8482.10.50.36
Under 9 mm
Ball or roller bearings, and parts thereof: Ball bearings: Other: Other: Radial bearings: Single row bearings: Other bearings, having an outside diameter of
Data provenance: Rates from HTS Revision 19 (Sep 16, 2026); trade measures verified against CBP CSMS and Federal Register notices through Sep 3, 2026.
Duty rates
No active duty rates published for this code.
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.82.03
15.0%
ActiveExcept for articles classifiable in chapters 72, 73, 74 or 76, articles where the weight of the applicable metal is less than 15 percent of the weight of the imported article, as provided for in subdivision (c) of U.S. note 16 to this subchapter
Effective from April 6, 2026
9903.82.05
The duty provided in the applicable subheading + 15%
ActiveDerivative aluminum or steel articles the product of the United Kingdom, as provided for in subdivisions (c)(vi)–(vii) and (d) of U.S. note 16 to this subchapter
Applies to origin: GB
Effective from April 6, 2026
9903.82.06
The duty provided in the applicable subheading + 10%
ActiveExcept as provided for in headings 9903.82.15 and 9903.85.68, articles of copper and derivative aluminum and steel articles, as provided for in subdivisions (c)(ii), (iv), (vi)–(viii), (xi) and (e) of U.S. note 16 to this subchapter
Effective from April 6, 2026
9903.82.09
The duty provided in the applicable subheading + 25%
ActiveExcept as provided for in headings 9903.82.16, 9903.82.20–9903.82.26 and 9903.85.68, articles of copper and derivative aluminum and steel articles, as provided for in subdivisions (c)(vi)–(viii) and (xi) of U.S. note 16 to this subchapter
Effective from April 6, 2026
9903.82.13
No change
ActiveMotorcycle parts, as provided for in subdivision (g) of U.S. note 16 to the subchapter
Effective from April 6, 2026
9903.82.15
The duty provided in the applicable subheading + 10%
ActiveArticles of copper and derivative steel the product of the Russian Federation, as provided for in subdivisions (c)(iv), (vii), (viii), (xi) and (e) of U.S. note 16 to this subchapter
Applies to origin: RU
Effective from April 6, 2026
9903.82.16
The duty provided in the applicable subheading + 25%
ActiveArticles of copper and derivative steel the product of the Russian Federation, as provided for in subdivisions (c)(vii)–(viii) and (xi) of U.S. note 16 to this subchapter
Applies to origin: RU
Effective from April 6, 2026
9903.88.01
LIST_1
The duty provided in the applicable subheading plus 25%
ActiveExcept as provided in headings 9903.88.05, 9903.88.06, 9903.88.07, 9903.88.08, 9903.88.10, 9903.88.11, 9903.88.14, 9903.88.19, 9903.88.50, 9903.88.52, 9903.88.58, 9903.88.60, 9903.88.62, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(a) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(b) [to this subchapter]
Applies to origin: CN
Effective from July 6, 2018
Rate-change history
What the rate was before, and when it changed. The government schedule replaces each revision in place; we keep the timeline.
-
RATE_INCREASE USITC HTS Revision 2026.7
Rate increase on 9903.82.03: 0% → 15% (Section 232 combined metals)
See the change → -
SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals
Section 232 steel scope expanded: 523 HTS codes added under combined-metals framework
See the change → -
NEW_PROGRAM Proclamation April 2, 2026 - Combined Metals
Combined Section 232 metals framework introduced — 16 new Chapter 99 codes (9903.82.02–17)
See the change → -
NEW_PROGRAM Executive Order Feb 1, 2026 — Reciprocal Tariff (FR 2026-03824)
Section 122 reciprocal surcharge in effect — additional 10% on most imports through July 24, 2026
See the change →
Related CBP rulings
The tariff classification of bearing steel balls from Japan
The products under consideration are bearing steel balls. Each ball is polished, weighs 10.02 grams and is constructed of SUJ2 graded steel. The balls are designed to be used in bearings that minimize friction in steering columns, wheel hub
The country of origin and USMCA eligibility of bearings
part numbers HM 212049/11, HM 518445/10, HM 218248/10, 594 A/529A and 580/572, which are referred to as tapered roller bearings (TRBs). The bearings consist of caged rollers, a cone, and a cup with an outside diameter that measures between
The tariff classification of parts of a CV Joint Assembly from South Korea
Descriptive information was provided with your submission. The four items in question are parts designed to be used in a Constant Velocity (CV) Joint Assembly (part number 8100005JS), which was previously classified in New York ruling N3486
The tariff classification of a guide rail assembly from India
are modified in any way, or if the goods do not conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and Border Protection (CBP) and submit a request for a new ruling in accordance with 19 CF
The tariff classification of ball bearings from Thailand
Descriptive information was provided with your submission. The items at issue are ball bearings, part numbers R-1560X2DDSD28 and 626MNDDSD28. The two bearings are configured as a single row of radial balls positioned within an inner race an
The tariff classification and country of origin of wheel bearings
wheel bearings, identified by model numbers 510070 and 510089. The steel bearings, which are designed to support axial and radial loads, consist of an outer ring, inner rings, and a double row of balls incorporated into cages. The bearings
The tariff classification of ball bearings from Indonesia
Descriptive information was provided with your submission. The articles under consideration are ball bearings, item numbers 626T1XDDP-BMC2E-01 J EA3L5, 696T12DD3MC1ERU76A J EA3L5, 696T12DD3CG4AER-01 J EA3L5, 695T12DD1MC2ER J EA3L5, and 696T
Protest and Application for Further Review No 4501-21-103251; Classification of Educational Robot Kit Parts
On September 17, 2020, CBP issued New York Ruling (“NY”) Ruling N314278 for the classification of educational robot kits parts that were used to make robots for educational robot competitions such as the First Tech Challenge (“FTC”). NY N31
The tariff classification and origin of a wheel hub unit
The tariff classification and origin of a wheel hub unit
The tariff classification of a carriage from Germany
Descriptive information was provided in the submission. The merchandise at issue is referred to as a carriage, part number SL0087N. The carriage consists of an aluminum body mounted with four steel rollers with ball bearings, concentric and
The classification and country of origin of a double flanged wheel hub assembly
Technical information was provided with your submission. The product under consideration is a double flanged wheel hub assembly with tapered bearings, without splining and anti-lock braking system (ABS) components (item number G3-842). The
The country of origin of slew bearings
Descriptive information was provided in your submission. The merchandise under consideration is referred to as slew bearings or slew rings. The slew bearings are described as rotational-element bearings that support heavy, slow rotating loa
Other codes in heading 8482
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 8482.10.50.36 from each major US trading partner.
Follow 8482.10.50.36
Get an email when a new CBP ruling cites this code, a ruling on it is revoked, or its tariff measures change.
One email per day at most. Confirm your address once, unsubscribe anytime.
Need to defend this classification?
Get the full 10-digit classification with GRI reasoning for your product, backed by cited CBP rulings and an audit trail for reasonable care.