8463.90.00.80
Other
Other machine tools for working metal or cermets, without removing material: Other
Duty rates
No active duty rates published for this code.
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.88.01
LIST_1
The duty provided in the applicable subheading plus 25%
Except as provided in headings 9903.88.05, 9903.88.06, 9903.88.07, 9903.88.08, 9903.88.10, 9903.88.11, 9903.88.14, 9903.88.19, 9903.88.50, 9903.88.52, 9903.88.58, 9903.88.60, 9903.88.62, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(a) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(b) [to this subchapter]
Applies to origin: CN
Effective from July 6, 2018
Related CBP rulings
Tariff classification of a thermal break assembly machine from Belgium
The item at issue is the Aluroller EVO, a machine for producing thermal break assemblies of aluminum profiles. A thermal break assembly forms a continuous barrier between the inside and outside window frames that prevents conductive thermal
The tariff classification of an orbital riveting machine and a stamping inspection machine from Canada.
The Riveter Job Number 4902 is a pneumatic, PLC (programmable logic controller) orbital riveting machine. A pre-drilled metal stamping component and a metal ball stud are placed into the machine. Then the orbital riveter moves down while th
Reconsideration of New York Ruling Letter (NY) N158275, dated May 3, 2011; classification of machines for the manufacture of wire fencing
The merchandise involved in this request for reconsideration consists of three models of machinery – the Fixed Knot Machine, the Stiff Stay Machine, and the Hinge Joint Machine – used for the manufacture of rolls of wire fencing. In NY N158
The tariff classification of Machines for Manufacturing Wire Fencing from New Zealand
The Fixed Knot Machine, Stiff Stay Machine, and the Hinge Joint Machine are agricultural fence manufacturing machines. These fences are used in the agricultural industry to contain livestock, secure farming crops and for other agricultural
The tariff classification of a spring coiler from Sweden.
The literature included with your submission describes a spring coiler (Colombi C4 Series) used for the in-line production of compression springs and tension springs. The Colombi C4 Series is further described as being equipped with one or
The tariff classification of a bead roller kit from China
You have provided an operator’s manual for a bead roller kit, model 34104. In addition, you direct us to your website where the same item, number 34104, is described as an 18” sheet metal fabrication kit, a bench top tool that cuts, forms,
The tariff classification of machine tools, parts and accessories from Taiwan and India
The Copy Lathe Attachment, SKU 47631, is a lathe accessory used for duplicating designs from templates or other workpieces during machining operations on wood or metals. The copy attachment has an overall length of 40”, height of 7 ½” and w
The tariff classification of wire manufacturing machines from Germany
With your inquiry you submitted brochures describing various types of machines used in producing wire or wire products. The specific machines you inquired about include: M85, MM85, MMH 101/121, and MT 200 wire drawing machines, in which thi
The tariff classification of a flow forming machine from Germany
You describe the CCFF (Computer Controlled Flow Forming Machine) of the Leico ST Series as a machine used to form a seamless spun wheel from a cast aluminum pre-form that is heated to 380 degrees C. The heated pre-form is placed onto a mand
The tariff classification of a spring coiler from Sweden
The Colombi Spring Coiler is in-line spring production equipment for the manufacture of compression springs and shaped wire parts. The coiler is available in various models, e.g., the original pneumatically operated model and the newer CNC
The tariff classification of can manufacturing and processing machinery from Japan.
The Registered Embossing Machine is designed to emboss various patterns along the length of a 2-piece decorated can body. The literature describes two versions, a 24 station machine (also referred to as a 24 mandrel machine) and a single st
The tariff classification of a cold rolling wire reduction system from Italy.
The offer from the manufacturer describes a Multipass Cold Rolling Line Type LLM/DV. The line consists essentially of two tilting fingers, one payoff stand, a solid soap adding unit, three vertical capstan bull blocks, one horizontal dead b
Other codes in heading 8463
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 8463.90.00.80 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →