8201.10.00.00
Spades and shovels, and parts thereof
Handtools of the following kinds and base metal parts thereof: spades, shovels, mattocks, picks, hoes, forks and rakes; axes, bill hooks and similar hewing tools; secateurs and pruners of any kind; scythes, sickles, hay knives, hedge shears, timber wedges and other tools of a kind used in agriculture, horticulture or forestry
Duty rates
Column 1 (General / MFN)
Free
Column 2 (Non-NTR)
30%
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.88.03
LIST_1
The duty provided in the applicable subheading + 25%
Except as provided in headings 9903.88.13, 9903.88.18, 9903.88.33, 9903.88.34, 9903.88.35, 9903.88.36, 9903.88.37, 9903.88.38, 9903.88.40, 9903.88.41, 9903.88.43, 9903.88.45, 9903.88.46, 9903.88.48, 9903.88.56, 9903.88.64, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(e) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(f)
Applies to origin: CN
Effective from August 23, 2018
Related CBP rulings
The tariff classification of a Heavy Duty Root Buster from China and Taiwan
The item under consideration, identified as a Brush Grubber BG-18 Heavy Duty Root Buster, is used to cut tree and brush roots. It measures four feet in overall length and weighs fifteen pounds. The tool incorporates a six inch wide V-shaped
The tariff classification of two “Grubber” tools from China and Taiwan
You have referred to the two items under consideration as “Grubber” tools. They are identified as Brush Grubber BG-13 Handy Grubber and Brush Grubber BG-14 Handy Grubber Extended Reach. Model number BG-13 is approximately one foot long and
The tariff classification of gardening scissors/pruners from Japan.
The articles in your request are described as gardening scissors/pruners. You included pictures of two items and have stated that both are made of carbon steel or stainless steel. Their length is listed as between 150 mm and 190 mm. The fir
The tariff classification of garden tools and a travel bag from China
You have submitted samples, which are being returned to you. Style 951496, which you refer to as the “Bloom Gift Bag,” consists of an 8” long bypass metal pruner with spring assisted handles, a plastic trowel, a garden hose sprayer nozzle,
The tariff classification of a pruner set from China.
The submitted sample, item number 723467, consists of two shrubbery pruners identified as a Bypass Lopper and a Bypass Pruner. The Bypass Lopper is a two-handed shears with steel blades and aluminum and PVC handles. The Bypass Pruner is a o
The tariff classification of a hatchet from China.
You have described part number 61370168HQ as a stainless steel hatchet with a nylon and TPR handle. The overall length of the hatchet is 300 mm with the blade measuring 86 mm wide and 5 mm thick.
The tariff classification of a trowel and cultivator from China.
You have described item number P302AJ00101 as a stainless steel trowel. It measures 13.78” long x 3.27” wide x 1.89” high. Item P302AJ00103 is described as a stainless steel cultivator. It measures 12.2” long x 3.93” wide x 2.16” high. Each
The tariff classification of a weed extractor from Taiwan.
The sample is being returned as requested. The submitted sample, item #40024, is described as a Garden Weed Extractor. It is used to remove weeds by digging under the soil and extracting the weed’s root system. You have stated that the item
The tariff classification of a steel snow pusher from Canada.
The merchandise under consideration has been described as a 24” steel snow pusher with an ash handle and D Grip. The item number is 80973 (SNP24D). It has a stamped steel scoop blade with open sides. It is manually pushed to shift the snow
Application for further review of protest number 2809-08-100426; 19 U.S.C. §1481(a)(3); 19 C.F.R. Part 141, Subpart F; Sufficiency of Invoice to determine classification pursuant to the Harmonized Tariff Schedule of the United States
This protest arises from two entries that were made on October 31, 2005 and January 12, 2006 and liquidated on January 25, 2008. The products that are the subject of this protest are alleged to be the tool heads that are used with the Max™
The tariff classification of a weeder from Taiwan.
You describe the submitted sample, item #68260, as a Sawtooth & Claw Design Weeder. The item has a T-shaped iron handle that is connected to two carbon steel claws with saw-tooth blades. This hand-held weed removal tool measures approximate
The tariff classification of a walkway and patio weeder from China.
You describe item number 67850 as a walkway and patio weeder with extension pole. It is used to remove dirt and weeds from gardens, footpaths and patios. The item consists of two types of weeders referred to as a scraper and a groove sweepe
Other codes in heading 8201
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 8201.10.00.00 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →