8451.21.00

Each of a dry linen capacity not exceeding 10 kg

Machinery (other than machines of heading 8450) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made up textile articles and machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics; parts thereof: Drying machines

Heading: 8451 Chapter: 84 As of August 15, 2026

Data provenance: Rates from HTS Revision 16 (Aug 15, 2026); trade measures verified against CBP CSMS and Federal Register notices through Aug 15, 2026.

Duty rates

Column 1 (General / MFN)

3.4%

Column 2 (Non-NTR)

40%

Column 1 (Special / FTA)

Free

Eligible

AAUBHCLCODEILJOKRMAOMPPAPESSG

The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.

Trade measures (Chapter 99)

No active Chapter 99 measures are linked to this code.

Rate-change history

What the rate was before, and when it changed. The government schedule replaces each revision in place; we keep the timeline.

  1. RATE_INCREASE USITC HTS Revision 2026.7

    Rate increase on 9903.82.03: 0% → 15% (Section 232 combined metals)

    See the change →
  2. SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals

    Russia aluminum 200% scope expanded: 144 HTS codes added

    See the change →
  3. SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals

    Section 232 aluminum scope expanded: 147 HTS codes added under combined-metals framework

    See the change →
  4. SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals

    Section 232 steel scope expanded: 523 HTS codes added under combined-metals framework

    See the change →
  5. NEW_PROGRAM Proclamation April 2, 2026 - Combined Metals

    Combined Section 232 metals framework introduced — 16 new Chapter 99 codes (9903.82.02–17)

    See the change →
  6. NEW_PROGRAM Executive Order Feb 1, 2026 — Reciprocal Tariff (FR 2026-03824)

    Section 122 reciprocal surcharge in effect — additional 10% on most imports through July 24, 2026

    See the change →
  7. Base rate HTS 2023

    Column 1 general rate set to 3.4%.

Related CBP rulings

N353124 September 26, 2025

The tariff classification and country of origin of a dryer gas pipe

The tariff classification and country of origin of a dryer gas pipe

H322723 December 12, 2022

Request for Internal Advice on Classification of Heat Presses

At issue are four types of heat press machines: clamshell, swing away, slide-out drawer, and multifunction. Counsel provided a list of model numbers and the images below which they state are representative of the imports at issue.    Th

H258440 March 4, 2022

Revocation of NY N255298 (July 31, 2014); Tariff classification of a solar module from an undisclosed country of origin

In NY N255298, the device is described, in relevant part, as follows: The merchandise in question is described as a Solar Surface, which is the solar generating component of the Ergosun™ Solar Roof Tile. This device consists of an ultra-thi

H304958 August 24, 2020

Application for Further Review of Protest No. 4601-19-103285; Classification of TransPro Heat Presses

The imports at issue are identified as TransPro heat presses, model numbers MP 882, MP 885, MP 886, and MP 887. The presses consist of two plates, with the upper one containing a heating element, and are used to transfer ink designs onto a

N249575 February 11, 2014

The tariff classification of ScanNCut machines from China

You have requested a ruling as to the tariff classification under the following two scenarios: (a) Brother ScanNCut cutting machines, Models #CM100DM, CM550DX and CM250 imported packaged together with its parts/accessories and (b) When sepa

N105940 June 16, 2010

The tariff classification of a textile heat-setting line from France

The heat-setting equipment in question is designed for the processing of textured synthetic yarns for carpet. Heat-setting is a saturated steam process that creates a texture to the extruded and twisted yarns. Without this process, yarns wo

H029863 April 9, 2009

Application for Further Review of Protest No. 2704-08-100508; carpet cleaning machine

The subject merchandise is described as the RED PRO Mighty Pro-R2D (“MP”) and is a hot water extraction carpet cleaning machine. The MP is said to have a power capacity of 1320W and a collection tank capacity of 9.5 liters (or 2.6 gallons).

H015049 November 26, 2008

Revocation of NY M85993 dated August 28, 2006; Classification of washers, dryers and combination washer/dryer

The merchandise at issue consists of front load washing machines, identified as model numbers WM2688H and WM0642HW, a front load combination washer/dryer identified as model number WM3677HW and three front load dryers, identified as model n

H007662 November 26, 2008

Modification of NY M85545 dated August 24, 2006; Classification of washers and dryers

The merchandise at issue consists of front load washing machines, identified as model numbers WM2077CW and WM2277H and a front load dryer, identified as model number DLE3777W. Model numbers WM2077CW and WM2277H measure 27 inches by 39 inche

N043099 November 20, 2008

The tariff classification of Components of a Spray Impregnation/Bonding Line from Germany

The merchandise, which you refer to as a “machine”, is a line of three separate machines: a spray booth, a curing oven and a winder. These machines are a portion of a larger spray impregnation/bonding line for the manufacture of nonwovens.

N017104 October 17, 2007

The tariff classification of a wringing machine from China

The X-TRACT-R is used to extract water and other fluids from pliable materials. While the device can work on textile car mats, cellular plastic sponges and leather chamois,

H007106 May 8, 2007

Electrolux Home Products plastic dryer timer knob - part no. 1316524; Modification of NY J82174

In NY J82174 the knob was described, in relevant part, as follows: 2. Part number 1316524, a plastic timer knob assembly that is used to activate the timer on a home laundry dryer. * * * All of the above knobs are made of plastic. The knobs

Other codes in heading 8451

View all codes in heading 8451 →

Duty by origin country

The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 8451.21.00 from each major US trading partner.

Follow 8451.21.00

Get an email when a new CBP ruling cites this code, a ruling on it is revoked, or its tariff measures change.

One email per day at most. Confirm your address once, unsubscribe anytime.

Need to defend this classification?

Get the full 10-digit classification with GRI reasoning for your product, backed by cited CBP rulings and an audit trail for reasonable care.