8457.10.00.15
Not over 660 mm
Machining centers, unit construction machines (single station) and multistation transfer machines, for working metal: Machining centers: Other: With automatic tool changers: Vertical-spindle machines with a Y-axis travel of--
Duty rates
No active duty rates published for this code.
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.82.03
15.0%
Except for articles classifiable in chapters 72, 73, 74 or 76, articles where the weight of the applicable metal is less than 15 percent of the weight of the imported article, as provided for in subdivision (c) of U.S. note 16 to this subchapter
Effective from April 6, 2026
9903.82.07
10.0%
Except as provided for in headings 9903.82.12, 9903.82.17 and 9903.85.68, derivative aluminum and steel articles with an ad valorem (or ad valorem equivalent) rate of duty under column 1 less than 10 percent, as provided for in subdivisions (c)(ix)–(x) and (e) of U.S. note 16 to this subchapter
Effective from April 6, 2026 through December 31, 2027
9903.82.08
10.0%
Except as provided for in headings 9903.82.12, 9903.82.17 and 9903.85.68, derivative aluminum and steel articles with an ad valorem (or ad valorem equivalent) rate of duty under column 1 equal to or greater than 10 percent, as provided for in subdivisions (c)(ix)–(x) and (e) of U.S. note 16 to this subchapter
Effective from April 6, 2026 through December 31, 2027
9903.82.10
15.0%
Except as provided for in headings 9903.82.12, 9903.82.17 and 9903.85.68, derivative aluminum and steel articles with an ad valorem (or ad valorem equivalent) rate of duty under column 1 less than 15 percent, as provided for in subdivision (f) of U.S. note 16 to this subchapter
Effective from April 6, 2026 through December 31, 2027
9903.82.11
15.0%
Except as provided for in headings 9903.82.12, 9903.82.17 and 9903.85.68, derivative aluminum and steel articles with an ad valorem (or ad valorem equivalent) rate of duty under column 1 equal to or greater than 15 percent, as provided for in subdivision (f) of U.S. note 16 to this subchapter
Effective from April 6, 2026 through December 31, 2027
9903.82.12
The duty provided in the applicable subheading + 25%
Except as provided for in headings 9903.82.17 and 9903.85.68, derivative aluminum and steel articles the product of any country identified in general note 3(b), as provided for in subdivisions (c)(ix)–(x) of U.S. note 16 to this subchapter
Applies to origin: CU, KP, BY, RU
Effective from April 6, 2026 through December 31, 2027
9903.82.17
The duty provided in the applicable subheading + 25%
Derivative steel articles the product of the Russian Federation, as provided for in subdivision (c)(x) of U.S. note 16 to this subchapter
Applies to origin: RU
Effective from April 6, 2026 through December 31, 2027
9903.88.01
LIST_1
The duty provided in the applicable subheading plus 25%
Except as provided in headings 9903.88.05, 9903.88.06, 9903.88.07, 9903.88.08, 9903.88.10, 9903.88.11, 9903.88.14, 9903.88.19, 9903.88.50, 9903.88.52, 9903.88.58, 9903.88.60, 9903.88.62, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(a) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(b) [to this subchapter]
Applies to origin: CN
Effective from July 6, 2018
Related CBP rulings
The tariff classification of horizontal machining centers from Taiwan
Product information was submitted with your request. The items under consideration are described as computer numerical control (CNC) horizontal machining centers (Models MH400, MH500, MH630, MH800, MH1000) which are capable of milling, dril
The tariff classification of a Computer Numerical Control (CNC) Band Sawing Machine and a CNC Angle Punching, Marking, and Shearing Line from China
The first product at issue is a CNC Band Sawing Machine (Model BS1250). The device is a double column, high-precision horizontal sawing machine which uses a motor-driven, continuous saw blade to cut various structural steel products, includ
The tariff classification of a horizontal spindle machining center from Japan
The Okuma horizontal spindle machining center, model number MA-800, has a Y-axis travel of 1,250 mm. The unit, which was manufactured in Japan, was originally imported through the port of Savannah on August 22, 2008. The appropriate duty wa
The tariff classification and status under the North American Free Trade Agreement (NAFTA), of a horizontal machining center from Canada; Article 509
The tariff classification and status under the North American Free Trade Agreement (NAFTA), of a horizontal machining center from Canada; Article 509
The tariff classification of machine tools from Taiwan.
The tariff classification of machine tools from Taiwan.
The tariff classification of machine tools from Germany.
The Vertifront 50 CNC Vertical Turning Machine has a maximum turning diameter of 500 mm and can be used to machine such components as brake drums, friction disks, wheel hubs, differential housings and flywheels. The main drive is a 63 kW AC
The tariff classification of a transfer machine from Japan.
The tariff classification of a transfer machine from Japan.
Axis Profiler; Machining Centers; Surface Grinder; Pedestal Grinder; Lathe; Manual Milling Machine; Cut-Off Saw; EN 84.57; EN 84.58; EN 84.59; EN 84.60
Burgess Machine & Tool, Inc., has been recently incorporated in Michigan. Several pieces of equipment in use at their Canadian facility will be moved to Michigan. The merchandise in question is as follows: an Axis Profiler; two Horizontal M
The tariff classification of a used machining center fromJapan.
The tariff classification of a used machining center fromJapan.
The tariff classification of machine tools from Germany.
The tariff classification of machine tools from Germany.
The tariff classification of CNC transfer lines from Japan.
The tariff classification of CNC transfer lines from Japan.
The tariff classification of machine tools from Japan.
The tariff classification of machine tools from Japan.
Other codes in heading 8457
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 8457.10.00.15 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →