8462.90.80
Other
Machine tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding drawbenches); presses for working metal or metal carbides, not specified above: Other
Data provenance: Rates from HTS Revision 16 (Aug 15, 2026); trade measures verified against CBP CSMS and Federal Register notices through Aug 15, 2026.
Duty rates
Column 1 (General / MFN)
4.4%
Column 2 (Non-NTR)
30%
Column 1 (Special / FTA)
Free
Eligible
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.90.08
35%
ActiveArticles the product of the Russian Federation, as provided for in U.S. note 30(a) to this subchapter and as provided for in the subheadings enumerated in U.S. note 30(b) to this subchapter
Applies to origin: RU, BY
Effective from April 5, 2025
Rate-change history
What the rate was before, and when it changed. The government schedule replaces each revision in place; we keep the timeline.
-
NEW_PROGRAM Executive Order Feb 1, 2026 — Reciprocal Tariff (FR 2026-03824)
Section 122 reciprocal surcharge in effect — additional 10% on most imports through July 24, 2026
See the change → -
Base rate HTS 2023
Column 1 general rate set to 4.4%.
Related CBP rulings
The tariff classification of a stretch-bend-leveling line from Germany
Product information was submitted with your request. The machinery under consideration is a stretch-bend-leveling line which flattens and levels metal strip under tension to remove deformities. The machine primarily consists of a decoiler,
The tariff classification of a servo tandem press line, base plates, and a front-of-line sound wall from Japan
The tariff classification of a servo tandem press line, base plates, and a front-of-line sound wall from Japan
Application for Further Review of Protest No. 3801-21-107713; Tariff classification of aluminum extrusion line; Accounting for international freight expenses in valuation
Entry No. 788-1712468-4 contained the Press, Handling System, and Furnace to construct an aluminum extrusion line for converting aluminum logs into parts for motor homes. The subject entry was one of three shipments containing the aluminum
Application for Further Review of Protest 140120104117; Classification of a tube mill
The tube mill consists of a series of connected components that form strip steel into a square or rectangular tube. The full machine is 300 feet long, and is comprised of a strip uncoiler and accumulator, a direct flexible cold forming (FCF
Request for Reconsideration of NY N298688; Classification of Applicator
The applicator was described in NY N298688 as follows: You are importing a universal crimping tool that provides a method of applying a wide range of feed terminals to prestripped discrete wire and cable. The Ocean 2.0 Crimping Applicator w
Protest and Application for Further Review No 1704-2017-101555; Classification of a VIN Marking Machine
The subject VIN marking machine is a machine designed for marking solid surfaces and is principally used on metals. The VIN marking machine includes a mechanical scribe marking head with a pneumatic clamp mechanism and microprocessor. Each
The tariff classification of a Crimping Applicator from an unspecified country
You are importing a universal crimping tool that provides a method of applying a wide range of feed terminals to prestripped discrete wire and cable. The Ocean 2.0 Crimping Applicator works in an universal press and in most industry standar
The tariff classification of a metal press from China
The dual cylinder, hydraulic, universal multi-function metal press, i.e., the Ironworker model number Q35Y-30 (165 ton), weighs 14,100 pounds and measures 106” L x 42” W x 91” H. The Ironworker is capable of performing metal fabricating fun
The tariff classification of a Press System from China
The machine being imported is called a press system that will be used to press very fine metallic powders into blocks also known as green blocks. The press system has an electronic control system and it uses hydraulic pressure along with a
Tariff classification of a profiling, welding, and liner cutting line
The profiling, welding, and liner cutting line consists of ten units or component stations, imported together in one shipment. The ten units or component stations together make up a fully integrated manufacturing line for the processing of
The tariff classification of a Hemming Device from Germany
The importation consists of a Hemming Device used in the automotive industry to join inner and outer closure panels together (e.g., hoods, doors, tailgates, etc.). This process consists of bending/folding the flange of an outer panel over t
The tariff classification of a Bending Machine from Italy
Alta Model 401 is a heavy duty high rule manufacturing bending machine. It is able to perform the following operations: 1) Straight cut/lip (miter), 2) Bridges and 3) Bends. The Alta machine can be equipped with special cartridges which can
Other codes in heading 8462
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 8462.90.80 from each major US trading partner.
Follow 8462.90.80
Get an email when a new CBP ruling cites this code, a ruling on it is revoked, or its tariff measures change.
One email per day at most. Confirm your address once, unsubscribe anytime.
Need to defend this classification?
Get the full 10-digit classification with GRI reasoning for your product, backed by cited CBP rulings and an audit trail for reasonable care.