7606.91.60
Clad
Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm: Other: Of aluminum, not alloyed
Data provenance: Rates from HTS Revision 16 (Aug 15, 2026); trade measures verified against CBP CSMS and Federal Register notices through Aug 15, 2026.
Duty rates
Column 1 (General / MFN)
2.7%
Column 2 (Non-NTR)
9.5%
Column 1 (Special / FTA)
Free
Eligible
The rates above are statutory column rates. Trade remedies in Chapter 99 (Section 301, 232, IEEPA, reciprocal) and FTA preferences can change the duty owed on a given entry — see below.
Trade measures (Chapter 99)
9903.90.09
35%
ActiveArticles the product of the Russian Federation, as provided for in U.S. note 30(c) to this subchapter and as provided for in the subheadings enumerated in U.S. note 30(d) to this subchapter
Applies to origin: RU, BY
Effective from April 5, 2025
9903.85.67
The duty provided in the applicable subheading + 200%
ActiveAluminum articles that are the product of Russia, or where any amount of primary aluminum used in the manufacture of the aluminum articles is smelted in Russia, or where the aluminum articles are cast in Russia, the foregoing under the terms of note 19(a)(vii)(A) to this subchapter, or note 19(m)(A) to this subchapter, as applicable per the date of entry for consumption or withdrawal from warehouse for consumption, except any exclusions that may be determined and announced by the Department of Commerce
Applies to origin: RU
Effective from January 1, 2025
Antidumping & countervailing (AD/CVD)
4 active AD/CVD orders may apply to this code. Applicability is set by the written scope of each order, not the HTS number alone.
A-570-073
AD · CN
Common Alloy Aluminum Sheet
Applicability is determined by the written scope of the order, not the HTS code alone. An order linked to this code may or may not cover a specific product.
Order details →A-525-001
AD · BH, BR, HR, EG, DE, IN, ID, IT, OM, RO, RS, SI, ZA, ES, TW, TR
all-others deposit
Common Alloy Aluminum Sheet
Applicability is determined by the written scope of the order, not the HTS code alone. An order linked to this code may or may not cover a specific product.
Order details →C-570-074
CVD · CN
all-others deposit
Common Alloy Aluminum Sheet
Applicability is determined by the written scope of the order, not the HTS code alone. An order linked to this code may or may not cover a specific product.
Order details →C-570-054
CVD · CN
all-others deposit
Certain Aluminum Foil
Applicability is determined by the written scope of the order, not the HTS code alone. An order linked to this code may or may not cover a specific product.
Order details →Rate-change history
What the rate was before, and when it changed. The government schedule replaces each revision in place; we keep the timeline.
-
SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals
Russia aluminum 200% scope expanded: 144 HTS codes added
See the change → -
SCOPE_EXPANSION Proclamation April 2, 2026 - Combined Metals
Section 232 aluminum scope expanded: 147 HTS codes added under combined-metals framework
See the change → -
NEW_PROGRAM Proclamation April 2, 2026 - Combined Metals
Combined Section 232 metals framework introduced — 16 new Chapter 99 codes (9903.82.02–17)
See the change → -
NEW_PROGRAM Executive Order Feb 1, 2026 — Reciprocal Tariff (FR 2026-03824)
Section 122 reciprocal surcharge in effect — additional 10% on most imports through July 24, 2026
See the change → -
Base rate HTS 2023
Column 1 general rate set to 2.7%.
Related CBP rulings
The tariff classification of aluminum composite panels from South Korea
are modified in any way, or if the goods do not conform to these facts at time of importation, you should bring this to the attention of U.S. Customs and Border Protection (CBP) and submit a request for a new ruling in accordance with 19 CF
Country of Origin and USMCA Eligibility of the ecoCUBE Air Purification Device
The good at issue is the ecoCUBE air purification device for large combustion engines. Like a catalytic converter in a vehicle, the ecoCUBE is designed to meet emissions standards for large internal combustion engines in industrial applicat
The tariff classification and country of origin for marking purposes of aluminum panels/sheets
described as “Panel Covers of Swimming Pool Liners.” According to your submission, aluminum sheets in coils of Chinese origin, made from type 3105 aluminum alloy and measuring 0.024 inch (0.60 millimeters) in thickness, are sent to Canada w
Internal Advice; Application for Further Review of Protest No. 5203-23-100456; Coated and Embossed Aluminum Coils; U.S.-Jordan Free Trade Agreement
The subject aluminum alloy 3003 series, temper H44 and H444 (3003-H44 and 3003-H444) coated and embossed aluminum coils, described as “pre-painted aluminum coils” on the bills of lading, were imported into the United States from Jordan und
The tariff classification of aluminum ceiling panels from China
The products to be imported are identified as aluminum composite ceiling panels and aluminum honeycomb ceiling panels. According to your submission, the aluminum composite panels measure 4 mm in thickness and consist of a polyethylene core
The tariff classification of aluminum sheet from Turkey, United Arab Emirates, Bahrain, China, Oman, and Malaysia
The product to be imported is identified as aluminum coil for use in the manufacture of gutters. According to your submission, this sheet will be made from either type 3105 or 4107 aluminum alloy and has not been coated or clad. The sheet h
Revocation of HQ 953138; Modification of NY N284130; Tariff classification of reflective aluminum composite panels
In HQ 953138, CBP described the subject merchandise as follows: A-Look is a composite material made by laminating a polyethylene core between two sheets of aluminum alloy. The silver colored surface is electroplated with a layer of nickel a
The tariff classification of aluminum coils from China
The product under consideration is described as painted aluminum alloy sheet with an Aluminum Association Series Designation (AASD) of 8011A. The aluminum sheet originates in China and will be imported in coils. The thickness of the sheet i
The tariff classification of aluminum strip from Germany
The product to be imported is described as nonalloy aluminum strip. According to your submission, this rectangular strip is comprised of 99.999% aluminum and measures 0.5 mm in thickness and 310 mm in width. The strip has not been clad and
The tariff classification of aluminum sheet from Turkey and Indonesia
The products to be imported are described as aluminum perforated sheet, aluminum solid sheet, and aluminum solid sheet with pattern made from series 3003 and 5205 aluminum alloy. You indicate these will be imported in sizes of 12 inches X 1
The tariff classification of aluminum plate from China
The product to be imported is aluminum plate. This plate, which is manufactured from 6061 aluminum alloy, measures 2.32” (58.92 mm) in thickness, 19” (482.6 mm) in width and 40.75” (1035.05 mm) in length and has a mill finish. You indicate
The tariff classification of aluminum composite panels from Taiwan or China
E. Smith Company, Inc. A representative sample was included with your submission and will be retained by this office. The products to be imported are described as aluminum composite panels used for signs. These panels consist of a polyethyl
Other codes in heading 7606
Duty by origin country
The rate above is the statutory base. Total landed duty depends on origin — see the calculated rate for 7606.91.60 from each major US trading partner.
Follow 7606.91.60
Get an email when a new CBP ruling cites this code, a ruling on it is revoked, or its tariff measures change.
One email per day at most. Confirm your address once, unsubscribe anytime.
Need to defend this classification?
Get the full 10-digit classification with GRI reasoning for your product, backed by cited CBP rulings and an audit trail for reasonable care.