8477.30.00.00
Blow-molding machines
Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this chapter; parts thereof
Duty rates
Column 1 (General / MFN)
3.1%
Column 2 (Non-NTR)
35%
Column 1 (Special / FTA)
Free
Eligible
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.88.01
LIST_1
The duty provided in the applicable subheading plus 25%
Except as provided in headings 9903.88.05, 9903.88.06, 9903.88.07, 9903.88.08, 9903.88.10, 9903.88.11, 9903.88.14, 9903.88.19, 9903.88.50, 9903.88.52, 9903.88.58, 9903.88.60, 9903.88.62, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(a) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(b) [to this subchapter]
Applies to origin: CN
Effective from July 6, 2018
Related CBP rulings
The tariff classification of an outsole roughing and sanding machine from Italy
The product in question is the Flexorobot 3D Milling and Scouring machine (“Flexorobot”). It is a robotized workstation for roughing and sanding footwear outsoles. As imported, the Flexorobot will include a rotating table for 3D blue light
The tariff classification of an injection molding machine from Austria
The product in question is the plasticpreneur Injection Machine, Model IMK2, which you describe as a manually operated injection molding machine. The unit measures 90 x 70 x 160 cm (L x W x H) and weighs 30.5 kg. Its principal components in
The tariff classification of parts of injection-molding machines from China.
, for “hot half” plates of a plastic injection molding machine for the molding of polyethylene terephthalate (PET) articles. Item No. 8292174, identified as the Backing Plate, is the interface to the injection molding machine and is mounted
The tariff classification of parts of injection-molding machines from China.
, for “cold half” plates of a plastic injection molding machine for the molding of polyethylene terephthalate (PET) articles. Item No. 8073953, identified as the Core Plate, provides a mounting interface to the moving plate. It spaces and l
Preferential Tariff Treatment of a Twin Screw Extruder under the Trade Agreement between the United States and Japan
The merchandise at issue is a specialized twin screw extruder with roller die head classifiable in subheading 8477.20.00, Harmonized Tariff Schedule of the United States (“HTSUS”). The twin screw extruder is designed to accept a rubber mix
The tariff classification of an extruder gun from Italy.
Inc. The Extruder Gun, item number 260-671NB-CP, is a mechanical device that heats rubber material which is then extruded through a nozzle. It consists of a pneumatic drive and includes five different sized tips. The gun is used to make sec
The country of origin of a 3D Printer.
(Formlabs). The Formlabs additive manufacture device, or 3-D Printer, is a device that produces three-dimensional objects through stereolithography (SLA). SLA is a process in which a liquid material, i.e., such as plastic resin, is cured in
Revocation of NY N248177 (December 18, 2013); Tariff classification of 3Doodler Create Pen Set
The facts as stated in NY N248177 are as follows: The product to be imported is the 3Doodler, a 3D drawing pen. This pen comes with a power adapter, 2 packs of ABS (acrylonitrile butadiene styrene) plastic monofilaments and 2 packs of PLA (
EREMA recycling machine; Plastic granules; Heat exchange; Application for Further Review of lead Protest Number 1601-14-100083; Protest Numbers 1601-13-100278 and 1601-13-100277.
The subject merchandise at issue in Protest No. 1601-14-100083 is identified as an EREMA recycling plant, model 1514 T-DD ecoSAVE. The function of the EREMA recycling plant is to to convert trims and scraps of thin polyester film from the m
The tariff classification of 3D Printer Modules from Singapore
The HP Jet Fusion 3D Printing Solution is a complete system that produces 3D objects using cartridges containing plastic powder materials and fluids. The three separate modules that comprise the HP Jet Fusion 3D Printing Solution are: (1) t
The tariff classification of HP Jet Fusion 3D Printing Solution from Singapore
The HP Jet Fusion 3D Printing Solution is a complete system that produces 3D objects using cartridges containing plastic powder materials and fluids. The three individual machines that make up the HP Jet Fusion 3D Printing Solution work tog
Ruling request regarding the tariff classification of certain Cutting Plotters; Harmonized Tariff Schedule of the United States (HTSUS); tariff classification of combination of certain cutting plotters imported with certain printers as functional units; Revocation by operation of law of CBP Ruling HQ 965004 (March 28, 2002); and revocation by operation of law of CBP Ruling HQ 965000 (March 28, 2002)
The articles at issue are three models of cutting plotters, which Mutoh markets under the name “Value Cut.” The cutting plotters are used with graphic printers and are imported in various sizes. Model VC-600 has a 24” cutting width, model V
Other codes in heading 8477
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 8477.30.00.00 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →