7610.10.00
Doors, windows and their frames and thresholds for doors
Aluminum structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminum plates, rods, profiles, tubes and the like, prepared for use in structures
Duty rates
Column 1 (General / MFN)
5.7%
Column 2 (Non-NTR)
45%
Column 1 (Special / FTA)
Free
Eligible
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.03.01
The duty provided in the applicable subheading + 10%
Except for products described in headings 9903.03.02–9903.03.11, articles the product of any country, as provided for in subdivision (aa) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.02
The duty provided in the applicable subheading
Articles the product of any country that (1) were loaded onto a vessel at the port of loading and in transit on the final mode of transit prior to entry into the United States, before 12:01 a.m. eastern standard time on February 24, 2026; and (2) are entered for consumption, or withdrawn from warehouse for consumption, before 12:01 a.m. eastern standard time on February 28, 2026
Effective from February 24, 2026 through July 24, 2026
9903.03.03
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(ii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.04
The duty provided in the applicable subheading
Articles the product of any country, as provided for in subdivision (aa)(iii) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.05
The duty provided in the applicable subheading
Articles of civil aircraft (all aircraft other than military aircraft); their engines, parts and components; their other parts, components and subassemblies; and ground flight simulators and their parts and components of any country, provided for in subdivision (aa)(iv) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.06
The duty provided in the applicable subheading
Articles of aluminum, of steel, or of copper or derivative aluminum or steel articles; passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; parts of passenger vehicles (sedans, sport utility vehicles, crossover utility vehicles, minivans, and cargo vans) and light trucks; medium- and heavy-duty vehicles; parts of medium- and heavy-duty vehicles; wood products; and semiconductor articles, of any country, as provided in subdivision (aa)(v) of U.S. note 2 to this subchapter
Effective from February 24, 2026 through July 24, 2026
9903.03.07
The duty provided in the applicable subheading
Articles the product of Canada, as provided for in subdivision (aa)(vi) of U.S. note 2 to this subchapter
Applies to origin: CA
Effective from February 24, 2026 through July 24, 2026
9903.03.08
The duty provided in the applicable subheading
Articles the product of Mexico, as provided for in subdivision (aa)(vii) of U.S. note 2 to this subchapter
Applies to origin: MX
Effective from February 24, 2026 through July 24, 2026
9903.03.09
The duty provided in the applicable subheading
Articles of textiles or apparel the product of Costa Rica, the Dominican Republic, El Salvador, Guatemala, Honduras or Nicaragua, as provided for in subdivision (aa)(viii) of U.S. note 2 to this subchapter
Applies to origin: CR, SV, GT, HN, NI, DO
Effective from February 24, 2026 through July 24, 2026
9903.03.10
The duty provided in the applicable subheading
Articles that are donations, by persons subject to the jurisdiction of the United States, such as food, clothing and medicine, intended to be used to relieve human suffering
Effective from February 24, 2026 through July 24, 2026
9903.03.11
The duty provided in the applicable subheading
Articles that are informational materials, including but not limited to publications, films, posters, phonograph records, photographs, microfilms, microfiche, tapes, compact disks, CD ROMs, artworks and news wire feeds
Applies to origin: IL
Effective from February 24, 2026 through July 24, 2026
9903.88.15
LIST_3
The duty provided in the applicable subheading + 7.5%
Except as provided in headings 9903.88.39, 9903.88.42, 9903.88.44, 9903.88.47, 9903.88.49, 9903.88.51, 9903.88.53, 9903.88.55, 9903.88.57, 9903.88.65, 9903.88.66, 9903.88.67, 9903.88.68, or 9903.88.69, articles the product of China, as provided for in U.S. note 20(r) to this subchapter and as provided for in the subheadings enumerated in U.S. note 20(s)
Applies to origin: CN
Effective from September 24, 2018
Related CBP rulings
The tariff classification of an aluminum shower door from France
The product under consideration is an aluminum shower door (Porte de Douche) designed by Le Corbusier for use in the residence of Maison du Brésil, Cité Internationale Universitaire de Paris (CIUP). It measures 61 3/16 x 25 3/8 inches.
The country of origin determination for the purpose of eligibility under the USMCA and for the application of additional trade remedies of aluminum drip edge roof flashing
are modified in any way, or if the goods do not conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and Border Protection (CBP) and submit a request for a new ruling in accordance with 19 CF
The tariff classification of aluminum shutters from Honduras
aluminum slats that are designed for use in the assembly of storm shutter systems. The shutter systems provide protection from inclement weather, such as hurricanes, hail, high winds, or flying debris. According to your submission, the slat
The tariff classification, country of origin for marking purposes, and status under the United States-Mexico-Canada Trade Agreement (USMCA) of aluminum framework for a canopy
The tariff classification, country of origin for marking purposes, and status under the United States-Mexico-Canada Trade Agreement (USMCA) of aluminum framework for a canopy
The tariff classification, country of origin for marking purposes, and status under the United States-Mexico-Canada Trade Agreement (USMCA) of a freestanding retractable canopy
The tariff classification, country of origin for marking purposes, and status under the United States-Mexico-Canada Trade Agreement (USMCA) of a freestanding retractable canopy
The tariff classification of aluminum fence posts from Indonesia
The products to be imported are referred to as aluminum fence post and hardware “kits” used to make privacy screens and fences and identified as item numbers TRAXX102, TRAXX108, and TRAXX72. According to your submission, item numbers TRAXX1
The tariff classification, country of origin for marking purposes, country of origin for purposes of Applicability of Section 232, and status under the United States-Mexico-Canada Trade Agreement (USMCA) of aluminum fence retail kits
The tariff classification, country of origin for marking purposes, country of origin for purposes of Applicability of Section 232, and status under the United States-Mexico-Canada Trade Agreement (USMCA) of aluminum fence retail kits
The tariff classification of a three piece driveline from China
The product under consideration is identified as a three piece driveline (Part number 20722). According to your submission, the driveline is comprised of a male (Part number 30773) and female (Part number 30774) tube made from type 6005-T6
The tariff classification of aluminum extrusions from Poland
The products under consideration are identified as five types of aluminum extrusions/profiles made from type 6063 aluminum alloy. According to your submission, these extrusions will be imported in material lengths and will be used primarily
Classification of agricultural shelving from China for use in the cultivation of mushrooms
manufactured in China. You suggest that the article is properly classified in provision 9403.20.0081, Harmonized Tariff Schedule of the United States (HTSUS), which provides for other furniture and parts thereof: other metal furniture: othe
The tariff classification of aluminum sunshade fins from China
The products to be imported are aluminum sunshade fins. According to your submission, the fins are made from type 6061-T6 aluminum alloy plates that are cut to specific sizes and shapes and have a thickness from 10 mm – 12 mm. The fins are
The tariff classification of an aluminum stair stringer from China; Correction to Ruling Number N318392
The product to be imported is identified as an aluminum stair stringer. According to your submission, this powder coated stair stringer is comprised of three welded components: a main square beam, a T-shape strip which acts as the tread sup
Other codes in heading 7610
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7610.10.00 from each major US trading partner.
Need to defend this classification?
TariffLens generates GRI reasoning, cites the right CBP rulings, and builds the audit trail you need for reasonable care.
Book a demo →