ti
The tariff classification of a quartz analog clock movement from China.
The submitted sample, part #8044505001, is a quartz analog clock movement, including minute, hour and second hands and a lock nut.
The tariff classification of a quartz analog clock movement from Taiwan.
The submitted sample is a battery operated quartz analog clock movement measuring over 50 mm in width or diameter.
The tariff classification of a quartz analog clock movementfrom Taiwan.
The tariff classification of a quartz analog clock movementfrom Taiwan.
Other codes in heading 9109
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 9109.90.20.00 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →