8462.39.00.20
Other, valued under $3,025 each
Machine tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding drawbenches); presses for working metal or metal carbides, not specified above: Slitting lines, cut-to-length lines and other shearing machines (excluding presses) for flat products, other than combined punching and shearing machines: Other
Duty rates
No active duty rates published for this code.
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.88.01
LIST_1
The duty provided in the applicable subheading plus 25%
Except as provided in headings 9903.88.05, 9903.88.06, 9903.88.07, 9903.88.08, 9903.88.10, 9903.88.11, 9903.88.14, 9903.88.19, 9903.88.50, 9903.88.52, 9903.88.58, 9903.88.60, 9903.88.62, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(a) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(b) [to this subchapter]
Applies to origin: CN
Effective from July 6, 2018
Related CBP rulings
The tariff classification of a stretch-bend-leveling line from Germany
Product information was submitted with your request. The machinery under consideration is a stretch-bend-leveling line which flattens and levels metal strip under tension to remove deformities. The machine primarily consists of a decoiler,
The tariff classification of a servo tandem press line, base plates, and a front-of-line sound wall from Japan
The tariff classification of a servo tandem press line, base plates, and a front-of-line sound wall from Japan
Application for Further Review of Protest No. 3801-21-107713; Tariff classification of aluminum extrusion line; Accounting for international freight expenses in valuation
Entry No. 788-1712468-4 contained the Press, Handling System, and Furnace to construct an aluminum extrusion line for converting aluminum logs into parts for motor homes. The subject entry was one of three shipments containing the aluminum
Application for Further Review of Protest 140120104117; Classification of a tube mill
The tube mill consists of a series of connected components that form strip steel into a square or rectangular tube. The full machine is 300 feet long, and is comprised of a strip uncoiler and accumulator, a direct flexible cold forming (FCF
Request for Reconsideration of NY N298688; Classification of Applicator
The applicator was described in NY N298688 as follows: You are importing a universal crimping tool that provides a method of applying a wide range of feed terminals to prestripped discrete wire and cable. The Ocean 2.0 Crimping Applicator w
Protest and Application for Further Review No 1704-2017-101555; Classification of a VIN Marking Machine
The subject VIN marking machine is a machine designed for marking solid surfaces and is principally used on metals. The VIN marking machine includes a mechanical scribe marking head with a pneumatic clamp mechanism and microprocessor. Each
The tariff classification of a Crimping Applicator from an unspecified country
You are importing a universal crimping tool that provides a method of applying a wide range of feed terminals to prestripped discrete wire and cable. The Ocean 2.0 Crimping Applicator works in an universal press and in most industry standar
The tariff classification of a metal press from China
The dual cylinder, hydraulic, universal multi-function metal press, i.e., the Ironworker model number Q35Y-30 (165 ton), weighs 14,100 pounds and measures 106” L x 42” W x 91” H. The Ironworker is capable of performing metal fabricating fun
The tariff classification of a Press System from China
The machine being imported is called a press system that will be used to press very fine metallic powders into blocks also known as green blocks. The press system has an electronic control system and it uses hydraulic pressure along with a
Tariff classification of a profiling, welding, and liner cutting line
The profiling, welding, and liner cutting line consists of ten units or component stations, imported together in one shipment. The ten units or component stations together make up a fully integrated manufacturing line for the processing of
The tariff classification of a Hemming Device from Germany
The importation consists of a Hemming Device used in the automotive industry to join inner and outer closure panels together (e.g., hoods, doors, tailgates, etc.). This process consists of bending/folding the flange of an outer panel over t
The tariff classification of a Bending Machine from Italy
Alta Model 401 is a heavy duty high rule manufacturing bending machine. It is able to perform the following operations: 1) Straight cut/lip (miter), 2) Bridges and 3) Bends. The Alta machine can be equipped with special cartridges which can
Other codes in heading 8462
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 8462.39.00.20 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →