8480.71.80.45
Injection type
Molding boxes for metal foundry; mold bases; molding patterns; molds for metal (other than ingot molds), metal carbides, glass, mineral materials, rubber or plastics: Molds for rubber or plastics: Injection or compression types: Other: Other
Duty rates
No active duty rates published for this code.
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.82.03
15.0%
Except for articles classifiable in chapters 72, 73, 74 or 76, articles where the weight of the applicable metal is less than 15 percent of the weight of the imported article, as provided for in subdivision (c) of U.S. note 16 to this subchapter
Effective from April 6, 2026
9903.82.07
10.0%
Except as provided for in headings 9903.82.12, 9903.82.17 and 9903.85.68, derivative aluminum and steel articles with an ad valorem (or ad valorem equivalent) rate of duty under column 1 less than 10 percent, as provided for in subdivisions (c)(ix)–(x) and (e) of U.S. note 16 to this subchapter
Effective from April 6, 2026 through December 31, 2027
9903.82.08
10.0%
Except as provided for in headings 9903.82.12, 9903.82.17 and 9903.85.68, derivative aluminum and steel articles with an ad valorem (or ad valorem equivalent) rate of duty under column 1 equal to or greater than 10 percent, as provided for in subdivisions (c)(ix)–(x) and (e) of U.S. note 16 to this subchapter
Effective from April 6, 2026 through December 31, 2027
9903.82.10
15.0%
Except as provided for in headings 9903.82.12, 9903.82.17 and 9903.85.68, derivative aluminum and steel articles with an ad valorem (or ad valorem equivalent) rate of duty under column 1 less than 15 percent, as provided for in subdivision (f) of U.S. note 16 to this subchapter
Effective from April 6, 2026 through December 31, 2027
9903.82.11
15.0%
Except as provided for in headings 9903.82.12, 9903.82.17 and 9903.85.68, derivative aluminum and steel articles with an ad valorem (or ad valorem equivalent) rate of duty under column 1 equal to or greater than 15 percent, as provided for in subdivision (f) of U.S. note 16 to this subchapter
Effective from April 6, 2026 through December 31, 2027
9903.82.12
The duty provided in the applicable subheading + 25%
Except as provided for in headings 9903.82.17 and 9903.85.68, derivative aluminum and steel articles the product of any country identified in general note 3(b), as provided for in subdivisions (c)(ix)–(x) of U.S. note 16 to this subchapter
Applies to origin: CU, KP, BY, RU
Effective from April 6, 2026 through December 31, 2027
9903.82.17
The duty provided in the applicable subheading + 25%
Derivative steel articles the product of the Russian Federation, as provided for in subdivision (c)(x) of U.S. note 16 to this subchapter
Applies to origin: RU
Effective from April 6, 2026 through December 31, 2027
9903.88.01
LIST_1
The duty provided in the applicable subheading plus 25%
Except as provided in headings 9903.88.05, 9903.88.06, 9903.88.07, 9903.88.08, 9903.88.10, 9903.88.11, 9903.88.14, 9903.88.19, 9903.88.50, 9903.88.52, 9903.88.58, 9903.88.60, 9903.88.62, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(a) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(b) [to this subchapter]
Applies to origin: CN
Effective from July 6, 2018
Related CBP rulings
The tariff classification of tire molds from South Korea
are modified in any way, or if the goods do not conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and Border Protection (CBP) and submit a request for a new ruling in accordance with 19 CF
The tariff classification of modular concrete formwork systems from Chile
The products in question are three modular formwork systems for molding vertical concrete walls. Referred to as Meva Imperial, Superslim, and Steel Ply, these systems will be imported complete or virtually complete, and unassembled. These a
The tariff classification of injection type molds from China
The products at issue are three steel molds which will be used in an injection molding machine for producing plastic parts. The first mold, W015-176, produces the main body of the plastic Moby baby bathtub, designed for newborns up to 25 lb
The tariff classification of an injection molding machine from Austria
The product in question is the plasticpreneur Injection Machine, Model IMK2, which you describe as a manually operated injection molding machine. The unit measures 90 x 70 x 160 cm (L x W x H) and weighs 30.5 kg. Its principal components in
The tariff classification of a tunnel formwork system from Turkey
As imported, the MESA KRTF tunnel form system constitutes a complete, steel-fabricated modular tunnel formwork system used in molding concrete into desired shapes. Once assembled at the U.S. job site, the tunnel formwork system will be comp
The country of origin of an injection type mold.
Descriptive information was provided with your request. The item under consideration is a steel mold, model number 3847, which will be used within a plastic injection molding machine. The mold produces a seat front left-half/right-half cove
The tariff classification of an injection type mold from China.
As described in your letter, the steel mold will be used in an injection molding machine for processing plastic resin. The mold produces part number P102L, which is a large lid for the Slopper Stopper® Dripless Water Bowl.
The tariff classification of plastic injection molds from China.
The Milacron X-Press A Series and X-Press B Series are plastic injection molds. These molds are comprised of a series of interchangeable steel plates and are customized to a purchasers’ specification. They are used for the injection molding
The tariff classification of Molds from China
You are importing two complete molds that consists of two parts each and weighs approximately 1000 pounds and the other weighs 500 pounds. The molds consists of two parts made of casted aluminum which is then machined by CNC (computer numer
The tariff classification of Pallets and Headers from China
The imported items are pallets and headers, also known as joint rings, used in a concrete forming machine. The pallets and headers are used in a molding process which produces concrete pipes in various shapes according to a customer’s speci
The tariff classification of an Epoxy Resin Pattern from Germany
The product being imported is called an epoxy resin pattern created by stereolithography which is a form of 3-D printing technology. The pattern is being imported to be used in the casting process for the manufacture of turbine engine blade
The tariff classification of casting assemblies from China
The casting machines in which these casting assemblies are used are designed to hold one assembly at a time. Two types of casting machines are used. The “clam shell” type is a casting machine which opens to allow an assembly to be lowered i
Other codes in heading 8480
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 8480.71.80.45 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →